diff options
| -rw-r--r-- | board/karma/gpio.inc | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/board/karma/gpio.inc b/board/karma/gpio.inc index 828c2042e6..d5b47800dc 100644 --- a/board/karma/gpio.inc +++ b/board/karma/gpio.inc @@ -36,6 +36,7 @@ GPIO(ENTERING_RW, PIN(7, 6), GPIO_OUTPUT) /* EC Entering RW */ GPIO(PMIC_INT_L, PIN(6, 0), GPIO_INPUT) /* PMIC interrupt */ GPIO(U22_90W, PIN(3, 4), GPIO_OUTPUT | GPIO_PULL_DOWN) GPIO(POWER_RATE, PIN(7, 1), GPIO_INPUT) /* High: i3/5/7. Low: Celeron */ +GPIO(PP3300_USB_PD_EN, PIN(6, 7), GPIO_OUT_HIGH) /* Initialize PP3300_USB_PD_EN as output high */ GPIO(LAN_PWR_EN, PIN(8, 3), GPIO_OUT_HIGH) /* Ethernet power enabled */ @@ -71,22 +72,26 @@ GPIO(USB1_ENABLE, PIN(3, 2), GPIO_OUT_LOW) /* Rear port, bottom */ GPIO(USB2_ENABLE, PIN(C, 6), GPIO_OUT_LOW) /* Rear port, top */ GPIO(USB3_ENABLE, PIN(A, 1), GPIO_OUT_LOW) /* Rear port, single */ GPIO(USB4_ENABLE, PIN(0, 0), GPIO_OUT_LOW) /* Front port 1 */ -GPIO(USB5_ENABLE, PIN(B, 1), GPIO_OUT_LOW) /* Front port 2 */ GPIO(USB_A_CHARGE_EN_L, PIN(A, 5), GPIO_OUT_LOW) GPIO(CEC_OUT, PIN(3, 6), GPIO_OUT_HIGH | GPIO_OPEN_DRAIN) GPIO(CEC_IN, PIN(4, 0), GPIO_INPUT) GPIO(CEC_PULL_UP, PIN(D, 3), GPIO_OUT_HIGH) -/* Board ID */ -GPIO(BOARD_VERSION1, PIN(C, 4), GPIO_INPUT) /* Board ID bit0 */ -GPIO(BOARD_VERSION2, PIN(C, 2), GPIO_INPUT) /* Board ID bit1 */ -GPIO(BOARD_VERSION3, PIN(0, 1), GPIO_INPUT) /* Board ID bit2 */ +/* Speaker */ +GPIO(SPKR5, PIN(C, 2), GPIO_INPUT) /* No function */ /* Test points */ -GPIO(TP248, PIN(5, 7), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPIO57 */ -GPIO(TP249, PIN(6, 6), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPO66_ARM_L */ -GPIO(TP250, PIN(3, 5), GPIO_INPUT | GPIO_PULL_UP) /* EC_GPIO35_TEST_L */ +GPIO(TP48, PIN(B, 1), GPIO_INPUT) +GPIO(TP52, PIN(C, 3), GPIO_INPUT) +GPIO(TP120, PIN(4, 4), GPIO_INPUT) +GPIO(TP121, PIN(3, 3), GPIO_INPUT) +GPIO(TP123, PIN(C, 5), GPIO_INPUT) +GPIO(TP127, PIN(6, 6), GPIO_INPUT) +GPIO(TP128, PIN(C, 4), GPIO_INPUT) +GPIO(TP129, PIN(0, 1), GPIO_INPUT) +GPIO(TP248, PIN(5, 7), GPIO_INPUT) +GPIO(TP250, PIN(3, 5), GPIO_INPUT) /* Alternate functions GPIO definitions */ ALTERNATE(PIN_MASK(6, 0x30), 1, MODULE_UART, 0) /* GPIO64-65 */ /* UART from EC to Servo */ |