diff options
-rw-r--r-- | chip/it83xx/system.c | 7 | ||||
-rw-r--r-- | include/config.h | 11 |
2 files changed, 18 insertions, 0 deletions
diff --git a/chip/it83xx/system.c b/chip/it83xx/system.c index 77e8c75746..a42134e0d4 100644 --- a/chip/it83xx/system.c +++ b/chip/it83xx/system.c @@ -72,6 +72,13 @@ static void check_reset_cause(void) chip_save_reset_flags(0); system_set_reset_flags(flags); + + /* Clear PD contract recorded in bram if this is a power-on reset. */ + if (IS_ENABLED(CONFIG_IT83XX_RESET_PD_CONTRACT_IN_BRAM) && + (flags == (EC_RESET_FLAG_POWER_ON | EC_RESET_FLAG_RESET_PIN))) { + for (int i = 0; i < MAX_SYSTEM_BBRAM_IDX_PD_PORTS; i++) + system_set_bbram((SYSTEM_BBRAM_IDX_PD0 + i), 0); + } } static void system_reset_cause_is_unknown(void) diff --git a/include/config.h b/include/config.h index cd09eed545..52807501a7 100644 --- a/include/config.h +++ b/include/config.h @@ -2339,6 +2339,17 @@ */ #undef CONFIG_IT83XX_FLASH_CLOCK_48MHZ +/* + * Enable it if EC's VBAT won't go low when system's power isn't + * presented (no battery and no AC) + * If EC's VSTBY and VBAT(power source of BRAM) aren't connected to the same + * power rail and VBAT doesn't go low immediately (eg: there is a larger + * capacitance on the rail) after all power off: PD contract recorded in BRAM + * won't get cleared (But actually we have unplugged type-c adaptor, so the + * contract should be cleared). + */ +#undef CONFIG_IT83XX_RESET_PD_CONTRACT_IN_BRAM + /* To define it, if I2C channel C and PECI used at the same time. */ #undef CONFIG_IT83XX_SMCLK2_ON_GPC7 |