4 files changed, 19 insertions, 8 deletions
diff --git a/board/morphius/board.c b/board/morphius/board.c
index 35988b6723..4680109e18 100644
--- a/board/morphius/board.c
+++ b/board/morphius/board.c
@@ -383,7 +383,7 @@ static void setup_v0_charger(void)
  */
 DECLARE_HOOK(HOOK_INIT, setup_v0_charger, HOOK_PRIO_INIT_I2C);
 
-enum gpio_signal board_usbc_port_to_hpd_gpio(int port)
+int board_usbc_port_to_hpd_gpio_or_ioex(int port)
 {
 	/* USB-C0 always uses USB_C0_HPD (= DP3_HPD). */
 	if (port == 0)
diff --git a/board/morphius/board.h b/board/morphius/board.h
index 603bcec69b..a38fd93fc1 100644
--- a/board/morphius/board.h
+++ b/board/morphius/board.h
@@ -209,8 +209,15 @@ static inline bool ec_config_has_mst_hub_rtd2141b(void)
 }
 
 void motion_interrupt(enum gpio_signal signal);
-enum gpio_signal board_usbc_port_to_hpd_gpio(int port);
-#define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio(port)
+
+/**
+ * @warning Callers must use gpio_or_ioex_set_level to handle the return result
+ * since either type of signal can be returned.
+ *
+ * @return GPIO (gpio_signal) or IOEX (ioex_signal)
+ */
+int board_usbc_port_to_hpd_gpio_or_ioex(int port);
+#define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio_or_ioex(port)
 
 extern const struct usb_mux usbc0_pi3dpx1207_usb_retimer;
 extern const struct usb_mux usbc1_ps8802;
diff --git a/board/woomax/board.c b/board/woomax/board.c
index 106f21db59..f10bb227da 100644
--- a/board/woomax/board.c
+++ b/board/woomax/board.c
@@ -835,7 +835,7 @@ void hdmi_hpd_interrupt(enum gpio_signal signal)
 	hook_call_deferred(&hdmi_hpd_handler_data, (2 * MSEC));
 }
 
-enum gpio_signal board_usbc_port_to_hpd_gpio(int port)
+int board_usbc_port_to_hpd_gpio_or_ioex(int port)
 {
 	/* USB-C0 always uses USB_C0_HPD */
 	if (port == 0)
diff --git a/board/woomax/board.h b/board/woomax/board.h
index d81c82f181..f5289f2bd1 100644
--- a/board/woomax/board.h
+++ b/board/woomax/board.h
@@ -194,15 +194,19 @@ static inline bool ec_config_has_mst_hub_rtd2141b(void)
 		  HAS_MST_HUB_RTD2141B);
 }
 
-/*
+/**
+ * @warning Callers must use gpio_or_ioex_set_level to handle the return result
+ * since either type of signal can be returned.
+ *
  * USB-C0 always uses USB_C0_HPD (= DP3_HPD).
  * USB-C1 OPT1 DB uses DP2_HPD.
  * USB-C1 OPT3 DB uses DP1_HPD via RTD2141B MST hub to drive AP
  *    HPD, EC drives MST hub HPD input from USB-PD messages.
+ *
+ * @return GPIO (gpio_signal) or IOEX (ioex_signal)
  */
-
-enum gpio_signal board_usbc_port_to_hpd_gpio(int port);
-#define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio(port)
+int board_usbc_port_to_hpd_gpio_or_ioex(int port);
+#define PORT_TO_HPD(port) board_usbc_port_to_hpd_gpio_or_ioex(port)
 
 extern const struct usb_mux usbc0_pi3dpx1207_usb_retimer;
 extern const struct usb_mux usbc1_ps8802;