summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/drawcia/board.c12
-rw-r--r--board/drawcia/board.h5
-rw-r--r--board/drawcia/gpio.inc1
-rw-r--r--board/madoo/board.c12
-rw-r--r--board/madoo/board.h3
-rw-r--r--board/madoo/gpio.inc1
-rw-r--r--board/magolor/board.c12
-rw-r--r--board/magolor/board.h3
-rw-r--r--board/magolor/gpio.inc1
-rw-r--r--board/waddledee/board.c12
-rw-r--r--board/waddledee/board.h5
-rw-r--r--board/waddledee/gpio.inc1
-rw-r--r--board/waddledoo/board.c12
-rw-r--r--board/waddledoo/board.h3
-rw-r--r--board/waddledoo/gpio.inc1
15 files changed, 0 insertions, 84 deletions
diff --git a/board/drawcia/board.c b/board/drawcia/board.c
index 1b872683fa..9abd33f4f9 100644
--- a/board/drawcia/board.c
+++ b/board/drawcia/board.c
@@ -16,7 +16,6 @@
#include "driver/accelgyro_lsm6dsm.h"
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/sm5803.h"
-#include "driver/sync.h"
#include "driver/temp_sensor/thermistor.h"
#include "driver/tcpm/it83xx_pd.h"
#include "driver/tcpm/ps8xxx.h"
@@ -351,17 +350,6 @@ struct motion_sensor_t motion_sensors[] = {
.min_frequency = LSM6DSM_ODR_MIN_VAL,
.max_frequency = LSM6DSM_ODR_MAX_VAL,
},
- [VSYNC] = {
- .name = "Camera VSYNC",
- .active_mask = SENSOR_ACTIVE_S0,
- .chip = MOTIONSENSE_CHIP_GPIO,
- .type = MOTIONSENSE_TYPE_SYNC,
- .location = MOTIONSENSE_LOC_CAMERA,
- .drv = &sync_drv,
- .default_range = 0,
- .min_frequency = 0,
- .max_frequency = 1,
- },
};
unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/drawcia/board.h b/board/drawcia/board.h
index 3fe1e7fda4..8ebb78eafe 100644
--- a/board/drawcia/board.h
+++ b/board/drawcia/board.h
@@ -39,7 +39,6 @@
/* Sensors */
#define CONFIG_ACCEL_BMA255 /* Lid accel */
#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */
-#define CONFIG_SYNC /* Camera VSYNC */
/* Sensors without hardware FIFO are in forced mode */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
@@ -60,9 +59,6 @@
#define CONFIG_ACCEL_LSM6DSM_INT_EVENT \
TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_SYNC_INT_EVENT \
- TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
-
#define CONFIG_TABLET_MODE
#define CONFIG_TABLET_MODE_SWITCH
#define CONFIG_GMR_TABLET_MODE
@@ -113,7 +109,6 @@ enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
- VSYNC,
SENSOR_COUNT
};
diff --git a/board/drawcia/gpio.inc b/board/drawcia/gpio.inc
index 92c8bf7058..80b21fa15b 100644
--- a/board/drawcia/gpio.inc
+++ b/board/drawcia/gpio.inc
@@ -39,7 +39,6 @@ GPIO_INT(LID_360_L, PIN(A, 7), GPIO_INT_BOTH, gmr_tablet_switch_isr)
GPIO_INT(VOLDN_BTN_ODL, PIN(I, 6), GPIO_INT_BOTH, button_interrupt)
GPIO_INT(VOLUP_BTN_ODL_HDMI_HPD, PIN(I, 7), GPIO_INT_BOTH, button_sub_hdmi_hpd_interrupt)
GPIO_INT(BASE_SIXAXIS_INT_L, PIN(J, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt)
-GPIO_INT(CAM_EC_VSYNC, PIN(C, 7), GPIO_INT_RISING, sync_interrupt)
GPIO_INT(EC_WP_OD, PIN(A, 6), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(PEN_DET_ODL, PIN(J, 1), GPIO_INT_BOTH | GPIO_PULL_UP, pen_detect_interrupt)
