summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README10
-rw-r--r--board/daisy/board.c29
-rw-r--r--board/pit/board.c2
-rw-r--r--board/pit/board.h1
-rw-r--r--board/puppy/board.c2
-rw-r--r--board/puppy/board.h1
-rw-r--r--board/snow/board.c2
-rw-r--r--board/snow/board.h1
-rw-r--r--board/spring/board.c2
-rw-r--r--board/spring/board.h1
-rw-r--r--common/pmu_tps65090.c22
-rw-r--r--include/config.h25
-rw-r--r--include/pmu_tpschrome.h7
13 files changed, 59 insertions, 46 deletions
diff --git a/README b/README
index 499e4bf9ec..4190514c93 100644
--- a/README
+++ b/README
@@ -28,6 +28,9 @@ by Google. See below diagram for architecture.
Build Options
=============
+NOTE: see include/config.h for the current list. The information
+below will be moved there over time.
+
- CONFIG_WATCHDOG_HELP
Try to detect a watchdog that is about to fire, and print a trace.
@@ -62,13 +65,6 @@ Build Options
AC power is not connected, and high when it is connected. This
uses GPIO_AC_STATUS for this purpose.
-- CONFIG_PMU_FORCE_FET
-
- Force switching on and off the FETs on the PMU controlling various
- power rails during AP startup and shutdown sequences.
- This is mainly useful for bringup when we don't have the corresponding
- sequences in the AP code.
-
- CONFIG_KEYBOARD_TEST
Turn on keyboard testing functionality. This enables a message which
diff --git a/board/daisy/board.c b/board/daisy/board.c
index dbd27ed0ef..d9a384983d 100644
--- a/board/daisy/board.c
+++ b/board/daisy/board.c
@@ -163,3 +163,32 @@ void keyboard_suppress_noise(void)
gpio_set_level(GPIO_CODEC_INT, 0);
gpio_set_level(GPIO_CODEC_INT, 1);
}
+
+/**
+ * Board-specific PMU init.
+ */
+
+#define CG_CTRL0 0x04
+#define CG_CTRL3 0x07
+
+int pmu_board_init(void)
+{
+ int failure = 0;
+
+ /* Init configuration
+ * Fast charge timer : 2 hours
+ * Charger : disable
+ * External pin control : enable
+ *
+ * TODO: move settings to battery pack specific init
+ */
+ if (!failure)
+ failure = pmu_write(CG_CTRL0, 2);
+ /* Limit full charge current to 50%
+ * TODO: remove this temporary hack.
+ */
+ if (!failure)
+ failure = pmu_write(CG_CTRL3, 0xbb);
+
+ return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
+}
diff --git a/board/pit/board.c b/board/pit/board.c
index 5ba14e3439..018fbbf0f8 100644
--- a/board/pit/board.c
+++ b/board/pit/board.c
@@ -100,7 +100,6 @@ void board_config_post_gpio_init(void)
gpio_set_alternate_function(GPIO_B, (1 << 3), GPIO_ALT_TIM2);
}
-#ifdef CONFIG_PMU_BOARD_INIT
int pmu_board_init(void)
{
int ver, failure = 0;
@@ -162,4 +161,3 @@ int pmu_board_init(void)
return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
}
-#endif /* CONFIG_BOARD_PMU_INIT */
diff --git a/board/pit/board.h b/board/pit/board.h
index 2877c030c7..7ef77aa2e2 100644
--- a/board/pit/board.h
+++ b/board/pit/board.h
@@ -34,7 +34,6 @@
#define CONFIG_I2C
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_LID_SWITCH
-#define CONFIG_PMU_BOARD_INIT
#define CONFIG_PMU_HARD_RESET
#define CONFIG_PMU_TPS65090
#define CONFIG_SPI
diff --git a/board/puppy/board.c b/board/puppy/board.c
index 0835305c91..1d288d6848 100644
--- a/board/puppy/board.c
+++ b/board/puppy/board.c
