summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--baseboard/intelrvp/baseboard.c1
-rw-r--r--baseboard/intelrvp/baseboard.h6
-rw-r--r--baseboard/intelrvp/build.mk9
-rw-r--r--baseboard/intelrvp/ite_ec.c23
-rw-r--r--baseboard/intelrvp/ite_ec.h4
-rw-r--r--baseboard/intelrvp/led.c3
-rw-r--r--baseboard/intelrvp/retimer.c28
-rw-r--r--baseboard/intelrvp/usb_mux.c80
-rw-r--r--board/jslrvp_ite/board.c35
-rw-r--r--board/jslrvp_ite/board.h11
-rw-r--r--board/tglrvpu_ite/board.c69
-rw-r--r--board/tglrvpu_ite/board.h11
12 files changed, 129 insertions, 151 deletions
diff --git a/baseboard/intelrvp/baseboard.c b/baseboard/intelrvp/baseboard.c
index bf1127bb76..6bf955b100 100644
--- a/baseboard/intelrvp/baseboard.c
+++ b/baseboard/intelrvp/baseboard.c
@@ -190,4 +190,3 @@ __override void intel_x86_sys_reset_delay(void)
*/
udelay(60 * MSEC);
}
-
diff --git a/baseboard/intelrvp/baseboard.h b/baseboard/intelrvp/baseboard.h
index e3db7ffa75..7f60793f77 100644
--- a/baseboard/intelrvp/baseboard.h
+++ b/baseboard/intelrvp/baseboard.h
@@ -8,9 +8,9 @@
#ifndef __CROS_EC_BASEBOARD_H
#define __CROS_EC_BASEBOARD_H
-#ifdef CHIP_FAMILY_IT83XX
+#ifdef VARIANT_INTELRVP_EC_IT8320
#include "ite_ec.h"
-#endif /* CHIP_FAMILY_IT83XX */
+#endif /* VARIANT_INTELRVP_EC_IT8320 */
/*
* Allow dangerous commands.
@@ -44,7 +44,6 @@
/* Battery */
#define CONFIG_BATTERY_CUT_OFF
#define CONFIG_BATTERY_FUEL_GAUGE
-#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L
#define CONFIG_BATTERY_REVIVE_DISCONNECT
#define CONFIG_BATTERY_SMART
@@ -128,7 +127,6 @@
/* Tablet mode */
#define CONFIG_TABLET_MODE
#define CONFIG_GMR_TABLET_MODE
-#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
/* Verified boot */
#define CONFIG_CRC8
diff --git a/baseboard/intelrvp/build.mk b/baseboard/intelrvp/build.mk
index d48d862fd5..896673c4a4 100644
--- a/baseboard/intelrvp/build.mk
+++ b/baseboard/intelrvp/build.mk
@@ -13,14 +13,7 @@ baseboard-$(CONFIG_BATTERY_SMART)+=battery.o
baseboard-$(CONFIG_USB_POWER_DELIVERY)+=chg_usb_pd.o usb_pd_policy.o
#EC specific files
-baseboard-$(CONFIG_USB_PD_TCPM_ITE_ON_CHIP)+=ite_ec.o
+baseboard-$(VARIANT_INTELRVP_EC_IT8320)+=ite_ec.o
#BC1.2 specific files
baseboard-$(CONFIG_BC12_DETECT_MAX14637)+=bc12.o
-
-#USB MUX specific files
-baseboard-$(CONFIG_USB_MUX_VIRTUAL)+=usb_mux.o
-baseboard-$(CONFIG_USB_MUX_ANX7440)+=usb_mux.o
-
-#USB Retimer specific files
-baseboard-$(CONFIG_USBC_RETIMER_INTEL_BB)+=retimer.o
diff --git a/baseboard/intelrvp/ite_ec.c b/baseboard/intelrvp/ite_ec.c
index 2a847e5132..a575aab417 100644
--- a/baseboard/intelrvp/ite_ec.c
+++ b/baseboard/intelrvp/ite_ec.c
@@ -13,29 +13,6 @@
#include "timer.h"
#include "usb_pd_tcpm.h"
-/* USB-C TPCP Configuration */
-const struct tcpc_config_t tcpc_config[] = {
- [TYPE_C_PORT_0] = {
- .bus_type = EC_BUS_TYPE_EMBEDDED,