diff --git a/board/madoo/board.c b/board/madoo/board.c
index fe83a89d96..8e7cdea963 100644
--- a/board/madoo/board.c
+++ b/board/madoo/board.c
@@ -20,7 +20,6 @@
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/isl923x.h"
#include "driver/retimer/nb7v904m.h"
-#include "driver/sync.h"
#include "driver/tcpm/raa489000.h"
#include "driver/tcpm/tcpci.h"
#include "driver/usb_mux/pi3usb3x532.h"
@@ -389,17 +388,6 @@ struct motion_sensor_t motion_sensors[] = {
.min_frequency = LSM6DSM_ODR_MIN_VAL,
.max_frequency = LSM6DSM_ODR_MAX_VAL,
},
- [VSYNC] = {
- .name = "Camera VSYNC",
- .active_mask = SENSOR_ACTIVE_S0,
- .chip = MOTIONSENSE_CHIP_GPIO,
- .type = MOTIONSENSE_TYPE_SYNC,
- .location = MOTIONSENSE_LOC_CAMERA,
- .drv = &sync_drv,
- .default_range = 0,
- .min_frequency = 0,
- .max_frequency = 1,
- },
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/madoo/board.h b/board/madoo/board.h
index 8396518106..522d99b322 100644
--- a/board/madoo/board.h
+++ b/board/madoo/board.h
@@ -81,7 +81,6 @@
#define CONFIG_ACCEL_BMA255 /* Lid accel */
#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */
-#define CONFIG_SYNC /* Camera VSYNC */
/* Lid operates in forced mode, base in FIFO */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
@@ -90,7 +89,6 @@
#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3)
#define CONFIG_ACCEL_INTERRUPTS
-#define CONFIG_SYNC_INT_EVENT TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
#define CONFIG_LID_ANGLE
#define CONFIG_LID_ANGLE_UPDATE
@@ -133,7 +131,6 @@ enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
- VSYNC,
SENSOR_COUNT
};
diff --git a/board/madoo/gpio.inc b/board/madoo/gpio.inc
index 8fdf49f0ac..53dece4e13 100644
--- a/board/madoo/gpio.inc
+++ b/board/madoo/gpio.inc
@@ -38,7 +38,6 @@ GPIO_INT(VOLUP_BTN_ODL, PIN(7, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interr
GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)
GPIO_INT(EC_WP_OD, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt)
-GPIO_INT(CAM_EC_VSYNC, PIN(0, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, sync_interrupt)
GPIO_INT(LID_360_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
/* I2C Ports */
diff --git a/board/magolor/board.c b/board/magolor/board.c
index c8c6fab77f..4335141881 100644
--- a/board/magolor/board.c
+++ b/board/magolor/board.c
@@ -20,7 +20,6 @@
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/isl923x.h"
#include "driver/retimer/nb7v904m.h"
-#include "driver/sync.h"
#include "driver/tcpm/raa489000.h"
#include "driver/tcpm/tcpci.h"
#include "driver/usb_mux/pi3usb3x532.h"
@@ -383,17 +382,6 @@ struct motion_sensor_t motion_sensors[] = {
.min_frequency = BMI_GYRO_MIN_FREQ,
.max_frequency = BMI_GYRO_MAX_FREQ,
},
- [VSYNC] = {
- .name = "Camera VSYNC",
- .active_mask = SENSOR_ACTIVE_S0,
- .chip = MOTIONSENSE_CHIP_GPIO,
- .type = MOTIONSENSE_TYPE_SYNC,
- .location = MOTIONSENSE_LOC_CAMERA,
- .drv = &sync_drv,
- .default_range = 0,
- .min_frequency = 0,
- .max_frequency = 1,
- },
