diff options
-rw-r--r-- | common/build.mk | 1 | ||||
-rw-r--r-- | driver/accel_lis2ds.c | 386 | ||||
-rw-r--r-- | driver/accel_lis2ds.h | 163 | ||||
-rw-r--r-- | driver/build.mk | 1 | ||||
-rw-r--r-- | include/config.h | 2 | ||||
-rw-r--r-- | include/ec_commands.h | 1 | ||||
-rw-r--r-- | util/ectool.c | 3 |
7 files changed, 557 insertions, 0 deletions
diff --git a/common/build.mk b/common/build.mk index 84d7e31c60..11afd3e7e3 100644 --- a/common/build.mk +++ b/common/build.mk @@ -20,6 +20,7 @@ common-$(CONFIG_ACCEL_FIFO)+=motion_sense_fifo.o common-$(CONFIG_ACCEL_BMA255)+=math_util.o common-$(CONFIG_ACCEL_LIS2DW12)+=math_util.o common-$(CONFIG_ACCEL_LIS2DH)+=math_util.o +common-$(CONFIG_ACCEL_LIS2DS)+=math_util.o common-$(CONFIG_ACCEL_KXCJ9)+=math_util.o common-$(CONFIG_ACCEL_KX022)+=math_util.o ifneq ($(CORE),cortex-m) diff --git a/driver/accel_lis2ds.c b/driver/accel_lis2ds.c new file mode 100644 index 0000000000..5d13c4806a --- /dev/null +++ b/driver/accel_lis2ds.c @@ -0,0 +1,386 @@ +/* Copyright 2019 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/** + * LIS2DS Accel module for Chrome EC + * MEMS digital output motion sensor: + * ultra-low-power high-performance 3-axis "pico" accelerometer + * + * For any details on driver implementation please + * Refer to AN4748 Application Note on www.st.com + */ +#include "accelgyro.h" +#include "common.h" +#include "console.h" +#include "driver/accel_lis2ds.h" +#include "hooks.h" +#include "hwtimer.h" +#include "i2c.h" +#include "math_util.h" +#include "motion_sense_fifo.h" +#include "task.h" +#include "timer.h" +#include "util.h" + +#define CPRINTS(format, args...) cprints(CC_ACCEL, format, ## args) + +STATIC_IF(CONFIG_ACCEL_FIFO) volatile uint32_t last_interrupt_timestamp; + +/** + * lis2ds_enable_fifo - Enable/Disable FIFO in LIS2DS12 + * @s: Motion sensor pointer + * @mode: fifo_modes + */ +static int lis2ds_enable_fifo(const struct motion_sensor_t *s, int mode) +{ + return st_write_data_with_mask(s, LIS2DS_FIFO_CTRL_ADDR, + LIS2DS_FIFO_MODE_MASK, mode); +} + +/** + * Load data from internal sensor FIFO + * DIFF8 bits set means FIFO Full because 256 samples -> 0x100 + */ +static int lis2ds_load_fifo(struct motion_sensor_t *s, uint16_t nsamples, + uint32_t saved_ts) +{ + int ret, read_len, fifo_len, chunk_len, i; + struct ec_response_motion_sensor_data vect; + int *axis = s->raw_xyz; + uint8_t fifo[FIFO_READ_LEN]; + + fifo_len = nsamples * OUT_XYZ_SIZE; + read_len = 0; + + while (read_len < fifo_len) { + chunk_len = GENERIC_MIN(fifo_len - read_len, sizeof(fifo)); + + ret = st_raw_read_n_noinc(s->port, s->i2c_spi_addr_flags, + LIS2DS_OUT_X_L_ADDR, fifo, chunk_len); + if (ret != EC_SUCCESS) + return ret; + + for (i = 0; i < chunk_len; i += OUT_XYZ_SIZE) { + /* Apply precision, sensitivity and rotation vector */ + st_normalize(s, axis, &fifo[i]); + + /* Fill vector array */ + vect.data[0] = axis[0]; + vect.data[1] = axis[1]; + vect.data[2] = axis[2]; + vect.flags = 0; + vect.sensor_num = s - motion_sensors; + motion_sense_fifo_stage_data(&vect, s, 3, saved_ts); + } + + read_len += chunk_len; + }; + + return read_len; +} + +__maybe_unused static int lis2ds_config_interrupt(const struct motion_sensor_t *s) +{ + int ret = EC_SUCCESS; + + if (IS_ENABLED(CONFIG_ACCEL_FIFO)) { + /* + * Configure FIFO threshold to 1 sample: interrupt on watermark + * will be generated every time a new data sample will be stored + * in FIFO. The interrupr on watermark is cleared only when the + * number or samples still present in FIFO exceeds the + * configured threshold. + */ + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, + LIS2DS_FIFO_THS_ADDR, 1); + if (ret != EC_SUCCESS) + return ret; + + /* Enable interrupt on FIFO watermark and route to int1. */ + ret = st_write_data_with_mask(s, LIS2DS_CTRL4_ADDR, + LIS2DS_INT1_FTH, LIS2DS_EN_BIT); + if (ret != EC_SUCCESS) + return ret; + } + + return ret; +} + +/** + * lis2ds_interrupt - interrupt from int1 pin of sensor + * Schedule Motion Sense Task to manage Interrupts + */ +void lis2ds_interrupt(enum gpio_signal signal) +{ + if (IS_ENABLED(CONFIG_ACCEL_FIFO)) + last_interrupt_timestamp = __hw_clock_source_read(); + + task_set_event(TASK_ID_MOTIONSENSE, + CONFIG_ACCEL_LIS2DS_INT_EVENT, 0); +} + +/** + * lis2ds_irq_handler - bottom half of the interrupt stack. + */ +__maybe_unused static int lis2ds_irq_handler(struct motion_sensor_t *s, + uint32_t *event) +{ + int ret = EC_SUCCESS; + + if ((s->type != MOTIONSENSE_TYPE_ACCEL) || + (!(*event & CONFIG_ACCEL_LIS2DS_INT_EVENT))) + return EC_ERROR_NOT_HANDLED; + + if (IS_ENABLED(CONFIG_ACCEL_FIFO)) { + uint16_t nsamples = 0; + uint8_t fifo_src_samples[2]; + + ret = st_raw_read_n_noinc(s->port, + s->i2c_spi_addr_flags, + LIS2DS_FIFO_SRC_ADDR, + (uint8_t *)fifo_src_samples, + sizeof(fifo_src_samples)); + if (ret != EC_SUCCESS) + return ret; + + /* Check if FIFO is full. */ + if (fifo_src_samples[0] & LIS2DS_FIFO_OVR_MASK) + CPRINTS("%s FIFO Overrun", s->name); + + /* DIFF8 = 1 FIFO FULL, 256 unread samples. */ + nsamples = fifo_src_samples[1] & LIS2DS_FIFO_DIFF_MASK; + if (fifo_src_samples[0] & LIS2DS_FIFO_DIFF8_MASK) + nsamples = 256; + + ret = lis2ds_load_fifo(s, nsamples, last_interrupt_timestamp); + if (ret > 0) + motion_sense_fifo_commit_data(); + } + + return ret; +} + +/** + * set_range - set full scale range + * @s: Motion sensor pointer + * @range: Range + * @rnd: Round up/down flag + */ +static int set_range(const struct motion_sensor_t *s, int range, int rnd) +{ + int err; + uint8_t reg_val; + struct stprivate_data *data = s->drv_data; + int newrange = ST_NORMALIZE_RATE(range); + + /* Adjust and check rounded value */ + if (rnd && (newrange < range)) + newrange <<= 1; + + if (newrange > LIS2DS_ACCEL_FS_MAX_VAL) + newrange = LIS2DS_ACCEL_FS_MAX_VAL; + + reg_val = LIS2DS_FS_REG(newrange); + + mutex_lock(s->mutex); + err = st_write_data_with_mask(s, LIS2DS_FS_ADDR, LIS2DS_FS_MASK, + reg_val); + if (err == EC_SUCCESS) + /* Save internally gain for speed optimization. */ + data->base.range = newrange; + mutex_unlock(s->mutex); + + return EC_SUCCESS; +} + +static int get_range(const struct motion_sensor_t *s) +{ + struct stprivate_data *data = s->drv_data; + + return data->base.range; +} + +static int set_data_rate(const struct motion_sensor_t *s, int rate, int rnd) +{ + int ret, normalized_rate = 0; + struct stprivate_data *data = s->drv_data; + uint8_t reg_val = 0; + + mutex_lock(s->mutex); + if (IS_ENABLED(CONFIG_ACCEL_FIFO)) { + /* FIFO stop collecting events. Restart FIFO in Bypass mode */ + ret = lis2ds_enable_fifo(s, LIS2DS_FIFO_BYPASS_MODE); + if (ret != EC_SUCCESS) { + CPRINTS("Failed to disable FIFO. Error: %d", ret); + goto unlock_rate; + } + } + + /* Avoid LIS2DS_ODR_TO_REG to manage 0 mHz rate */ + if (rate > 0) { + reg_val = LIS2DS_ODR_TO_REG(rate); + normalized_rate = LIS2DS_REG_TO_ODR(reg_val); + + if (rnd && (normalized_rate < rate)) { + reg_val++; + normalized_rate = LIS2DS_REG_TO_ODR(rate); + } + + if (normalized_rate < LIS2DS_ODR_MIN_VAL || + normalized_rate > LIS2DS_ODR_MAX_VAL) { + ret = EC_RES_INVALID_PARAM; + goto unlock_rate; + } + } + + ret = st_write_data_with_mask(s, LIS2DS_ACC_ODR_ADDR, + LIS2DS_ACC_ODR_MASK, reg_val); + if (ret == EC_SUCCESS) { + data->base.odr = normalized_rate; + + if (IS_ENABLED(CONFIG_ACCEL_FIFO)) { + /* FIFO restart collecting events in Cont. mode. */ + ret = lis2ds_enable_fifo(s, LIS2DS_FIFO_CONT_MODE); + if (ret != EC_SUCCESS) + CPRINTS("Failed to enable FIFO. Error: %d", + ret); + } + } + +unlock_rate: + mutex_unlock(s->mutex); + + return ret; +} + +static int is_data_ready(const struct motion_sensor_t *s, int *ready) +{ + int ret, tmp; + + ret = st_raw_read8(s->port, s->i2c_spi_addr_flags, + LIS2DS_STATUS_REG, &tmp); + if (ret != EC_SUCCESS) { + CPRINTS("%s: type:0x%X RD XYZ Error %d", s->name, s->type, ret); + return ret; + } + + *ready = (LIS2DS_STS_XLDA_UP == (tmp & LIS2DS_STS_XLDA_UP)); + + return EC_SUCCESS; +} + +static int read(const struct motion_sensor_t *s, intv3_t v) +{ + uint8_t raw[OUT_XYZ_SIZE]; + int ret, tmp = 0; + + ret = is_data_ready(s, &tmp); + if (ret != EC_SUCCESS) + return ret; + + /* + * If sensor data is not ready, return the previous read data. + * Note: return success so that motion senor task can read again + * to get the latest updated sensor data quickly. + */ + if (!tmp) { + if (v != s->raw_xyz) + memcpy(v, s->raw_xyz, sizeof(s->raw_xyz)); + return EC_SUCCESS; + } + + /* Read 6 bytes starting at xyz_reg */ + ret = st_raw_read_n_noinc(s->port, s->i2c_spi_addr_flags, + LIS2DS_OUT_X_L_ADDR, raw, + LIS2DS_OUT_XYZ_SIZE); + if (ret != EC_SUCCESS) { + CPRINTS("%s: type:0x%X RD XYZ Error %d", s->name, s->type, ret); + return ret; + } + + /* Transform from LSB to real data with rotation and gain */ + st_normalize(s, v, raw); + + return EC_SUCCESS; +} + +static int init(const struct motion_sensor_t *s) +{ + int ret = 0, tmp; + struct stprivate_data *data = s->drv_data; + + ret = st_raw_read8(s->port, s->i2c_spi_addr_flags, + LIS2DS_WHO_AM_I_REG, &tmp); + if (ret != EC_SUCCESS) + return EC_ERROR_UNKNOWN; + + if (tmp != LIS2DS_WHO_AM_I) + return EC_ERROR_ACCESS_DENIED; + + /* + * This sensor can be powered through an EC reboot, so the state of + * the sensor is unknown here. Initiate software reset to restore + * sensor to default. + */ + mutex_lock(s->mutex); + + ret = st_raw_write8(s->port, s->i2c_spi_addr_flags, + LIS2DS_SOFT_RESET_ADDR, LIS2DS_SOFT_RESET_MASK); + if (ret != EC_SUCCESS) + goto err_unlock; + + msleep(20); + + /* Enable BDU */ + ret = st_write_data_with_mask(s, LIS2DS_BDU_ADDR, LIS2DS_BDU_MASK, + LIS2DS_EN_BIT); + if (ret != EC_SUCCESS) + goto err_unlock; + + ret = st_write_data_with_mask(s, LIS2DS_LIR_ADDR, LIS2DS_LIR_MASK, + LIS2DS_EN_BIT); + if (ret != EC_SUCCESS) + goto err_unlock; + + ret = st_write_data_with_mask(s, LIS2DS_INT2_ON_INT1_ADDR, + LIS2DS_INT2_ON_INT1_MASK, LIS2DS_EN_BIT); + if (ret != EC_SUCCESS) + goto err_unlock; + +#ifdef CONFIG_ACCEL_INTERRUPTS + ret = lis2ds_config_interrupt(s); + if (ret != EC_SUCCESS) + goto err_unlock; +#endif /* CONFIG_ACCEL_INTERRUPTS */ + + mutex_unlock(s->mutex); + + /* Set default resolution */ + data->resol = LIS2DS_RESOLUTION; + + return sensor_init_done(s); + +err_unlock: + mutex_unlock(s->mutex); + CPRINTS("%s: MS Init type:0x%X Error", s->name, s->type); + + return ret; +} + +const struct accelgyro_drv lis2ds_drv = { + .init = init, + .read = read, + .set_range = set_range, + .get_range = get_range, + .get_resolution = st_get_resolution, + .set_data_rate = set_data_rate, + .get_data_rate = st_get_data_rate, + .set_offset = st_set_offset, + .get_offset = st_get_offset, + .perform_calib = NULL, +#ifdef CONFIG_ACCEL_INTERRUPTS + .irq_handler = lis2ds_irq_handler, +#endif /* CONFIG_ACCEL_INTERRUPTS */ +}; diff --git a/driver/accel_lis2ds.h b/driver/accel_lis2ds.h new file mode 100644 index 0000000000..b8e7f544f4 --- /dev/null +++ b/driver/accel_lis2ds.h @@ -0,0 +1,163 @@ +/* Copyright 2019 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* LIS2DS accelerometer module for Chrome EC */ + +#ifndef __CROS_EC_ACCEL_LIS2DS_H +#define __CROS_EC_ACCEL_LIS2DS_H + +#include "driver/stm_mems_common.h" + +/* + * 7-bit address is 110101Xb. Where 'X' is determined + * by the voltage on the ADDR pin. + */ +#define LIS2DS_ADDR0_FLAGS 0x1a +#define LIS2DS_ADDR1_FLAGS 