- /* TCPC is embedded within EC so no i2c config needed */
- .drv = &it83xx_tcpm_drv,
-#ifdef CONFIG_INTEL_VIRTUAL_MUX
- .usb23 = TYPE_C_PORT_0_USB2_NUM | (TYPE_C_PORT_0_USB3_NUM << 4),
-#endif
- },
-#ifdef HAS_TASK_PD_C1
- [TYPE_C_PORT_1] = {
- .bus_type = EC_BUS_TYPE_EMBEDDED,
- /* TCPC is embedded within EC so no i2c config needed */
- .drv = &it83xx_tcpm_drv,
-#ifdef CONFIG_INTEL_VIRTUAL_MUX
- .usb23 = TYPE_C_PORT_1_USB2_NUM | (TYPE_C_PORT_1_USB3_NUM << 4),
-#endif
- },
-#endif /* HAS_TASK_PD_C1 */
-};
-BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == CONFIG_USB_PD_PORT_MAX_COUNT);
-
/* Reset PD MCU */
void board_reset_pd_mcu(void)
{
diff --git a/baseboard/intelrvp/ite_ec.h b/baseboard/intelrvp/ite_ec.h
index a09923dbb0..2857f8efdf 100644
--- a/baseboard/intelrvp/ite_ec.h
+++ b/baseboard/intelrvp/ite_ec.h
@@ -8,10 +8,6 @@
#ifndef __CROS_EC_ITE_EC_H
#define __CROS_EC_ITE_EC_H
-/* USB PD config */
-#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP
-#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2
-
/* Optional feature - used by ITE */
#define CONFIG_IT83XX_FLASH_CLOCK_48MHZ
diff --git a/baseboard/intelrvp/led.c b/baseboard/intelrvp/led.c
index 8e98f8e10f..47dad8994f 100644
--- a/baseboard/intelrvp/led.c
+++ b/baseboard/intelrvp/led.c
@@ -14,9 +14,6 @@
#define LED_ON_LVL 0
#define LED_OFF_LVL 1
-#define GPIO_BAT_LED_RED_L GPIO_BAT_LED_GREEN_L
-#define GPIO_PWR_LED_WHITE_L GPIO_AC_LED_GREEN_L
-
const int led_charge_lvl_1 = 5;
const int led_charge_lvl_2 = 97;
diff --git a/baseboard/intelrvp/retimer.c b/baseboard/intelrvp/retimer.c
deleted file mode 100644
index c64ad64bcb..0000000000
--- a/baseboard/intelrvp/retimer.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Intel BASEBOARD-RVP Retimer specific configuration */
-
-#include "bb_retimer.h"
-#include "compile_time_macros.h"
-#include "common.h"
-
-/* USB Retimers configuration */
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
-const struct bb_usb_control bb_controls[] = {
- [TYPE_C_PORT_0] = {
- .usb_ls_en_gpio = GPIO_USB_C0_LS_EN,
- .retimer_rst_gpio = GPIO_USB_C0_RETIMER_RST,
- },
-#ifdef HAS_TASK_PD_C1
- [TYPE_C_PORT_1] = {
- .usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
- .retimer_rst_gpio = GPIO_USB_C1_RETIMER_RST,
- },
-#endif /* HAS_TASK_PD_C1 */
-};
-BUILD_ASSERT(ARRAY_SIZE(bb_controls) == CONFIG_USB_PD_PORT_MAX_COUNT);
-
-#endif /* CONFIG_USBC_RETIMER_INTEL_BB */
diff --git a/baseboard/intelrvp/usb_mux.c b/baseboard/intelrvp/usb_mux.c
deleted file mode 100644
index 644ae1735c..0000000000
--- a/baseboard/intelrvp/usb_mux.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Intel BASEBOARD-RVP USB MUX specific configuration */
-
-#include "common.h"
-#include "anx7440.h"
-#include "bb_retimer.h"
-#include "timer.h"
-#include "usb_mux.h"
-
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