@@ -97,7 +97,6 @@ void board_config_post_gpio_init(void)
GPIO_ALT_USART);
}
-#ifdef CONFIG_PMU_BOARD_INIT
int pmu_board_init(void)
{
int ver, failure = 0;
@@ -159,4 +158,3 @@ int pmu_board_init(void)
return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
}
-#endif /* CONFIG_BOARD_PMU_INIT */
diff --git a/board/puppy/board.h b/board/puppy/board.h
index 9059447155..f4f3b9a90d 100644
--- a/board/puppy/board.h
+++ b/board/puppy/board.h
@@ -34,7 +34,6 @@
#define CONFIG_I2C
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_LID_SWITCH
-#define CONFIG_PMU_BOARD_INIT
#define CONFIG_PMU_HARD_RESET
#define CONFIG_PMU_TPS65090
#define CONFIG_SPI
diff --git a/board/snow/board.c b/board/snow/board.c
index 4b9c0cdcc8..ef5f8488c8 100644
--- a/board/snow/board.c
+++ b/board/snow/board.c
@@ -195,7 +195,6 @@ static void board_shutdown_hook(void)
}
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_shutdown_hook, HOOK_PRIO_DEFAULT);
-#ifdef CONFIG_PMU_BOARD_INIT
int pmu_board_init(void)
{
int ver, failure = 0;
@@ -257,4 +256,3 @@ int pmu_board_init(void)
return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
}
-#endif /* CONFIG_BOARD_PMU_INIT */
diff --git a/board/snow/board.h b/board/snow/board.h
index d80fd28892..add3a9a8ef 100644
--- a/board/snow/board.h
+++ b/board/snow/board.h
@@ -38,7 +38,6 @@
#define CONFIG_KEYBOARD_PROTOCOL_MKBP
#define CONFIG_KEYBOARD_SUPPRESS_NOISE
#define CONFIG_LID_SWITCH
-#define CONFIG_PMU_BOARD_INIT
#define CONFIG_PMU_HARD_RESET
#define CONFIG_PMU_TPS65090
diff --git a/board/spring/board.c b/board/spring/board.c
index ff7c0fe5b3..98ffe3882e 100644
--- a/board/spring/board.c
+++ b/board/spring/board.c
@@ -203,7 +203,6 @@ static void board_shutdown_hook(void)
}
DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_shutdown_hook, HOOK_PRIO_DEFAULT);
-#ifdef CONFIG_PMU_BOARD_INIT
int pmu_board_init(void)
{
int failure = 0;
@@ -239,4 +238,3 @@ int pmu_board_init(void)
return failure ? EC_ERROR_UNKNOWN : EC_SUCCESS;
}
-#endif /* CONFIG_BOARD_PMU_INIT */
diff --git a/board/spring/board.h b/board/spring/board.h
index be759987fe..eda82603c8 100644
--- a/board/spring/board.h
+++ b/board/spring/board.h
@@ -40,7 +40,6 @@
#define CONFIG_LID_SWITCH
#define CONFIG_LOW_POWER_IDLE /* Use STOP mode when we have nothing to do */
#define CONFIG_LED_DRIVER_LP5562
-#define CONFIG_PMU_BOARD_INIT
#define CONFIG_PMU_FORCE_FET /* Always enable 3G modem power rail */
#define CONFIG_PMU_HARD_RESET
#define CONFIG_PMU_TPS65090
diff --git a/common/pmu_tps65090.c b/common/pmu_tps65090.c
index 431b22ac06..c797919da2 100644
--- a/common/pmu_tps65090.c
+++ b/common/pmu_tps65090.c
@@ -587,26 +587,8 @@ void pmu_init(void)
int failure = 0, retries_remaining = 3;
while (--retries_remaining >= 0) {
- failure = 0;
-#ifdef CONFIG_PMU_BOARD_INIT
- if (!failure)
- failure = pmu_board_init();
-#else
- /* Init configuration
- * Fast charge timer : 2 hours
- * Charger : disable
- * External pin control : enable
- *
- * TODO: move settings to battery pack specific init
- */
- if (!failure)
- failure = pmu_write(CG_CTRL0, 2);
- /* Limit full charge current to 50%
- * TODO: remove this temporary hack.