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/magolor/board.h b/board/magolor/board.h
index a1d32f1bd4..06b15529ce 100644
--- a/board/magolor/board.h
+++ b/board/magolor/board.h
@@ -99,7 +99,6 @@
#define CONFIG_ACCEL_BMA255 /* Lid accel */
#define CONFIG_ACCELGYRO_BMI160 /* Base accel */
-#define CONFIG_SYNC /* Camera VSYNC */
/* Lid operates in forced mode, base in FIFO */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
@@ -110,7 +109,6 @@
#define CONFIG_ACCEL_INTERRUPTS
#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_SYNC_INT_EVENT TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
#define CONFIG_LID_ANGLE
#define CONFIG_LID_ANGLE_UPDATE
@@ -153,7 +151,6 @@ enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
- VSYNC,
SENSOR_COUNT
};
diff --git a/board/magolor/gpio.inc b/board/magolor/gpio.inc
index f7b44dc335..42593db13b 100644
--- a/board/magolor/gpio.inc
+++ b/board/magolor/gpio.inc
@@ -37,7 +37,6 @@ GPIO_INT(VOLUP_BTN_ODL, PIN(7, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interr
GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)
GPIO_INT(EC_WP_OD, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt)
-GPIO_INT(CAM_EC_VSYNC, PIN(0, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, sync_interrupt)
GPIO_INT(LID_360_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
/* I2C Ports */
diff --git a/board/waddledee/board.c b/board/waddledee/board.c
index 9a4b8432cc..213a93295b 100644
--- a/board/waddledee/board.c
+++ b/board/waddledee/board.c
@@ -14,7 +14,6 @@
#include "driver/accelgyro_lsm6dsm.h"
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/sm5803.h"
-#include "driver/sync.h"
#include "driver/retimer/tusb544.h"
#include "driver/temp_sensor/thermistor.h"
#include "driver/tcpm/anx7447.h"
@@ -543,17 +542,6 @@ struct motion_sensor_t motion_sensors[] = {
.min_frequency = LSM6DSM_ODR_MIN_VAL,
.max_frequency = LSM6DSM_ODR_MAX_VAL,
},
- [VSYNC] = {
- .name = "Camera VSYNC",
- .active_mask = SENSOR_ACTIVE_S0,
- .chip = MOTIONSENSE_CHIP_GPIO,
- .type = MOTIONSENSE_TYPE_SYNC,
- .location = MOTIONSENSE_LOC_CAMERA,
- .drv = &sync_drv,
- .default_range = 0,
- .min_frequency = 0,
- .max_frequency = 1,
- },
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/waddledee/board.h b/board/waddledee/board.h
index d4f585a707..2ed6e13671 100644
--- a/board/waddledee/board.h
+++ b/board/waddledee/board.h
@@ -49,7 +49,6 @@
/* Sensors */
#define CONFIG_ACCEL_KX022 /* Lid accel */
#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */
-#define CONFIG_SYNC /* Camera VSYNC */
/* Sensors without hardware FIFO are in forced mode */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
@@ -65,9 +64,6 @@
#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
-#define CONFIG_SYNC_INT_EVENT \
- TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
-
#define CONFIG_TABLET_MODE
#define CONFIG_TABLET_MODE_SWITCH
#define CONFIG_GMR_TABLET_MODE
@@ -114,7 +110,6 @@ enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
- VSYNC,