-struct usb_mux usbc0_retimer = {
- .usb_port = TYPE_C_PORT_0,
- .driver = &bb_usb_retimer,
- .i2c_port = I2C_PORT0_BB_RETIMER,
- .i2c_addr_flags = I2C_PORT0_BB_RETIMER_ADDR,
-};
-#ifdef HAS_TASK_PD_C1
-struct usb_mux usbc1_retimer = {
- .usb_port = TYPE_C_PORT_1,
- .driver = &bb_usb_retimer,
- .i2c_port = I2C_PORT1_BB_RETIMER,
- .i2c_addr_flags = I2C_PORT1_BB_RETIMER_ADDR,
-};
-#endif /* HAS_TASK_PD_C1 */
-#endif
-
-/* USB muxes Configuration */
-#ifdef CONFIG_USB_MUX_VIRTUAL
-const struct usb_mux usb_muxes[] = {
- [TYPE_C_PORT_0] = {
- .usb_port = TYPE_C_PORT_0,
- .driver = &virtual_usb_mux_driver,
- .hpd_update = &virtual_hpd_update,
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
- .next_mux = &usbc0_retimer,
-#endif
- },
-#ifdef HAS_TASK_PD_C1
- [TYPE_C_PORT_1] = {
- .usb_port = TYPE_C_PORT_1,
- .driver = &virtual_usb_mux_driver,
- .hpd_update = &virtual_hpd_update,
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
- .next_mux = &usbc1_retimer,
-#endif
- },
-#endif /* HAS_TASK_PD_C1 */
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT);
-#endif /* CONFIG_USB_MUX_VIRTUAL */
-
-#ifdef CONFIG_USB_MUX_ANX7440
-const struct usb_mux usb_muxes[] = {
- [TYPE_C_PORT_0] = {
- .usb_port = TYPE_C_PORT_0,
- .i2c_port = I2C_PORT_USB_MUX,
- .i2c_addr_flags = I2C_ADDR_USB_MUX0_FLAGS,
- .driver = &anx7440_usb_mux_driver,
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
- .next_mux = &usbc0_retimer,
-#endif
- },
-#ifdef HAS_TASK_PD_C1
- [TYPE_C_PORT_1] = {
- .usb_port = TYPE_C_PORT_1,
- .i2c_port = I2C_PORT_USB_MUX,
- .i2c_addr_flags = I2C_ADDR_USB_MUX1_FLAGS,
- .driver = &anx7440_usb_mux_driver,
-#ifdef CONFIG_USBC_RETIMER_INTEL_BB
- .next_mux = &usbc1_retimer,
-#endif
- },
-#endif /* HAS_TASK_PD_C1 */
-};
-BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT);
-#endif /* CONFIG_USB_MUX_ANX7440 */
diff --git a/board/jslrvp_ite/board.c b/board/jslrvp_ite/board.c
index 6a8cc3972b..c84b2cf38c 100644
--- a/board/jslrvp_ite/board.c
+++ b/board/jslrvp_ite/board.c
@@ -5,6 +5,7 @@
/* Intel Jasperlake RVP with ITE EC board specific configuration */
+#include "anx7440.h"
#include "button.h"
#include "charger.h"
#include "driver/charger/isl923x.h"
@@ -12,6 +13,7 @@
#include "i2c.h"
#include "icelake.h"
#include "intc.h"
+#include "it83xx_pd.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
@@ -19,6 +21,8 @@
#include "system.h"
#include "tablet_mode.h"
#include "uart.h"
+#include "usb_mux.h"
+#include "usb_pd_tcpm.h"
#include "gpio_list.h"
@@ -58,6 +62,37 @@ const struct tcpc_gpio_config_t tcpc_gpios[] = {
};
BUILD_ASSERT(ARRAY_SIZE(tcpc_gpios) == CONFIG_USB_PD_PORT_MAX_COUNT);
+/* USB-C TPCP Configuration */
+const struct tcpc_config_t tcpc_config[] = {
+ [TYPE_C_PORT_0] = {
+ .bus_type = EC_BUS_TYPE_EMBEDDED,
+ /* TCPC is embedded within EC so no i2c config needed */
