diff options
21 files changed, 6 insertions, 339 deletions
diff --git a/zephyr/dts/bindings/gpio/named-gpios.yaml b/zephyr/dts/bindings/gpio/named-gpios.yaml index 360e15fd9b..02415ad69d 100644 --- a/zephyr/dts/bindings/gpio/named-gpios.yaml +++ b/zephyr/dts/bindings/gpio/named-gpios.yaml @@ -6,13 +6,14 @@ child-binding: description: Named GPIOs child node include: gpio-enum-name.yaml properties: + # + # Must name this property [..-]gpios which + # is treated specially (looks for #gpio-cells + # in referenced node so that cell properties can + # be specified). gpios: type: phandle-array required: true - "#gpio-cells": - type: int - required: false - const: 0 no-auto-init: description: When set, the GPIO is not initialised, and can be diff --git a/zephyr/projects/asurada/hayato/gpio.dts b/zephyr/projects/asurada/hayato/gpio.dts index 865eefaec2..af725dfabe 100644 --- a/zephyr/projects/asurada/hayato/gpio.dts +++ b/zephyr/projects/asurada/hayato/gpio.dts @@ -8,56 +8,46 @@ compatible = "named-gpios"; power_button_l: power_button_l { - #gpio-cells = <0>; gpios = <&gpioe 4 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_POWER_BUTTON_L"; }; lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioj 7 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_ap_ec_warm_rst_req: ap_ec_warm_rst_req { - #gpio-cells = <0>; gpios = <&gpiod 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_AP_EC_WARM_RST_REQ"; }; ap_ec_watchdog_l: ap_ec_watchdog_l { - #gpio-cells = <0>; gpios = <&gpioc 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_EC_WATCHDOG_L"; }; ap_in_sleep_l: ap_in_sleep_l { - #gpio-cells = <0>; gpios = <&gpiof 2 (GPIO_INPUT_PULL_DOWN | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_IN_SLEEP_L"; }; gpio_ap_xhci_init_done: ap_xhci_init_done { - #gpio-cells = <0>; gpios = <&gpiod 2 (GPIO_INPUT_PULL_DOWN | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_AP_XHCI_INIT_DONE"; }; pmic_ec_pwrgd: pmic_ec_pwrgd { - #gpio-cells = <0>; gpios = <&gpiof 3 (GPIO_INPUT_PULL_DOWN | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_HIGH)>; enum-name = "GPIO_PMIC_EC_PWRGD"; }; gpio_accel_gyro_int_l: base_imu_int_l { - #gpio-cells = <0>; gpios = <&gpioj 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_EC_IMU_INT_L"; }; gpio_lid_accel_int_l: lid_accel_int_l { - #gpio-cells = <0>; gpios = <&gpioj 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_LID_ACCEL_INT_L"; }; @@ -66,17 +56,14 @@ enum-name = "GPIO_ALS_RGB_INT_ODL"; }; gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpiod 1 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PPC_INT_ODL"; }; gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpioj 6 GPIO_INPUT>; enum-name = "GPIO_USB_C0_BC12_INT_ODL"; }; gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpioj 4 GPIO_INPUT>; enum-name = "GPIO_USB_C1_BC12_INT_L"; }; @@ -89,7 +76,6 @@ enum-name = "GPIO_VOLUME_UP_L"; }; ac_present: ac_present { - #gpio-cells = <0>; gpios = <&gpioe 5 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; @@ -98,11 +84,9 @@ enum-name = "GPIO_WP"; }; gpio_spi0_cs: spi0_cs { - #gpio-cells = <0>; gpios = <&gpiom 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; }; gpio_x_ec_gpio2: x_ec_gpio2 { - #gpio-cells = <0>; gpios = <&gpiob 2 GPIO_ODR_HIGH>; enum-name = "GPIO_X_EC_GPIO2"; }; diff --git a/zephyr/projects/brya/brya/gpio.dts b/zephyr/projects/brya/brya/gpio.dts index 31e17c518b..f60c714899 100644 --- a/zephyr/projects/brya/brya/gpio.dts +++ b/zephyr/projects/brya/brya/gpio.dts @@ -8,17 +8,14 @@ compatible = "named-gpios"; lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_ec_wp_l: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; @@ -123,27 +120,22 @@ enum-name = "GPIO_PACKET_MODE_EN"; }; gpio_ec_accel_int_l: ec_accel_int_l { - #gpio-cells = <0>; gpios = <&gpio8 1 GPIO_INPUT>; enum-name = "GPIO_EC_ACCEL_INT"; }; gpio_ec_imu_int_l: gpio_ec_imu_int_l { - #gpio-cells = <0>; gpios = <&gpio5 6 GPIO_INPUT>; enum-name = "GPIO_EC_IMU_INT_L"; }; gpio_ec_als_rgb_int_l: gpio_ec_als_rgb_int_l { - #gpio-cells = <0>; gpios = <&gpiod 4 GPIO_INPUT>; enum-name = "GPIO_EC_ALS_RGB_INT_L"; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpio9 5 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; @@ -160,7 +152,6 @@ enum-name = "GPIO_EC_INT_L"; }; gpio_pg_ec_dsw_pwrok: pg_ec_dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpioc 7 GPIO_INPUT>; enum-name = "GPIO_PG_EC_DSW_PWROK"; }; @@ -173,7 +164,6 @@ enum-name = "GPIO_SYS_RESET_L"; }; gpio_pg_ec_rsmrst_odl: pg_ec_rsmrst_odl { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_PG_EC_RSMRST_ODL"; }; @@ -182,17 +172,14 @@ enum-name = "GPIO_PCH_RSMRST_L"; }; gpio_pg_ec_all_sys_pwrgd: pg_ec_all_sys_pwrgd { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT>; enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; }; gpio_slp_s0_l: slp_s0_l { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S0_L"; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpioa 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S3_L"; }; @@ -209,7 +196,6 @@ enum-name = "GPIO_PCH_PWRBTN_L"; }; gpio_slp_sus_l: slp_sus_l { - #gpio-cells = <0>; gpios = <&gpiof 1 GPIO_INPUT>; enum-name = "GPIO_SLP_SUS_L"; }; @@ -230,7 +216,6 @@ enum-name = "GPIO_ENABLE_BACKLIGHT"; }; gpio_ec_prochot_in_l: ec_prochot_in_l { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT>; enum-name = "GPIO_EC_PROCHOT_IN_L"; }; @@ -239,52 +224,42 @@ enum-name = "GPIO_EN_PP5000_FAN"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 7 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_usb_c0_c2_tcpc_int_odl: usb_c0_c2_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_C2_TCPC_INT_ODL"; }; gpio_usb_c1_tcpc_int_odl: usb_c1_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioa 2 GPIO_INPUT>; enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; }; gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpio6 2 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PPC_INT_ODL"; }; gpio_usb_c1_ppc_int_odl: usb_c1_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PPC_INT_ODL"; }; gpio_usb_c2_ppc_int_odl: usb_c2_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpio7 0 GPIO_INPUT>; enum-name = "GPIO_USB_C2_PPC_INT_ODL"; }; gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_INPUT>; enum-name = "GPIO_USB_C0_BC12_INT_ODL"; }; gpio_usb_c1_bc12_int_odl: usb_c1_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpio5 0 GPIO_INPUT>; enum-name = "GPIO_USB_C1_BC12_INT_ODL"; }; gpio_usb_c2_bc12_int_odl: usb_c2_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpio8 3 GPIO_INPUT>; enum-name = "GPIO_USB_C2_BC12_INT_ODL"; }; @@ -317,12 +292,10 @@ enum-name = "GPIO_USB_C2_INT_ODL"; }; usb_c0_rt_int_odl: usb_c0_rt_int_odl { - #gpio-cells = <0>; gpios = <&gpiob 1 GPIO_INPUT>; enum-name = "GPIO_USB_C0_RT_INT_ODL"; }; usb_c2_rt_int_odl: usb_c2_rt_int_odl { - #gpio-cells = <0>; gpios = <&gpio4 1 GPIO_INPUT>; enum-name = "GPIO_USB_C2_RT_INT_ODL"; }; @@ -351,13 +324,11 @@ label = "IOEX_USB_C0_FRS_EN"; }; usb_c0_rt_rst_odl: usb_c0_rt_rst_odl { - #gpio-cells = <0>; gpios = <&ioex_port1 7 GPIO_ODR_HIGH>; enum-name = "IOEX_USB_C0_RT_RST_ODL"; label = "IOEX_USB_C0_RT_RST_ODL"; }; usb_c2_rt_rst_odl: usb_c2_rt_rst_odl { - #gpio-cells = <0>; gpios = <&ioex_port2 2 GPIO_ODR_HIGH>; enum-name = "IOEX_USB_C2_RT_RST_ODL"; label = "IOEX_USB_C2_RT_RST_ODL"; diff --git a/zephyr/projects/corsola/gpio_kingler.dts b/zephyr/projects/corsola/gpio_kingler.dts index d3dc66124d..58aac30941 100644 --- a/zephyr/projects/corsola/gpio_kingler.dts +++ b/zephyr/projects/corsola/gpio_kingler.dts @@ -25,19 +25,16 @@ gpios = <&gpio4 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; }; ap_ec_warm_rst_req: ap_ec_warm_rst_req { - #gpio-cells = <0>; gpios = <&gpio5 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_HIGH)>; enum-name = "GPIO_AP_EC_WARM_RST_REQ"; }; ap_ec_wdtrst_l: ap_ec_wdtrst_l { - #gpio-cells = <0>; gpios = <&gpio5 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_EC_WDTRST_L"; }; ap_in_sleep_l: ap_in_sleep_l { - #gpio-cells = <0>; gpios = <&gpio5 4 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_IN_SLEEP_L"; @@ -89,7 +86,6 @@ enum-name = "GPIO_EC_PEN_CHG_DIS_ODL"; }; gpio_ec_wp_l: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioe 3 (GPIO_OPEN_DRAIN)>; enum-name = "GPIO_WP_L"; }; @@ -110,7 +106,6 @@ enum-name = "GPIO_KBD_KSO2"; }; gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpio8 3 GPIO_INPUT>; enum-name = "GPIO_USB_C0_BC12_INT_ODL"; }; @@ -127,17 +122,14 @@ enum-name = "GPIO_EC_RST_ODL"; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; @@ -150,24 +142,19 @@ enum-name = "GPIO_PACKET_MODE_EN"; }; gpio_x_ec_gpio2: x_ec_gpio2 { - #gpio-cells = <0>; - #gpio-cells = <0>; gpios = <&gpiod 4 GPIO_INPUT>; enum-name = "GPIO_X_EC_GPIO2"; }; ap_sysrst_odl_r: ap_sysrst_odl_r { - #gpio-cells = <0>; gpios = <&gpioa 1 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_EC_SYSRST_ODL"; }; gpio_ap_xhci_init_done: ap_xhci_init_done { - #gpio-cells = <0>; gpios = <&gpioa 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_AP_XHCI_INIT_DONE"; }; gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpio6 7 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PPC_INT_ODL"; }; @@ -192,7 +179,6 @@ enum-name = "GPIO_EC_X_GPIO3"; }; gpio_usb_c0_tcpc_int_odl: usb_c0_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpio7 3 GPIO_INPUT>; enum-name = "GPIO_USB_C0_TCPC_INT_ODL"; }; @@ -213,7 +199,6 @@ enum-name = "GPIO_EN_PP5000_Z2"; }; gpio_usb_c1_tcpc_int_odl: usb_c1_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 1 GPIO_INPUT>; enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; }; @@ -234,12 +219,10 @@ enum-name = "GPIO_EC_PMIC_EN_ODL"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_INPUT>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_VOLUME_DOWN_L"; }; diff --git a/zephyr/projects/corsola/gpio_krabby.dts b/zephyr/projects/corsola/gpio_krabby.dts index 705a08d753..0d04068fd5 100644 --- a/zephyr/projects/corsola/gpio_krabby.dts +++ b/zephyr/projects/corsola/gpio_krabby.dts @@ -11,69 +11,56 @@ compatible = "named-gpios"; power_button_l: power_button_l { - #gpio-cells = <0>; gpios = <&gpioe 4 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioj 7 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; ap_ec_warm_rst_req: ap_ec_warm_rst_req { - #gpio-cells = <0>; gpios = <&gpiod 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_HIGH)>; enum-name = "GPIO_AP_EC_WARM_RST_REQ"; }; ap_in_sleep_l: ap_in_sleep_l { - #gpio-cells = <0>; gpios = <&gpiob 6 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_IN_SLEEP_L"; }; base_imu_int_l: base_imu_int_l { - #gpio-cells = <0>; gpios = <&gpiom 3 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_BASE_IMU_INT_L"; }; lid_accel_int_l: lid_accel_int_l { - #gpio-cells = <0>; gpios = <&gpiom 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_LID_ACCEL_INT_L"; }; volume_down_l: volume_down_l { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_INPUT>; enum-name = "GPIO_VOLUME_DOWN_L"; }; volume_up_l: volume_up_l { - #gpio-cells = <0>; gpios = <&gpiod 6 GPIO_INPUT>; enum-name = "GPIO_VOLUME_UP_L"; }; ap_xhci_init_done: ap_xhci_init_done { - #gpio-cells = <0>; gpios = <&gpioj 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_AP_XHCI_INIT_DONE"; }; ac_present: ac_present { - #gpio-cells = <0>; gpios = <&gpioe 5 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; ec_flash_wp_odl: ec_flash_wp_odl { - #gpio-cells = <0>; gpios = <&gpioi 4 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; enum-name = "GPIO_WP_L"; }; spi0_cs: spi0_cs { - #gpio-cells = <0>; gpios = <&gpiom 5 (GPIO_INPUT | GPIO_VOLTAGE_1P8)>; }; x_ec_gpio2: x_ec_gpio2 { @@ -109,13 +96,11 @@ enum-name = "GPIO_EC_BL_EN_OD"; }; ap_sysrst_odl_r: ap_ec_sysrst_odl { - #gpio-cells = <0>; gpios = <&gpioj 2 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_EC_SYSRST_ODL"; }; ap_ec_wdtrst_l: ap_ec_wdtrst_l { - #gpio-cells = <0>; gpios = <&gpioc 7 (GPIO_INPUT | GPIO_VOLTAGE_1P8 | GPIO_ACTIVE_LOW)>; enum-name = "GPIO_AP_EC_WDTRST_L"; diff --git a/zephyr/projects/herobrine/gpio.dts b/zephyr/projects/herobrine/gpio.dts index ff3340fdb0..7f31aab9e4 100644 --- a/zephyr/projects/herobrine/gpio.dts +++ b/zephyr/projects/herobrine/gpio.dts @@ -8,92 +8,74 @@ compatible = "named-gpios"; gpio_usb_c0_pd_int_odl: usb_c0_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PD_INT_ODL"; }; gpio_usb_c1_pd_int_odl: usb_c1_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PD_INT_ODL"; }; gpio_usb_c0_swctl_int_odl: usb_c0_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_INPUT>; enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; }; gpio_usb_c1_swctl_int_odl: usb_c1_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio4 0 GPIO_INPUT>; enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; }; gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C0_BC12_INT_L"; }; gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C1_BC12_INT_L"; }; gpio_usb_a0_oc_odl: usb_a0_oc_odl { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_A0_OC_ODL"; }; gpio_chg_acok_od: chg_acok_od { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio6 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpioc 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_ec_wp_odl: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpiod 3 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_lid_open_ec: lid_open_ec { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_ap_rst_l: ap_rst_l { - #gpio-cells = <0>; gpios = <&gpio5 1 GPIO_INPUT>; enum-name = "GPIO_AP_RST_L"; }; gpio_ps_hold: ps_hold { - #gpio-cells = <0>; gpios = <&gpioa 6 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_PS_HOLD"; }; gpio_ap_suspend: ap_suspend { - #gpio-cells = <0>; gpios = <&gpio5 7 GPIO_INPUT>; enum-name = "GPIO_AP_SUSPEND"; }; gpio_mb_power_good: mb_power_good { - #gpio-cells = <0>; gpios = <&gpio3 7 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_POWER_GOOD"; }; gpio_warm_reset_l: warm_reset_l { - #gpio-cells = <0>; gpios = <&gpiob 0 GPIO_INPUT>; enum-name = "GPIO_WARM_RESET_L"; }; @@ -101,17 +83,14 @@ gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_accel_gyro_int_l: accel_gyro_int_l { - #gpio-cells = <0>; gpios = <&gpioa 3 GPIO_INPUT>; enum-name = "GPIO_ACCEL_GYRO_INT_L"; }; gpio_rtc_ec_wake_odl: rtc_ec_wake_odl { - #gpio-cells = <0>; gpios = <&gpio0 2 GPIO_INPUT>; enum-name = "GPIO_EC_RST_ODL"; }; diff --git a/zephyr/projects/nissa/nereid_generated.dts b/zephyr/projects/nissa/nereid_generated.dts index 63e88bf83f..2f48f7c08c 100644 --- a/zephyr/projects/nissa/nereid_generated.dts +++ b/zephyr/projects/nissa/nereid_generated.dts @@ -36,239 +36,186 @@ compatible = "named-gpios"; gpio_acc_int_l: acc_int_l { - #gpio-cells = <0>; gpios = <&gpioc 0 GPIO_INPUT>; }; gpio_all_sys_pwrgd: all_sys_pwrgd { - #gpio-cells = <0>; gpios = <&gpiob 7 GPIO_INPUT>; }; gpio_ccd_mode_odl: ccd_mode_odl { - #gpio-cells = <0>; gpios = <&gpioh 5 GPIO_INPUT>; enum-name = "GPIO_CCD_MODE_ODL"; }; gpio_cpu_c10_gate_l: cpu_c10_gate_l { - #gpio-cells = <0>; gpios = <&gpiog 1 GPIO_INPUT>; enum-name = "GPIO_CPU_C10_GATE_L"; }; gpio_ec_battery_pres_odl: ec_battery_pres_odl { - #gpio-cells = <0>; gpios = <&gpioi 4 GPIO_INPUT>; enum-name = "GPIO_BATT_PRES_ODL"; }; gpio_ec_cbi_wp: ec_cbi_wp { - #gpio-cells = <0>; gpios = <&gpioj 5 GPIO_OUTPUT>; }; gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - #gpio-cells = <0>; gpios = <&gpiok 4 GPIO_ODR_HIGH>; enum-name = "GPIO_ENABLE_BACKLIGHT"; }; gpio_ec_entering_rw: ec_entering_rw { - #gpio-cells = <0>; gpios = <&gpioc 7 GPIO_OUTPUT>; enum-name = "GPIO_ENTERING_RW"; }; gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - #gpio-cells = <0>; gpios = <&gpioh 1 GPIO_INPUT>; enum-name = "GPIO_PACKET_MODE_EN"; }; gpio_ec_prochot_odl: ec_prochot_odl { - #gpio-cells = <0>; gpios = <&gpioi 1 GPIO_INPUT>; }; gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpiol 7 GPIO_OUTPUT>; }; gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - #gpio-cells = <0>; gpios = <&gpiok 7 GPIO_OUTPUT>; enum-name = "GPIO_EC_SOC_HDMI_HPD"; }; gpio_ec_soc_int_odl: ec_soc_int_odl { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_ODR_LOW>; enum-name = "GPIO_EC_INT_L"; }; gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - #gpio-cells = <0>; gpios = <&gpiod 6 GPIO_ODR_HIGH>; }; gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpiob 6 GPIO_ODR_LOW>; }; gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - #gpio-cells = <0>; gpios = <&gpioh 0 GPIO_OUTPUT>; }; gpio_ec_soc_rtcrst: ec_soc_rtcrst { - #gpio-cells = <0>; gpios = <&gpiok 2 GPIO_OUTPUT>; }; gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - #gpio-cells = <0>; gpios = <&gpiof 2 GPIO_OUTPUT>; }; gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - #gpio-cells = <0>; gpios = <&gpioe 5 GPIO_ODR_HIGH>; }; gpio_ec_soc_wake_odl: ec_soc_wake_odl { - #gpio-cells = <0>; gpios = <&gpiob 2 