SENSOR_COUNT
};
diff --git a/board/waddledee/gpio.inc b/board/waddledee/gpio.inc
index 612e3f0f5d..a7185eb8c8 100644
--- a/board/waddledee/gpio.inc
+++ b/board/waddledee/gpio.inc
@@ -40,7 +40,6 @@ GPIO_INT(LID_360_L, PIN(A, 7), GPIO_INT_BOTH, gmr_tablet_switch_isr)
GPIO_INT(VOLDN_BTN_ODL, PIN(I, 6), GPIO_INT_BOTH, button_interrupt)
GPIO_INT(VOLUP_BTN_ODL, PIN(I, 7), GPIO_INT_BOTH, button_interrupt)
GPIO_INT(BASE_SIXAXIS_INT_L, PIN(J, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, lsm6dsm_interrupt)
-GPIO_INT(CAM_EC_VSYNC, PIN(C, 7), GPIO_INT_RISING, sync_interrupt)
GPIO_INT(EC_WP_OD, PIN(A, 6), GPIO_INT_BOTH, switch_interrupt)
/* Power sequence GPIOs */
diff --git a/board/waddledoo/board.c b/board/waddledoo/board.c
index e9c7004d13..fb5c51a0a6 100644
--- a/board/waddledoo/board.c
+++ b/board/waddledoo/board.c
@@ -19,7 +19,6 @@
#include "driver/bc12/pi3usb9201.h"
#include "driver/charger/isl923x.h"
#include "driver/retimer/nb7v904m.h"
-#include "driver/sync.h"
#include "driver/tcpm/raa489000.h"
#include "driver/tcpm/tcpci.h"
#include "driver/usb_mux/pi3usb3x532.h"
@@ -433,17 +432,6 @@ struct motion_sensor_t motion_sensors[] = {
.min_frequency = BMI_GYRO_MIN_FREQ,
.max_frequency = BMI_GYRO_MAX_FREQ,
},
- [VSYNC] = {
- .name = "Camera VSYNC",
- .active_mask = SENSOR_ACTIVE_S0,
- .chip = MOTIONSENSE_CHIP_GPIO,
- .type = MOTIONSENSE_TYPE_SYNC,
- .location = MOTIONSENSE_LOC_CAMERA,
- .drv = &sync_drv,
- .default_range = 0,
- .min_frequency = 0,
- .max_frequency = 1,
- },
};
const unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors);
diff --git a/board/waddledoo/board.h b/board/waddledoo/board.h
index dce01cf67c..3f788e0392 100644
--- a/board/waddledoo/board.h
+++ b/board/waddledoo/board.h
@@ -105,7 +105,6 @@
#define CONFIG_ACCEL_BMA255 /* Lid accel */
#define CONFIG_ACCELGYRO_BMI160 /* Base accel */
-#define CONFIG_SYNC /* Camera VSYNC */
/* Lid operates in forced mode, base in FIFO */
#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
@@ -116,7 +115,6 @@
#define CONFIG_ACCEL_INTERRUPTS
#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
-#define CONFIG_SYNC_INT_EVENT TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
#define CONFIG_LID_ANGLE
#define CONFIG_LID_ANGLE_UPDATE
@@ -153,7 +151,6 @@ enum sensor_id {
LID_ACCEL,
BASE_ACCEL,
BASE_GYRO,
- VSYNC,
SENSOR_COUNT
};
diff --git a/board/waddledoo/gpio.inc b/board/waddledoo/gpio.inc
index 6a3eb1e570..e6bc32af1e 100644
--- a/board/waddledoo/gpio.inc
+++ b/board/waddledoo/gpio.inc
@@ -38,7 +38,6 @@ GPIO_INT(VOLUP_BTN_ODL, PIN(7, 3), GPIO_INT_BOTH | GPIO_PULL_UP, button_interr
GPIO_INT(LID_OPEN, PIN(D, 2), GPIO_INT_BOTH, lid_interrupt)
GPIO_INT(EC_WP_OD, PIN(A, 1), GPIO_INT_BOTH, switch_interrupt)
GPIO_INT(BASE_SIXAXIS_INT_L, PIN(5, 6), GPIO_INT_FALLING | GPIO_SEL_1P8V, bmi160_interrupt)
-GPIO_INT(CAM_EC_VSYNC, PIN(0, 0), GPIO_INT_FALLING | GPIO_SEL_1P8V, sync_interrupt)
GPIO_INT(LID_360_L, PIN(9, 5), GPIO_INT_BOTH, gmr_tablet_switch_isr)
/* I2C Ports */
View Lorry Controller Status