+ .drv = &it83xx_tcpm_drv,
+ },
+ [TYPE_C_PORT_1] = {
+ .bus_type = EC_BUS_TYPE_EMBEDDED,
+ /* TCPC is embedded within EC so no i2c config needed */
+ .drv = &it83xx_tcpm_drv,
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == CONFIG_USB_PD_PORT_MAX_COUNT);
+
+const struct usb_mux usb_muxes[] = {
+ [TYPE_C_PORT_0] = {
+ .usb_port = TYPE_C_PORT_0,
+ .i2c_port = I2C_PORT_USB_MUX,
+ .i2c_addr_flags = I2C_ADDR_USB_MUX0_FLAGS,
+ .driver = &anx7440_usb_mux_driver,
+ },
+ [TYPE_C_PORT_1] = {
+ .usb_port = TYPE_C_PORT_1,
+ .i2c_port = I2C_PORT_USB_MUX,
+ .i2c_addr_flags = I2C_ADDR_USB_MUX1_FLAGS,
+ .driver = &anx7440_usb_mux_driver,
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT);
+
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
/* Flash EC */
diff --git a/board/jslrvp_ite/board.h b/board/jslrvp_ite/board.h
index 2ac8afa8d9..4f88cd5a52 100644
--- a/board/jslrvp_ite/board.h
+++ b/board/jslrvp_ite/board.h
@@ -8,10 +8,17 @@
#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H
+/* ITE EC variant */
+#define VARIANT_INTELRVP_EC_IT8320
+
#define CONFIG_CHIPSET_JASPERLAKE
#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD
#define GPIO_PCH_DSW_PWROK GPIO_EC_PCH_DSW_PWROK
#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_ALL_SYS_PWRGD
+#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L
+#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
+#define GPIO_BAT_LED_RED_L GPIO_BAT_LED_GREEN_L
+#define GPIO_PWR_LED_WHITE_L GPIO_AC_LED_GREEN_L
/* Fan features */
#define CONFIG_FANS 1
@@ -34,6 +41,10 @@
#define CONFIG_USB_PD_PORT_MAX_COUNT 2
#define DEDICATED_CHARGE_PORT 2
+/* USB PD config */
+#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP
+#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2
+
/* USB MUX */
#define CONFIG_USB_MUX_ANX7440
diff --git a/board/tglrvpu_ite/board.c b/board/tglrvpu_ite/board.c
index 5698761c6a..a629059612 100644
--- a/board/tglrvpu_ite/board.c
+++ b/board/tglrvpu_ite/board.c
@@ -13,6 +13,7 @@
#include "i2c.h"
#include "icelake.h"
#include "intc.h"
+#include "it83xx_pd.h"
#include "lid_switch.h"
#include "power.h"
#include "power_button.h"
@@ -20,6 +21,8 @@
#include "system.h"
#include "tablet_mode.h"
#include "uart.h"
+#include "usb_mux.h"
+#include "usb_pd_tcpm.h"
#include "gpio_list.h"
@@ -80,6 +83,72 @@ const struct tcpc_gpio_config_t tcpc_gpios[] = {
};
BUILD_ASSERT(ARRAY_SIZE(tcpc_gpios) == CONFIG_USB_PD_PORT_MAX_COUNT);
+/* USB-C TPCP Configuration */
+const struct tcpc_config_t tcpc_config[] = {
+ [TYPE_C_PORT_0] = {
+ .bus_type = EC_BUS_TYPE_EMBEDDED,
+ /* TCPC is embedded within EC so no i2c config needed */
+ .drv = &it83xx_tcpm_drv,
+#ifdef CONFIG_INTEL_VIRTUAL_MUX
+ .usb23 = TYPE_C_PORT_0_USB2_NUM | (TYPE_C_PORT_0_USB3_NUM << 4),
+#endif
+ },
+ [TYPE_C_PORT_1] = {
+ .bus_type = EC_BUS_TYPE_EMBEDDED,