- */
- if (!failure)
- failure = pmu_write(CG_CTRL3, 0xbb);
-#endif
+ failure = pmu_board_init();
+
/* Enable interrupts */
if (!failure) {
failure = pmu_write(IRQ1MASK,
diff --git a/include/config.h b/include/config.h
index 3e7e6ad1a2..d86c6381d2 100644
--- a/include/config.h
+++ b/include/config.h
@@ -63,7 +63,6 @@
/*****************************************************************************/
-#undef CONFIG_BOARD_PMU_INIT
#undef CONFIG_BOARD_POST_GPIO_INIT
#undef CONFIG_BOARD_PRE_INIT
#undef CONFIG_BOARD_VERSION
@@ -108,6 +107,7 @@
#undef CONFIG_CHIPSET_IVYBRIDGE
#undef CONFIG_CMD_COMXTEST
+#undef CONFIG_CMD_DISCHARGE_ON_AC /* TODO(rspangler): poorly named */
#undef CONFIG_CMD_ECTEMP
#undef CONFIG_CMD_PLL
#undef CONFIG_CMD_PMU
@@ -193,11 +193,31 @@
#undef CONFIG_PANIC_HELP
#undef CONFIG_PECI
-#undef CONFIG_PMU_BOARD_INIT
+/*****************************************************************************/
+/* PMU config */
+
+/*
+ * Force switching on and off the FETs on the PMU controlling various power
+ * rails during AP startup and shutdown sequences. This is mainly useful for
+ * bringup when we don't have the corresponding sequences in the AP code.
+ *
+ * Currently supported only on spring platform.
+ */
#undef CONFIG_PMU_FORCE_FET
+
+/*
+ * Enable hard-resetting the PMU from the EC. The implementation is rather
+ * hacky; it simply shorts out the 3.3V rail to force the PMIC to panic. We
+ * need this unfortunate hack because it's the only way to reset the I2C engine
+ * inside the PMU.
+ */
#undef CONFIG_PMU_HARD_RESET
+
+/* Compile support for TPS65090 PMU */
#undef CONFIG_PMU_TPS65090
+/*****************************************************************************/
+
#undef CONFIG_POWER_BUTTON
#undef CONFIG_POWER_BUTTON_X86
#undef CONFIG_PSTATE_AT_END
@@ -207,7 +227,6 @@
#undef CONFIG_RAM_BASE
#undef CONFIG_RAM_SIZE
#undef CONFIG_SAVE_VBOOT_HASH
-#undef CONFIG_SOMETHING
#undef CONFIG_SPI
#undef CONFIG_STACK_SIZE
#undef CONFIG_SWITCH
diff --git a/include/pmu_tpschrome.h b/include/pmu_tpschrome.h
index fc25fd345c..7c610a01b6 100644
--- a/include/pmu_tpschrome.h
+++ b/include/pmu_tpschrome.h
@@ -286,15 +286,14 @@ enum charging_state charge_get_state(void);
*/
int charge_keep_power_off(void);
-#ifdef CONFIG_PMU_BOARD_INIT
/**
* Initialize PMU registers using board settings.
*
- * Boards may supply this function if needed. This will be called from
- * pmu_init().
+ * Boards must supply this function. This will be called from pmu_init().
+ *
+ * @return EC_SUCCESS, or non-zero if error.
*/
int pmu_board_init(void);
-#endif
#endif /* __CROS_EC_TPSCHROME_H */
View Lorry Controller Status