diff options
| -rw-r--r-- | board/hatch/board.c | 1 | ||||
| -rw-r--r-- | board/hatch/board.h | 5 | ||||
| -rw-r--r-- | board/hatch/gpio.inc | 10 |
3 files changed, 10 insertions, 6 deletions
diff --git a/board/hatch/board.c b/board/hatch/board.c index cae726e504..c4178f4169 100644 --- a/board/hatch/board.c +++ b/board/hatch/board.c @@ -7,6 +7,7 @@ #include "adc.h" #include "adc_chip.h" +#include "button.h" #include "common.h" #include "driver/accel_bma2x2.h" #include "driver/accelgyro_bmi160.h" diff --git a/board/hatch/board.h b/board/hatch/board.h index f5730cccec..7ee08f8d1e 100644 --- a/board/hatch/board.h +++ b/board/hatch/board.h @@ -48,6 +48,11 @@ #define CONFIG_ALS_OPT3001 #define OPT3001_I2C_ADDR OPT3001_I2C_ADDR1 +/* Volume Button feature */ +#define CONFIG_VOLUME_BUTTONS +#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL +#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL + /* Fan features */ #define CONFIG_FANS 1 #undef CONFIG_FAN_INIT_SPEED diff --git a/board/hatch/gpio.inc b/board/hatch/gpio.inc index 8400b570ca..f7a15e04ef 100644 --- a/board/hatch/gpio.inc +++ b/board/hatch/gpio.inc @@ -35,12 +35,10 @@ GPIO_INT(USB_C0_BC12_INT_ODL, PIN(9, 5), GPIO_INT_FALLING, bc12_interrupt) GPIO_INT(USB_C1_BC12_INT_ODL, PIN(E, 4), GPIO_INT_FALLING, bc12_interrupt) GPIO_INT(HDMI_CONN_HPD, PIN(7, 2), GPIO_INT_BOTH, hdmi_hpd_interrupt) -/* - * This signal is not used by the EC for MST control, but leaving it here as an - * input as it may be useful for debugging/hw validation purposes. This can - * removed when EVT units are available. - */ -GPIO(TCPC_USB_C1_HPD, PIN(9, 3), GPIO_INPUT) + +/* Volume button interrupts */ +GPIO_INT(EC_VOLDN_BTN_ODL, PIN(9, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) +GPIO_INT(EC_VOLUP_BTN_ODL, PIN(7, 5), GPIO_INT_BOTH | GPIO_PULL_UP, button_interrupt) GPIO(SYS_RESET_L, PIN(0, 2), GPIO_ODR_HIGH) /* SYS_RST_ODL */ GPIO(ENTERING_RW, PIN(E, 3), GPIO_OUT_LOW) /* EC_ENTERING_RW */ |