+ /* TCPC is embedded within EC so no i2c config needed */
+ .drv = &it83xx_tcpm_drv,
+#ifdef CONFIG_INTEL_VIRTUAL_MUX
+ .usb23 = TYPE_C_PORT_1_USB2_NUM | (TYPE_C_PORT_1_USB3_NUM << 4),
+#endif
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == CONFIG_USB_PD_PORT_MAX_COUNT);
+
+/* BB Retimers configuration */
+const struct bb_usb_control bb_controls[] = {
+ [TYPE_C_PORT_0] = {
+ .usb_ls_en_gpio = GPIO_USB_C0_LS_EN,
+ .retimer_rst_gpio = GPIO_USB_C0_RETIMER_RST,
+ },
+ [TYPE_C_PORT_1] = {
+ .usb_ls_en_gpio = GPIO_USB_C1_LS_EN,
+ .retimer_rst_gpio = GPIO_USB_C1_RETIMER_RST,
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(bb_controls) == CONFIG_USB_PD_PORT_MAX_COUNT);
+
+/* USB retimer Configuration */
+struct usb_mux usbc0_retimer = {
+ .usb_port = TYPE_C_PORT_0,
+ .driver = &bb_usb_retimer,
+ .i2c_port = I2C_PORT0_BB_RETIMER,
+ .i2c_addr_flags = I2C_PORT0_BB_RETIMER_ADDR,
+};
+
+struct usb_mux usbc1_retimer = {
+ .usb_port = TYPE_C_PORT_1,
+ .driver = &bb_usb_retimer,
+ .i2c_port = I2C_PORT1_BB_RETIMER,
+ .i2c_addr_flags = I2C_PORT1_BB_RETIMER_ADDR,
+};
+
+/* USB muxes Configuration */
+const struct usb_mux usb_muxes[] = {
+ [TYPE_C_PORT_0] = {
+ .usb_port = TYPE_C_PORT_0,
+ .driver = &virtual_usb_mux_driver,
+ .hpd_update = &virtual_hpd_update,
+ .next_mux = &usbc0_retimer,
+ },
+ [TYPE_C_PORT_1] = {
+ .usb_port = TYPE_C_PORT_1,
+ .driver = &virtual_usb_mux_driver,
+ .hpd_update = &virtual_hpd_update,
+ .next_mux = &usbc1_retimer,
+ },
+};
+BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == CONFIG_USB_PD_PORT_MAX_COUNT);
+
/* I2C ports */
const struct i2c_port_t i2c_ports[] = {
/* Flash EC */
diff --git a/board/tglrvpu_ite/board.h b/board/tglrvpu_ite/board.h
index 222295c7cd..0a0bd6e14f 100644
--- a/board/tglrvpu_ite/board.h
+++ b/board/tglrvpu_ite/board.h
@@ -8,6 +8,9 @@
#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H
+/* ITE EC variant */
+#define VARIANT_INTELRVP_EC_IT8320
+
/* USB MUX */
#define CONFIG_USB_MUX_VIRTUAL
@@ -31,6 +34,10 @@
#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD
#define GPIO_PCH_DSW_PWROK GPIO_EC_PCH_DSW_PWROK
#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_ALL_SYS_PWRGD
+#define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L
+#define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L
+#define GPIO_BAT_LED_RED_L GPIO_BAT_LED_GREEN_L
+#define GPIO_PWR_LED_WHITE_L GPIO_AC_LED_GREEN_L
/* Charger */
#define CONFIG_CHARGER_ISL9241
@@ -43,6 +50,10 @@
#define CONFIG_USB_PD_PORT_MAX_COUNT 2
#define DEDICATED_CHARGE_PORT 2
+/* USB PD config */
+#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP
+#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2
+
/* USB-C port's USB2 & USB3 port numbers */
#if defined(BOARD_TGLRVPU_ITE) || defined(BOARD_TGLRVPU_ITE_TCPMV1)
#define TYPE_C_PORT_0_USB2_NUM 6