0x1e + +/* who am I */ +#define LIS2DS_WHO_AM_I_REG 0x0f +#define LIS2DS_WHO_AM_I 0x43 + +/* X, Y, Z axis data len */ +#define LIS2DS_OUT_XYZ_SIZE 6 + +/* COMMON DEFINE FOR ACCEL SENSOR */ +#define LIS2DS_EN_BIT 0x01 +#define LIS2DS_DIS_BIT 0x00 + +#define LIS2DS_CTRL1_ADDR 0x20 +#define LIS2DS_CTRL2_ADDR 0x21 +#define LIS2DS_CTRL3_ADDR 0x22 +#define LIS2DS_TAP_X_EN 0x20 +#define LIS2DS_TAP_Y_EN 0x10 +#define LIS2DS_TAP_Z_EN 0x08 +#define LIS2DS_TAP_EN_MASK (LIS2DS_TAP_X_EN | \ + LIS2DS_TAP_Y_EN | \ + LIS2DS_TAP_Z_EN) +#define LIS2DS_TAP_EN_ALL 0x07 + +#define LIS2DS_CTRL4_ADDR 0x23 +#define LIS2DS_INT1_FTH 0x02 +#define LIS2DS_INT1_D_TAP 0x08 +#define LIS2DS_INT1_S_TAP 0x40 + +#define LIS2DS_CTRL5_ADDR 0x24 +#define LIS2DS_FIFO_CTRL_ADDR 0x25 +#define LIS2DS_FIFO_MODE_MASK 0xe0 +#define LIS2DS_FIFO_BYPASS_MODE 0 +#define LIS2DS_FIFO_MODE 1 +#define LIS2DS_FIFO_CONT_MODE 6 + +#define LIS2DS_STATUS_REG 0x27 +#define LIS2DS_STS_XLDA_UP 0x01 +#define LIS2DS_SINGLE_TAP_UP 0x08 +#define LIS2DS_DOUBLE_TAP_UP 0x10 +#define LIS2DS_FIFO_THS_UP 0x80 + +#define LIS2DS_OUT_X_L_ADDR 0x28 +#define LIS2DS_FIFO_THS_ADDR 0x2e + +#define LIS2DS_FIFO_SRC_ADDR 0x2f +#define LIS2DS_FIFO_DIFF_MASK 0xff +#define LIS2DS_FIFO_DIFF8_MASK 0x20 +#define LIS2DS_FIFO_OVR_MASK 0x40 +#define LIS2DS_FIFO_FTH_MASK 0x80 + +/* + * Concatenated with DIFF8 bit in FIFO_SRC (2Fh) register, it represents the + * number of unread samples stored in FIFO. (000000000 = FIFO empty; + * 100000000 = FIFO full, 256 unread samples). + */ +#define LIS2DS_FIFO_SAMPLES_ADDR 0x30 +#define LIS2DS_TAP_6D_THS_ADDR 0x31 +#define LIS2DS_INT_DUR_ADDR 0x32 +#define LIS2DS_WAKE_UP_THS_ADDR 0x33 + +#define LIS2DS_TAP_SRC_ADDR 0x38 +#define LIS2DS_TAP_EVENT_DETECT 0x40 + +/* Alias Register/Mask */ +#define LIS2DS_ACC_ODR_ADDR LIS2DS_CTRL1_ADDR +#define LIS2DS_ACC_ODR_MASK 0xf0 + +#define LIS2DS_BDU_ADDR LIS2DS_CTRL1_ADDR +#define LIS2DS_BDU_MASK 0x01 + +#define LIS2DS_SOFT_RESET_ADDR LIS2DS_CTRL2_ADDR +#define LIS2DS_SOFT_RESET_MASK 0x40 + +#define LIS2DS_LIR_ADDR LIS2DS_CTRL3_ADDR +#define LIS2DS_LIR_MASK 0x04 + +#define LIS2DS_H_ACTIVE_ADDR LIS2DS_CTRL3_ADDR +#define LIS2DS_H_ACTIVE_MASK 0x02 + +#define LIS2DS_INT1_FTH_ADDR LIS2DS_CTRL4_ADDR +#define LIS2DS_INT1_FTH_MASK 0x02 + +#define LIS2DS_INT2_ON_INT1_ADDR LIS2DS_CTRL5_ADDR +#define LIS2DS_INT2_ON_INT1_MASK 0x20 + +#define LIS2DS_DRDY_PULSED_ADDR LIS2DS_CTRL5_ADDR +#define LIS2DS_DRDY_PULSED_MASK 0x80 + +/* Acc data rate for HR mode */ +enum lis2ds_odr { + LIS2DS_ODR_POWER_OFF_VAL = 0x00, + LIS2DS_ODR_12HZ_VAL, + LIS2DS_ODR_25HZ_VAL, + LIS2DS_ODR_50HZ_VAL, + LIS2DS_ODR_100HZ_VAL, + LIS2DS_ODR_200HZ_VAL, + LIS2DS_ODR_400HZ_VAL, + LIS2DS_ODR_800HZ_VAL, + LIS2DS_ODR_LIST_NUM +}; + +/* Absolute Acc rate */ +#define LIS2DS_ODR_MIN_VAL 12500 +#define LIS2DS_ODR_MAX_VAL \ + MOTION_MAX_SENSOR_FREQUENCY(800000, LIS2DS_ODR_MIN_VAL) + +/* ODR reg value from selected data rate in mHz */ +#define LIS2DS_ODR_TO_REG(_odr) (__fls(_odr / LIS2DS_ODR_MIN_VAL) + 1) + +/* Normalized ODR value from selected ODR register value */ +#define LIS2DS_REG_TO_ODR(_reg) \ + (LIS2DS_ODR_MIN_VAL << (_reg - LIS2DS_ODR_12HZ_VAL)) + +/* Full scale range registers */ +#define LIS2DS_FS_ADDR LIS2DS_CTRL1_ADDR +#define LIS2DS_FS_MASK 0x0c + +/* Acc FS value */ +enum lis2ds_fs { + LIS2DS_FS_2G_VAL = 0x00, + LIS2DS_FS_16G_VAL, + LIS2DS_FS_4G_VAL, + LIS2DS_FS_8G_VAL, + LIS2DS_FS_LIST_NUM +}; + +#define LIS2DS_ACCEL_FS_MAX_VAL 16 + +/* Reg value from Full Scale */ +#define LIS2DS_FS_REG(_fs) \ + (_fs == 2 ? LIS2DS_FS_2G_VAL : \ + _fs == 16 ? LIS2DS_FS_16G_VAL : \ + __fls(_fs)) + +/* + * Sensor resolution in number of bits. Sensor has two resolution: + * 10 and 14 bit for LP and HR mode resp. + */ +#define LIS2DS_RESOLUTION 16 + +extern const struct accelgyro_drv lis2ds_drv; + +void lis2ds_interrupt(enum gpio_signal signal); + +#endif /* __CROS_EC_ACCEL_LIS2DS_H */ diff --git a/driver/build.mk b/driver/build.mk index 79bcd729b0..9009a331e8 100644 --- a/driver/build.mk +++ b/driver/build.mk @@ -23,6 +23,7 @@ driver-$(CONFIG_MAG_LIS2MDL)+=mag_lis2mdl.o driver-$(CONFIG_SENSORHUB_LSM6DSM)+=sensorhub_lsm6dsm.o driver-$(CONFIG_SYNC)+=sync.o driver-$(CONFIG_ACCEL_LIS2DW_COMMON)+=accel_lis2dw12.o stm_mems_common.o +driver-$(CONFIG_ACCEL_LIS2DS)+=accel_lis2ds.o stm_mems_common.o # BC1.2 Charger Detection Devices driver-$(CONFIG_BC12_DETECT_MAX14637)+=bc12/max14637.o diff --git a/include/config.h b/include/config.h index dc137bac87..1b6e27cc90 100644 --- a/include/config.h +++ b/include/config.h @@ -82,6 +82,7 @@ */ #undef CONFIG_ACCEL_LIS2DE #undef CONFIG_ACCEL_LIS2DH +#undef CONFIG_ACCEL_LIS2DS #undef CONFIG_ACCEL_LNG2DM #undef CONFIG_ACCEL_LIS2D_COMMON @@ -311,6 +312,7 @@ #undef CONFIG_ACCELGYRO_BMI160_INT_EVENT #undef CONFIG_ACCEL_LSM6DSM_INT_EVENT #undef CONFIG_ACCEL_LSM6DSO_INT_EVENT +#undef CONFIG_ACCEL_LIS2DS_INT_EVENT #undef CONFIG_ACCEL_LIS2DW12_INT_EVENT #undef CONFIG_ALS_SI114X_INT_EVENT #undef CONFIG_ALS_TCS3400_INT_EVENT diff --git a/include/ec_commands.h b/include/ec_commands.h index 055432a431..b43fdd0812 100644 --- a/include/ec_commands.h +++ b/include/ec_commands.h @@ -2575,6 +2575,7 @@ enum motionsensor_chip { MOTIONSENSE_CHIP_TCS3400 = 20, MOTIONSENSE_CHIP_LIS2DW12 = 21, MOTIONSENSE_CHIP_LIS2DWL = 22, + MOTIONSENSE_CHIP_LIS2DS = 23, MOTIONSENSE_CHIP_MAX, }; diff --git a/util/ectool.c b/util/ectool.c index fe681b675f..63b8477db1 100644 --- a/util/ectool.c +++ b/util/ectool.c @@ -5036,6 +5036,9 @@ static int cmd_motionsense(int argc, char **argv) case MOTIONSENSE_CHIP_LIS2DWL: printf("lis2dwl\n"); break; + case MOTIONSENSE_CHIP_LIS2DS: + printf("lis2ds\n"); + break; default: printf("unknown\n"); } |