GPIO_ODR_LOW>; enum-name = "GPIO_EC_PCH_WAKE_ODL"; }; gpio_ec_wp_odl: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioa 6 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_en_kb_bl: en_kb_bl { - #gpio-cells = <0>; gpios = <&gpioj 3 GPIO_OUTPUT>; enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; }; gpio_en_pp3300_s5: en_pp3300_s5 { - #gpio-cells = <0>; gpios = <&gpioc 5 GPIO_OUTPUT>; }; gpio_en_pp5000_pen_x: en_pp5000_pen_x { - #gpio-cells = <0>; gpios = <&gpiob 5 GPIO_OUTPUT>; enum-name = "GPIO_EN_PP5000_PEN_X"; }; gpio_en_pp5000_s5: en_pp5000_s5 { - #gpio-cells = <0>; gpios = <&gpiok 5 GPIO_OUTPUT>; }; gpio_en_slp_z: en_slp_z { - #gpio-cells = <0>; gpios = <&gpiok 3 GPIO_OUTPUT>; }; gpio_en_usb_a0_vbus: en_usb_a0_vbus { - #gpio-cells = <0>; gpios = <&gpiol 6 GPIO_OUTPUT>; }; gpio_en_usb_c0_cc1_vconn: en_usb_c0_cc1_vconn { - #gpio-cells = <0>; gpios = <&gpioh 4 GPIO_OUTPUT>; }; gpio_en_usb_c0_cc2_vconn: en_usb_c0_cc2_vconn { - #gpio-cells = <0>; gpios = <&gpioh 6 GPIO_OUTPUT>; }; gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_hdmi_sel: hdmi_sel { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_OUTPUT>; enum-name = "GPIO_HDMI_SEL"; }; gpio_imu_int_l: imu_int_l { - #gpio-cells = <0>; gpios = <&gpioj 0 GPIO_INPUT>; }; gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - #gpio-cells = <0>; gpios = <&gpioj 4 GPIO_INPUT>; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpiof 3 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_pen_detect_odl: pen_detect_odl { - #gpio-cells = <0>; gpios = <&gpioj 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_PEN_DETECT_ODL"; }; gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - #gpio-cells = <0>; gpios = <&gpiod 3 GPIO_INPUT>; enum-name = "GPIO_PG_PP1050_MEM_S3_OD"; }; gpio_pg_pp1050_proc: pg_pp1050_proc { - #gpio-cells = <0>; gpios = <&gpiol 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_PG_PP1050_PROC"; }; gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - #gpio-cells = <0>; gpios = <&gpioe 3 GPIO_INPUT>; }; gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - #gpio-cells = <0>; gpios = <&gpioe 1 GPIO_INPUT_PULL_UP>; }; gpio_slp_s0_l: slp_s0_l { - #gpio-cells = <0>; gpios = <&gpioe 4 GPIO_INPUT>; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpioh 3 GPIO_INPUT>; }; gpio_slp_s4_l: slp_s4_l { - #gpio-cells = <0>; gpios = <&gpioi 5 GPIO_INPUT>; }; gpio_slp_sus_l: slp_sus_l { - #gpio-cells = <0>; gpios = <&gpiog 2 GPIO_INPUT>; }; gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - #gpio-cells = <0>; gpios = <&gpiof 1 GPIO_OUTPUT>; enum-name = "GPIO_SUB_USB_A1_ILIMIT_SDP"; }; gpio_sys_rst_odl: sys_rst_odl { - #gpio-cells = <0>; gpios = <&gpiod 1 GPIO_ODR_HIGH>; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioa 7 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - #gpio-cells = <0>; gpios = <&gpiol 5 GPIO_OUTPUT>; enum-name = "GPIO_USB_A0_ILIMIT_SDP"; }; gpio_usb_c0_frs: usb_c0_frs { - #gpio-cells = <0>; gpios = <&gpioc 4 GPIO_OUTPUT>; }; gpio_usb_c0_int_odl: usb_c0_int_odl { - #gpio-cells = <0>; gpios = <&gpiok 0 GPIO_INPUT_PULL_UP>; }; gpio_vccin_aux_vid0: vccin_aux_vid0 { - #gpio-cells = <0>; gpios = <&gpiod 0 GPIO_INPUT>; enum-name = "GPIO_VCCIN_AUX_VID0"; }; gpio_vccin_aux_vid1: vccin_aux_vid1 { - #gpio-cells = <0>; gpios = <&gpiok 1 GPIO_INPUT>; enum-name = "GPIO_VCCIN_AUX_VID1"; }; gpio_voldn_btn_odl: voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpioi 6 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_volup_btn_odl: volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpioi 7 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; diff --git a/zephyr/projects/nissa/nereid_overlay.dts b/zephyr/projects/nissa/nereid_overlay.dts index f513594b38..4c15354383 100644 --- a/zephyr/projects/nissa/nereid_overlay.dts +++ b/zephyr/projects/nissa/nereid_overlay.dts @@ -57,23 +57,19 @@ named-gpios { gpio_sb_1: sb_1 { - #gpio-cells = <0>; gpios = <&gpioe 6 GPIO_INPUT_PULL_UP>; no-auto-init; }; gpio_sb_2: sb_2 { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_OUTPUT>; no-auto-init; }; gpio_sb_3: sb_3 { - #gpio-cells = <0>; gpios = <&gpioe 7 GPIO_OPEN_DRAIN>; no-auto-init; }; gpio_sb_4: sb_4 { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; no-auto-init; }; @@ -195,7 +191,6 @@ pagesize = <16>; address-width = <8>; timeout = <5>; - wp-gpios = <&gpio_ec_wp_odl>; }; }; diff --git a/zephyr/projects/nissa/nivviks_generated.dts b/zephyr/projects/nissa/nivviks_generated.dts index c5e6c38b34..53e07b8cda 100644 --- a/zephyr/projects/nissa/nivviks_generated.dts +++ b/zephyr/projects/nissa/nivviks_generated.dts @@ -31,218 +31,168 @@ compatible = "named-gpios"; gpio_acc_int_l: acc_int_l { - #gpio-cells = <0>; gpios = <&gpio5 0 GPIO_INPUT>; }; gpio_all_sys_pwrgd: all_sys_pwrgd { - #gpio-cells = <0>; gpios = <&gpioa 7 GPIO_INPUT>; }; gpio_ccd_mode_odl: ccd_mode_odl { - #gpio-cells = <0>; gpios = <&gpioe 5 GPIO_INPUT>; enum-name = "GPIO_CCD_MODE_ODL"; }; gpio_cpu_c10_gate_l: cpu_c10_gate_l { - #gpio-cells = <0>; gpios = <&gpio6 7 GPIO_INPUT>; }; gpio_ec_battery_pres_odl: ec_battery_pres_odl { - #gpio-cells = <0>; gpios = <&gpioa 3 GPIO_INPUT>; enum-name = "GPIO_BATT_PRES_ODL"; }; gpio_ec_edp_bl_en_od: ec_edp_bl_en_od { - #gpio-cells = <0>; gpios = <&gpiod 3 GPIO_ODR_HIGH>; enum-name = "GPIO_ENABLE_BACKLIGHT"; }; gpio_ec_entering_rw: ec_entering_rw { - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_OUTPUT>; enum-name = "GPIO_ENTERING_RW"; }; gpio_ec_gsc_packet_mode: ec_gsc_packet_mode { - #gpio-cells = <0>; gpios = <&gpio7 5 GPIO_INPUT>; enum-name = "GPIO_PACKET_MODE_EN"; }; gpio_ec_kso_02_inv: ec_kso_02_inv { - #gpio-cells = <0>; gpios = <&gpio1 7 GPIO_OUTPUT>; enum-name = "GPIO_KBD_KSO2"; }; gpio_ec_prochot_odl: ec_prochot_odl { - #gpio-cells = <0>; gpios = <&gpiof 1 GPIO_INPUT>; }; gpio_ec_soc_dsw_pwrok: ec_soc_dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpio6 1 GPIO_OUTPUT>; }; gpio_ec_soc_hdmi_hpd: ec_soc_hdmi_hpd { - #gpio-cells = <0>; gpios = <&gpioe 4 GPIO_OUTPUT>; }; gpio_ec_soc_int_odl: ec_soc_int_odl { - #gpio-cells = <0>; gpios = <&gpio8 0 GPIO_ODR_LOW>; enum-name = "GPIO_EC_INT_L"; }; gpio_ec_soc_pch_pwrok_od: ec_soc_pch_pwrok_od { - #gpio-cells = <0>; gpios = <&gpio7 2 GPIO_ODR_HIGH>; }; gpio_ec_soc_pwr_btn_odl: ec_soc_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpioc 1 GPIO_ODR_LOW>; enum-name = "GPIO_PCH_PWRBTN_L"; }; gpio_ec_soc_rsmrst_l: ec_soc_rsmrst_l { - #gpio-cells = <0>; gpios = <&gpioa 6 GPIO_OUTPUT>; }; gpio_ec_soc_rtcrst: ec_soc_rtcrst { - #gpio-cells = <0>; gpios = <&gpio7 6 GPIO_OUTPUT>; }; gpio_ec_soc_sys_pwrok: ec_soc_sys_pwrok { - #gpio-cells = <0>; gpios = <&gpio3 7 GPIO_OUTPUT>; }; gpio_ec_soc_vccst_pwrgd_od: ec_soc_vccst_pwrgd_od { - #gpio-cells = <0>; gpios = <&gpioa 4 GPIO_ODR_HIGH>; }; gpio_ec_soc_wake_odl: ec_soc_wake_odl { - #gpio-cells = <0>; gpios = <&gpiob 0 GPIO_ODR_LOW>; enum-name = "GPIO_EC_PCH_WAKE_ODL"; }; gpio_ec_wp_odl: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_en_kb_bl: en_kb_bl { - #gpio-cells = <0>; gpios = <&gpioa 0 GPIO_OUTPUT>; enum-name = "GPIO_EN_KEYBOARD_BACKLIGHT"; }; gpio_en_pp3300_s5: en_pp3300_s5 { - #gpio-cells = <0>; gpios = <&gpiob 6 GPIO_OUTPUT>; }; gpio_en_pp5000_pen_x: en_pp5000_pen_x { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_OUTPUT>; }; gpio_en_pp5000_s5: en_pp5000_s5 { - #gpio-cells = <0>; gpios = <&gpio4 0 GPIO_OUTPUT>; }; gpio_en_slp_z: en_slp_z { - #gpio-cells = <0>; gpios = <&gpioe 1 GPIO_OUTPUT>; }; gpio_en_usb_a0_vbus: en_usb_a0_vbus { - #gpio-cells = <0>; gpios = <&gpio9 1 GPIO_OUTPUT>; }; gpio_gsc_ec_pwr_btn_odl: gsc_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_hdmi_sel: hdmi_sel { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_OUTPUT>; }; gpio_imu_int_l: imu_int_l { - #gpio-cells = <0>; gpios = <&gpio5 6 GPIO_INPUT>; }; gpio_imvp91_vrrdy_od: imvp91_vrrdy_od { - #gpio-cells = <0>; gpios = <&gpio4 3 GPIO_INPUT>; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_pen_detect_odl: pen_detect_odl { - #gpio-cells = <0>; gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; }; gpio_pg_pp1050_mem_s3_od: pg_pp1050_mem_s3_od { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT>; }; gpio_pg_pp1050_proc: pg_pp1050_proc { - #gpio-cells = <0>; gpios = <&gpio4 1 GPIO_INPUT_PULL_UP>; }; gpio_pg_pp5000_s5_od: pg_pp5000_s5_od { - #gpio-cells = <0>; gpios = <&gpio4 2 GPIO_INPUT>; }; gpio_rsmrst_pwrgd_l: rsmrst_pwrgd_l { - #gpio-cells = <0>; gpios = <&gpio9 4 GPIO_INPUT_PULL_UP>; }; gpio_slp_s0_l: slp_s0_l { - #gpio-cells = <0>; gpios = <&gpio9 7 GPIO_INPUT>; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpioa 5 GPIO_INPUT>; }; gpio_slp_s4_l: slp_s4_l { - #gpio-cells = <0>; gpios = <&gpio7 0 GPIO_INPUT>; }; gpio_slp_sus_l: slp_sus_l { - #gpio-cells = <0>; gpios = <&gpio6 2 GPIO_INPUT>; }; gpio_sub_usb_a1_ilimit_sdp: sub_usb_a1_ilimit_sdp { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_OUTPUT>; }; gpio_sys_rst_odl: sys_rst_odl { - #gpio-cells = <0>; gpios = <&gpioc 5 GPIO_ODR_HIGH>; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpio9 5 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_usb_a0_ilimit_sdp: usb_a0_ilimit_sdp { - #gpio-cells = <0>; gpios = <&gpio8 5 GPIO_OUTPUT>; }; gpio_usb_c0_int_odl: usb_c0_int_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT_PULL_UP>; }; gpio_vccin_aux_vid0: vccin_aux_vid0 { - #gpio-cells = <0>; gpios = <&gpio9 2 GPIO_INPUT>; }; gpio_vccin_aux_vid1: vccin_aux_vid1 { - #gpio-cells = <0>; gpios = <&gpioe 3 GPIO_INPUT>; }; gpio_voldn_btn_odl: voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_volup_btn_odl: volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpioa 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; diff --git a/zephyr/projects/nissa/nivviks_overlay.dts b/zephyr/projects/nissa/nivviks_overlay.dts index 24b0f6ee03..78cc76687e 100644 --- a/zephyr/projects/nissa/nivviks_overlay.dts +++ b/zephyr/projects/nissa/nivviks_overlay.dts @@ -72,24 +72,20 @@ named-gpios { gpio_sb_1: sb_1 { - #gpio-cells = <0>; gpios = <&gpio0 2 GPIO_PULL_UP>; no-auto-init; }; gpio_sb_2: sb_2 { - #gpio-cells = <0>; gpios = <&gpiod 4 GPIO_OUTPUT>; no-auto-init; }; gpio_sb_3: sb_3 { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_OPEN_DRAIN>; no-auto-init; }; gpio_sb_4: sb_4 { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; no-auto-init; }; @@ -213,7 +209,6 @@ pagesize = <16>; address-width = <8>; timeout = <5>; - wp-gpios = <&gpio_ec_wp_odl>; }; }; diff --git a/zephyr/projects/npcx_evb/npcx7/gpio.dts b/zephyr/projects/npcx_evb/npcx7/gpio.dts index fd9a195673..a60d653d7e 100644 --- a/zephyr/projects/npcx_evb/npcx7/gpio.dts +++ b/zephyr/projects/npcx_evb/npcx7/gpio.dts @@ -15,17 +15,14 @@ enum-name = "GPIO_WP_L"; }; gpio_ac_present: ac_present { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_power_button_l: power_button_l { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; diff --git a/zephyr/projects/npcx_evb/npcx9/gpio.dts b/zephyr/projects/npcx_evb/npcx9/gpio.dts index fd9a195673..a60d653d7e 100644 --- a/zephyr/projects/npcx_evb/npcx9/gpio.dts +++ b/zephyr/projects/npcx_evb/npcx9/gpio.dts @@ -15,17 +15,14 @@ enum-name = "GPIO_WP_L"; }; gpio_ac_present: ac_present { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_power_button_l: power_button_l { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; diff --git a/zephyr/projects/skyrim/gpio.dts b/zephyr/projects/skyrim/gpio.dts index 8b328b76c4..14441a450c 100644 --- a/zephyr/projects/skyrim/gpio.dts +++ b/zephyr/projects/skyrim/gpio.dts @@ -16,32 +16,26 @@ enum-name = "GPIO_PACKET_MODE_EN"; }; gpio_mech_pwr_btn_odl: mech_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpio6 1 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S3_L"; }; gpio_slp_s5_l: slp_s5_l { - #gpio-cells = <0>; gpios = <&gpio7 2 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S5_L"; }; gpio_pg_pwr_s5: pg_pwr_s5 { - #gpio-cells = <0>; gpios = <&gpioc 0 GPIO_INPUT>; enum-name = "GPIO_S5_PGOOD"; }; gpio_s0_pgood: pg_pcore_s0_r_od { - #gpio-cells = <0>; gpios = <&gpiob 6 GPIO_INPUT>; enum-name = "GPIO_S0_PGOOD"; }; gpio_acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; @@ -77,32 +71,26 @@ gpios = <&gpioe 2 GPIO_INPUT>; }; gpio_usb_c0_tcpc_int_odl: usb_c0_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_TCPC_INT_ODL"; }; gpio_usb_c1_tcpc_int_odl: usb_c1_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioc 7 GPIO_INPUT>; enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; }; gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpio7 5 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PPC_INT_ODL"; }; gpio_usb_c1_ppc_int_odl: usb_c1_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpiod 4 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PPC_INT_ODL"; }; gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpioa 4 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C0_BC12_INT_ODL"; }; gpio_usb_c1_bc12_int_odl: usb_c1_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpio9 6 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C1_BC12_INT_ODL"; }; @@ -123,7 +111,6 @@ enum-name = "GPIO_USB_C1_DP_HPD"; }; gpio_lid_open: lid_open { - #gpio-cells = <0>; gpios = <&gpio0 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; diff --git a/zephyr/projects/skyrim/guybrush.dts b/zephyr/projects/skyrim/guybrush.dts index 7e699e8f9e..d86ad962d1 100644 --- a/zephyr/projects/skyrim/guybrush.dts +++ b/zephyr/projects/skyrim/guybrush.dts @@ -11,27 +11,22 @@ enum-name = "GPIO_WP_L"; }; gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_EC_PWR_BTN_ODL"; }; gpio_slp_s3_s0i3_l: slp_s3_s0i3_l { - #gpio-cells = <0>; gpios = <&gpio7 4 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S0_L"; }; gpio_ec_pcore_int_odl: ec_pcore_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_EC_PCORE_INT_ODL"; }; gpio_pg_groupc_s0_od: pg_groupc_s0_od { - #gpio-cells = <0>; gpios = <&gpioa 3 GPIO_INPUT>; enum-name = "GPIO_PG_GROUPC_S0_OD"; }; gpio_pg_lpddr4x_s3_od: pg_lpddr4x_s3_od { - #gpio-cells = <0>; gpios = <&gpio9 5 GPIO_INPUT>; enum-name = "GPIO_PG_LPDDR4X_S3_OD"; }; @@ -67,12 +62,10 @@ gpios = <&gpioa 2 GPIO_INPUT_PULL_DOWN>; }; gpio_voldn_btn_odl: voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpioa 7 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_volup_btn_odl: volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; diff --git a/zephyr/projects/skyrim/skyrim.dts b/zephyr/projects/skyrim/skyrim.dts index 4dfaa1dd58..34e680d639 100644 --- a/zephyr/projects/skyrim/skyrim.dts +++ b/zephyr/projects/skyrim/skyrim.dts @@ -15,7 +15,6 @@ enum-name = "GPIO_EN_PWR_S3"; }; gpio_pg_groupc_s0_od: pg_groupc_s0_od { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT>; enum-name = "GPIO_PG_GROUPC_S0_OD"; }; @@ -57,7 +56,6 @@ enum-name = "GPIO_USB_HUB_FAULT_ODL"; }; gpio_pg_lpddr5_s3_od: pg_lpddr5_s3_od { - #gpio-cells = <0>; gpios = <&gpio7 3 GPIO_INPUT>; enum-name = "GPIO_PG_LPDDR5_S3_OD"; }; @@ -69,12 +67,10 @@ enum-name = "GPIO_PCH_PWRBTN_L"; }; gpio_volup_btn_odl: volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpio6 7 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_voldn_btn_odl: voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio7 0 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; @@ -91,7 +87,6 @@ enum-name = "GPIO_WP_L"; }; gpio_pg_lpddr5_s0_od: pg_lpddr5_s0_od { - #gpio-cells = <0>; gpios = <&gpio6 0 GPIO_INPUT>; enum-name = "GPIO_PG_LPDDR5_S0_OD"; }; diff --git a/zephyr/projects/trogdor/lazor/gpio.dts b/zephyr/projects/trogdor/lazor/gpio.dts index 9e12c97267..65f0e7a616 100644 --- a/zephyr/projects/trogdor/lazor/gpio.dts +++ b/zephyr/projects/trogdor/lazor/gpio.dts @@ -8,102 +8,82 @@ compatible = "named-gpios"; gpio_usb_c0_pd_int_odl: usb_c0_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PD_INT_ODL"; }; gpio_usb_c1_pd_int_odl: usb_c1_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PD_INT_ODL"; }; gpio_usb_c0_swctl_int_odl: usb_c0_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_INPUT>; enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; }; gpio_usb_c1_swctl_int_odl: usb_c1_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio4 0 GPIO_INPUT>; enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; }; gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C0_BC12_INT_L"; }; gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C1_BC12_INT_L"; }; gpio_usb_a0_oc_odl: usb_a0_oc_odl { - #gpio-cells = <0>; gpios = <&gpiod 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_A0_OC_ODL"; }; gpio_acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_ccd_mode_odl: ccd_mode_odl { - #gpio-cells = <0>; gpios = <&gpioe 3 GPIO_INPUT>; enum-name = "GPIO_CCD_MODE_ODL"; }; gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio7 0 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpiof 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_ec_wp_odl: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_lid_open_ec: lid_open_ec { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_ap_rst_l: ap_rst_l { - #gpio-cells = <0>; gpios = <&gpioc 1 GPIO_INPUT>; enum-name = "GPIO_AP_RST_L"; }; gpio_ps_hold: ps_hold { - #gpio-cells = <0>; gpios = <&gpioa 4 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_PS_HOLD"; }; gpio_ap_suspend: ap_suspend { - #gpio-cells = <0>; gpios = <&gpio5 7 GPIO_INPUT>; enum-name = "GPIO_AP_SUSPEND"; }; gpio_deprecated_ap_rst_req: deprecated_ap_rst_req { - #gpio-cells = <0>; gpios = <&gpioc 2 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_DEPRECATED_AP_RST_REQ"; }; gpio_power_good: power_good { - #gpio-cells = <0>; gpios = <&gpio5 4 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_POWER_GOOD"; }; gpio_warm_reset_l: warm_reset_l { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT>; enum-name = "GPIO_WARM_RESET_L"; }; @@ -111,12 +91,10 @@ gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_accel_gyro_int_l: accel_gyro_int_l { - #gpio-cells = <0>; gpios = <&gpioa 0 GPIO_INPUT>; enum-name = "GPIO_ACCEL_GYRO_INT_L"; }; @@ -125,12 +103,10 @@ enum-name = "GPIO_DA9313_GPIO0"; }; gpio_switchcap_pg_int_l: switchcap_pg_int_l { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_SWITCHCAP_PG_INT_L"; }; gpio_ec_rst_odl: ec_rst_odl { - #gpio-cells = <0>; gpios = <&gpio0 2 GPIO_INPUT>; enum-name = "GPIO_EC_RST_ODL"; }; diff --git a/zephyr/projects/trogdor/trogdor/gpio.dts b/zephyr/projects/trogdor/trogdor/gpio.dts index 16102943a2..036abdb10d 100644 --- a/zephyr/projects/trogdor/trogdor/gpio.dts +++ b/zephyr/projects/trogdor/trogdor/gpio.dts @@ -8,97 +8,78 @@ compatible = "named-gpios"; gpio_usb_c0_pd_int_odl: usb_c0_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PD_INT_ODL"; }; gpio_usb_c1_pd_int_odl: usb_c1_pd_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PD_INT_ODL"; }; gpio_usb_c0_swctl_int_odl: usb_c0_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_INPUT>; enum-name = "GPIO_USB_C0_SWCTL_INT_ODL"; }; gpio_usb_c1_swctl_int_odl: usb_c1_swctl_int_odl { - #gpio-cells = <0>; gpios = <&gpio4 0 GPIO_INPUT>; enum-name = "GPIO_USB_C1_SWCTL_INT_ODL"; }; gpio_usb_c0_bc12_int_l: usb_c0_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio6 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C0_BC12_INT_L"; }; gpio_usb_c1_bc12_int_l: usb_c1_bc12_int_l { - #gpio-cells = <0>; gpios = <&gpio8 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C1_BC12_INT_L"; }; gpio_usb_a0_oc_odl: usb_a0_oc_odl { - #gpio-cells = <0>; gpios = <&gpiod 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_A0_OC_ODL"; }; gpio_chg_acok_od: chg_acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_ec_pwr_btn_odl: ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio7 0 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpiof 2 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; gpio_ec_wp_odl: ec_wp_odl { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_lid_open_ec: lid_open_ec { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_ap_rst_l: ap_rst_l { - #gpio-cells = <0>; gpios = <&gpioc 1 GPIO_INPUT>; enum-name = "GPIO_AP_RST_L"; }; gpio_ps_hold: ps_hold { - #gpio-cells = <0>; gpios = <&gpioa 4 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_PS_HOLD"; }; gpio_ap_suspend: ap_suspend { - #gpio-cells = <0>; gpios = <&gpio5 7 GPIO_INPUT>; enum-name = "GPIO_AP_SUSPEND"; }; gpio_deprecated_ap_rst_req: deprecated_ap_rst_req { - #gpio-cells = <0>; gpios = <&gpioc 2 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_DEPRECATED_AP_RST_REQ"; }; gpio_power_good: power_good { - #gpio-cells = <0>; gpios = <&gpio5 4 GPIO_INPUT_PULL_DOWN>; enum-name = "GPIO_POWER_GOOD"; }; gpio_warm_reset_l: warm_reset_l { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT>; enum-name = "GPIO_WARM_RESET_L"; }; @@ -106,17 +87,14 @@ gpios = <&gpio5 3 GPIO_INPUT_PULL_DOWN>; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpioc 6 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_accel_gyro_int_l: accel_gyro_int_l { - #gpio-cells = <0>; gpios = <&gpioa 0 GPIO_INPUT>; enum-name = "GPIO_ACCEL_GYRO_INT_L"; }; gpio_ec_rst_odl: ec_rst_odl { - #gpio-cells = <0>; gpios = <&gpio0 2 GPIO_INPUT>; enum-name = "GPIO_EC_RST_ODL"; }; diff --git a/zephyr/projects/volteer/delbin/gpio.dts b/zephyr/projects/volteer/delbin/gpio.dts index 0b25cfbfdc..38ce67b243 100644 --- a/zephyr/projects/volteer/delbin/gpio.dts +++ b/zephyr/projects/volteer/delbin/gpio.dts @@ -8,62 +8,50 @@ compatible = "named-gpios"; gpio_ec_lid_open: ec_lid_open { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_ec_wp_l: ec_wp_l { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_WP_L"; }; gpio_h1_ec_pwr_btn_odl: h1_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_slp_s0_l: slp_s0_l { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S0_L"; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpioa 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S3_L"; }; gpio_slp_sus_l: slp_sus_l { - #gpio-cells = <0>; gpios = <&gpiod 7 GPIO_INPUT>; enum-name = "GPIO_SLP_SUS_L"; }; gpio_pg_ec_rsmrst_odl: pg_ec_rsmrst_odl { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_PG_EC_RSMRST_ODL"; }; gpio_dsw_pwrok: dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpioc 7 GPIO_INPUT>; enum-name = "GPIO_PG_EC_DSW_PWROK"; }; gpio_pg_ec_all_sys_pwrgd: pg_ec_all_sys_pwrgd { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT>; enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; }; gpio_ec_imu_int_l: ec_imu_int_l { - #gpio-cells = <0>; gpios = <&gpio5 6 GPIO_INPUT>; enum-name = "GPIO_EC_IMU_INT_L"; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpio9 