diff options
| -rw-r--r-- | board/coachz/gpio.inc | 43 |
1 files changed, 41 insertions, 2 deletions
diff --git a/board/coachz/gpio.inc b/board/coachz/gpio.inc index dc76e5030c..9c7afae0ce 100644 --- a/board/coachz/gpio.inc +++ b/board/coachz/gpio.inc @@ -61,8 +61,6 @@ GPIO(QSIP_ON, PIN(5, 0), GPIO_OUT_LOW) /* Not used, for non-swit /* Power enables */ GPIO(HIBERNATE_L, PIN(5, 2), GPIO_OUT_HIGH) /* EC hibernate */ GPIO(SWITCHCAP_ON, PIN(D, 5), GPIO_OUT_LOW) /* Enable switch cap; will be configured in the board init */ -/* TODO(waihong): Remove it. The VBOB switch is for backup. */ -GPIO(VBOB_EN, PIN(D, 3), GPIO_OUT_LOW) /* Enable VBOB */ GPIO(EN_PP3300_A, PIN(A, 6), GPIO_OUT_LOW) /* Enable PP3300 */ GPIO(EN_PP5000_A, PIN(6, 7), GPIO_OUT_LOW) /* Enable PP5000 */ GPIO(EC_BL_DISABLE_L, PIN(B, 6), GPIO_OUT_LOW) /* Backlight disable signal from EC */ @@ -145,6 +143,47 @@ GPIO(SKU_ID2, PIN(D, 4), GPIO_INPUT) */ GPIO(DA9313_GPIO0, PIN(E, 2), GPIO_INPUT | GPIO_PULL_DOWN) /* Switchcap GPIO0 */ +/* Unused GPIOs, NC. Apply PU for power saving */ +UNUSED(PIN(5, 1)) +UNUSED(PIN(F, 3)) +UNUSED(PIN(3, 1)) +UNUSED(PIN(2, 7)) +UNUSED(PIN(2, 6)) +UNUSED(PIN(2, 5)) +UNUSED(PIN(2, 4)) +UNUSED(PIN(2, 3)) +UNUSED(PIN(2, 2)) +UNUSED(PIN(2, 1)) +UNUSED(PIN(2, 0)) +UNUSED(PIN(1, 7)) +UNUSED(PIN(1, 6)) +UNUSED(PIN(1, 5)) +UNUSED(PIN(1, 4)) +UNUSED(PIN(1, 3)) +UNUSED(PIN(1, 2)) +UNUSED(PIN(1, 1)) +UNUSED(PIN(1, 0)) +UNUSED(PIN(0, 7)) +UNUSED(PIN(0, 6)) +UNUSED(PIN(0, 5)) +UNUSED(PIN(9, 4)) +UNUSED(PIN(9, 7)) +UNUSED(PIN(A, 7)) +UNUSED(PIN(B, 0)) +UNUSED(PIN(A, 5)) +UNUSED(PIN(3, 5)) +UNUSED(PIN(7, 2)) +UNUSED(PIN(8, 1)) +UNUSED(PIN(7, 6)) +UNUSED(PIN(3, 4)) +UNUSED(PIN(C, 0)) +UNUSED(PIN(6, 2)) +UNUSED(PIN(8, 3)) +UNUSED(PIN(B, 1)) +UNUSED(PIN(5, 6)) +UNUSED(PIN(8, 0)) +UNUSED(PIN(D, 3)) + /* Alternate functions GPIO definitions */ ALTERNATE(PIN_MASK(6, 0x30), 0, MODULE_UART, 0) /* UART (GPIO64/65) */ ALTERNATE(PIN_MASK(B, 0x30), 1, MODULE_I2C, 0) /* I2C0 (GPIOB4/B5) */ |