5 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; @@ -138,7 +126,6 @@ enum-name = "GPIO_CPU_PROCHOT"; }; gpio_ec_prochot_in_l: ec_prochot_in_l { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT>; enum-name = "GPIO_EC_PROCHOT_IN_L"; }; diff --git a/zephyr/projects/volteer/volteer/cbi_eeprom.dts b/zephyr/projects/volteer/volteer/cbi_eeprom.dts index 65248a5f48..9c7fefed19 100644 --- a/zephyr/projects/volteer/volteer/cbi_eeprom.dts +++ b/zephyr/projects/volteer/volteer/cbi_eeprom.dts @@ -12,7 +12,7 @@ pagesize = <16>; address-width = <8>; timeout = <5>; - wp-gpios = <&gpio_ec_wp_l>; + /* wp-gpios = <&gpio_ec_wp_l>; */ }; }; diff --git a/zephyr/projects/volteer/volteer/gpio.dts b/zephyr/projects/volteer/volteer/gpio.dts index 3ba9f8066b..7e9561fdc1 100644 --- a/zephyr/projects/volteer/volteer/gpio.dts +++ b/zephyr/projects/volteer/volteer/gpio.dts @@ -8,12 +8,10 @@ compatible = "named-gpios"; gpio_ec_lid_open: ec_lid_open { - #gpio-cells = <0>; gpios = <&gpiod 2 GPIO_INPUT>; enum-name = "GPIO_LID_OPEN"; }; gpio_ec_wp_l: ec_wp_l { - #gpio-cells = <0>; gpios = <&gpioa 1 GPIO_INPUT>; enum-name = "GPIO_EC_WP_L"; }; @@ -22,104 +20,82 @@ enum-name = "GPIO_WP_L"; }; gpio_h1_ec_pwr_btn_odl: h1_ec_pwr_btn_odl { - #gpio-cells = <0>; gpios = <&gpio0 1 GPIO_INPUT>; enum-name = "GPIO_POWER_BUTTON_L"; }; gpio_acok_od: acok_od { - #gpio-cells = <0>; gpios = <&gpio0 0 GPIO_INPUT>; enum-name = "GPIO_AC_PRESENT"; }; gpio_slp_s0_l: slp_s0_l { - #gpio-cells = <0>; gpios = <&gpiod 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S0_L"; }; gpio_slp_s3_l: slp_s3_l { - #gpio-cells = <0>; gpios = <&gpioa 5 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_S3_L"; }; gpio_pch_slp_sus_l: pch_slp_sus_l { - #gpio-cells = <0>; gpios = <&gpiod 7 GPIO_INPUT>; enum-name = "GPIO_PCH_SLP_SUS_L"; }; gpio_slp_sus_l: slp_sus_l { - #gpio-cells = <0>; gpios = <&gpiod 7 GPIO_INPUT>; enum-name = "GPIO_SLP_SUS_L"; }; gpio_pg_ec_rsmrst_odl: pg_ec_rsmrst_odl { - #gpio-cells = <0>; gpios = <&gpioe 2 GPIO_INPUT>; enum-name = "GPIO_PG_EC_RSMRST_ODL"; }; gpio_pg_ec_dsw_pwrok: pg_ec_dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpioc 7 GPIO_INPUT>; enum-name = "GPIO_PG_EC_DSW_PWROK"; }; gpio_pg_ec_all_sys_pwrgd: pg_ec_all_sys_pwrgd { - #gpio-cells = <0>; gpios = <&gpiof 4 GPIO_INPUT>; enum-name = "GPIO_PG_EC_ALL_SYS_PWRGD"; }; gpio_ec_imu_int_l: ec_imu_int_l { - #gpio-cells = <0>; gpios = <&gpio5 6 GPIO_INPUT>; enum-name = "GPIO_EC_IMU_INT_L"; }; gpio_ec_als_rgb_int_l: ec_als_rgb_int_l { - #gpio-cells = <0>; gpios = <&gpiod 4 GPIO_INPUT>; enum-name = "GPIO_EC_ALS_RGB_INT_L"; }; gpio_tablet_mode_l: tablet_mode_l { - #gpio-cells = <0>; gpios = <&gpio9 5 GPIO_INPUT>; enum-name = "GPIO_TABLET_MODE_L"; }; gpio_ec_accel_int: ec_accel_int { - #gpio-cells = <0>; gpios = <&gpio8 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_EC_ACCEL_INT"; }; gpio_usb_c0_tcpc_int_odl: usb_c0_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 0 GPIO_INPUT>; enum-name = "GPIO_USB_C0_TCPC_INT_ODL"; }; gpio_usb_c1_tcpc_int_odl: usb_c1_tcpc_int_odl { - #gpio-cells = <0>; gpios = <&gpioa 2 GPIO_INPUT>; enum-name = "GPIO_USB_C1_TCPC_INT_ODL"; }; gpio_usb_c0_ppc_int_odl: usb_c0_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpio6 2 GPIO_INPUT>; enum-name = "GPIO_USB_C0_PPC_INT_ODL"; }; gpio_usb_c1_ppc_int_odl: usb_c1_ppc_int_odl { - #gpio-cells = <0>; gpios = <&gpiof 5 GPIO_INPUT>; enum-name = "GPIO_USB_C1_PPC_INT_ODL"; }; gpio_usb_c0_bc12_int_odl: usb_c0_bc12_int_odl { - #gpio-cells = <0>; gpios = <&gpioe 4 GPIO_INPUT>; enum-name = "GPIO_USB_C0_BC12_INT_ODL"; }; gpio_usb_c1_mix_int_odl: usb_c1_mix_int_odl { - #gpio-cells = <0>; - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_INPUT>; enum-name = "GPIO_USB_C1_MIX_INT_ODL"; }; gpio_usb_c1_bc12_int_odl: usb_c1_bc12_int_odl { - #gpio-cells = <0>; - #gpio-cells = <0>; gpios = <&gpio0 3 GPIO_INPUT>; enum-name = "GPIO_USB_C1_BC12_INT_ODL"; }; @@ -128,12 +104,10 @@ enum-name = "GPIO_USB_C1_FRS_EN"; }; gpio_ec_voldn_btn_odl: ec_voldn_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 3 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_DOWN_L"; }; gpio_ec_volup_btn_odl: ec_volup_btn_odl { - #gpio-cells = <0>; gpios = <&gpio9 7 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_VOLUME_UP_L"; }; @@ -154,7 +128,6 @@ enum-name = "GPIO_EN_PPVAR_VCCIN"; }; gpio_ec_pch_dsw_pwrok: ec_pch_dsw_pwrok { - #gpio-cells = <0>; gpios = <&gpioc 0 GPIO_OUT_LOW>; enum-name = "GPIO_PCH_DSW_PWROK"; }; @@ -190,7 +163,6 @@ enum-name = "GPIO_CPU_PROCHOT"; }; gpio_ec_prochot_in_l: ec_prochot_in_l { - #gpio-cells = <0>; gpios = <&gpiof 0 GPIO_INPUT>; enum-name = "GPIO_EC_PROCHOT_IN_L"; }; @@ -211,11 +183,9 @@ enum-name = "GPIO_USB_A_LOW_PWR_OD"; }; gpio_usb_c1_rt_rst_odl_boardid_0: usb_c1_rt_rst_odl_boardid_0 { - #gpio-cells = <0>; gpios = <&gpio3 2 GPIO_ODR_LOW>; }; gpio_usb_c1_rt_rst_odl: usb_c1_rt_rst_odl { - #gpio-cells = <0>; gpios = <&gpio8 3 GPIO_ODR_LOW>; enum-name = "GPIO_USB_C1_RT_RST_ODL"; }; @@ -248,7 +218,6 @@ gpios = <&gpio7 2 GPIO_INPUT_PULL_UP>; }; gpio_unused_gpio41: unused_gpio41 { - #gpio-cells = <0>; gpios = <&gpio4 1 GPIO_INPUT_PULL_UP>; enum-name = "GPIO_USB_C1_LS_EN"; }; diff --git a/zephyr/test/drivers/overlay.dts b/zephyr/test/drivers/overlay.dts index 0bb8901381..e47de44ded 100644 --- a/zephyr/test/drivers/overlay.dts +++ b/zephyr/test/drivers/overlay.dts @@ -35,7 +35,6 @@ * protection. */ gpio_wp_l: wp_l { - #gpio-cells = <0>; gpios = <&gpio0 3 (GPIO_INPUT | GPIO_OUTPUT)>; enum-name = "GPIO_WP_L"; }; @@ -674,7 +673,6 @@ pagesize = <8>; address-width = <8>; timeout = <5>; - wp-gpios = <&gpio_wp_l>; }; battery: sb@b { |