summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/glados_pd/board.c11
-rw-r--r--board/glados_pd/board.h3
-rw-r--r--board/glados_pd/gpio.inc20
l---------board/oak_pd1
l---------board/oak_pd/Makefile1
-rw-r--r--board/oak_pd/board.c157
-rw-r--r--board/oak_pd/board.h123
l---------board/oak_pd/board_revs.h1
-rw-r--r--board/oak_pd/build.mk16
-rw-r--r--board/oak_pd/ec.tasklist24
-rw-r--r--board/oak_pd/gpio.inc67
-rw-r--r--board/oak_pd/usb_pd_config.h327
-rw-r--r--driver/tcpm/tcpci.c2
13 files changed, 17 insertions, 736 deletions
diff --git a/board/glados_pd/board.c b/board/glados_pd/board.c
index 791d29a097..f03af33041 100644
--- a/board/glados_pd/board.c
+++ b/board/glados_pd/board.c
@@ -17,6 +17,7 @@
#include "system.h"
#include "task.h"
#include "usb_pd.h"
+#include "usb_pd_tcpc.h"
#include "util.h"
#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
@@ -32,16 +33,6 @@ void pd_send_ec_int(void)
gpio_set_level(GPIO_EC_INT, !ec_int_status);
}
-void vbus0_evt(enum gpio_signal signal)
-{
- task_wake(TASK_ID_PD_C0);
-}
-
-void vbus1_evt(enum gpio_signal signal)
-{
- task_wake(TASK_ID_PD_C1);
-}
-
void board_config_pre_init(void)
{
/* enable SYSCFG clock */
diff --git a/board/glados_pd/board.h b/board/glados_pd/board.h
index e87ef45e82..b576a257e9 100644
--- a/board/glados_pd/board.h
+++ b/board/glados_pd/board.h
@@ -3,7 +3,7 @@
* found in the LICENSE file.
*/
-/* gladoes_pd board configuration */
+/* glados_pd board configuration */
#ifndef __CROS_EC_BOARD_H
#define __CROS_EC_BOARD_H
@@ -63,6 +63,7 @@
#define CONFIG_USB_PD_INTERNAL_COMP
#define CONFIG_USB_PD_PORT_COUNT 2
#define CONFIG_USB_PD_TCPC
+#define CONFIG_USB_PD_TCPM_VBUS
#define CONFIG_USBC_VCONN
#define CONFIG_VBOOT_HASH
#define CONFIG_WATCHDOG
diff --git a/board/glados_pd/gpio.inc b/board/glados_pd/gpio.inc
index 67f52124d6..689b37d052 100644
--- a/board/glados_pd/gpio.inc
+++ b/board/glados_pd/gpio.inc
@@ -6,8 +6,8 @@
*/
/* Interrupts */
-GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(C, 14), GPIO_INT_BOTH, vbus0_evt)
-GPIO_INT(USB_C1_VBUS_WAKE_L, PIN(C, 15), GPIO_INT_BOTH, vbus1_evt)
+GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(C, 14), GPIO_INT_BOTH, pd_vbus_evt_p0)
+GPIO_INT(USB_C1_VBUS_WAKE_L, PIN(C, 15), GPIO_INT_BOTH, pd_vbus_evt_p1)
/* PD RX/TX */
GPIO(USB_C0_CC1_PD, PIN(A, 2), GPIO_ANALOG)
@@ -22,11 +22,11 @@ GPIO(USB_C1_CC2_TX_SEL, PIN(B, 0), GPIO_OUT_LOW) /* C1_CC2_TX_SEL */
GPIO(USB_C0_CC2_TX_DATA, PIN(A, 6), GPIO_INPUT)
GPIO(USB_PD_VBUS_WAKE, PIN(C, 13), GPIO_INPUT)
-GPIO(PP3300_USB_PD_EN, PIN(A, 15), GPIO_OUT_HIGH)
-GPIO(USB_C0_CC1_VCONN1_EN, PIN(B, 1), GPIO_OUT_LOW)
-GPIO(USB_C0_CC2_VCONN1_EN, PIN(B, 2), GPIO_OUT_LOW)
-GPIO(USB_C1_CC1_VCONN1_EN, PIN(B, 9), GPIO_OUT_LOW)
-GPIO(USB_C1_CC2_VCONN1_EN, PIN(F, 0), GPIO_OUT_LOW)
+GPIO(PP3300_USB_PD_EN, PIN(A, 15), GPIO_OUT_HIGH)
+GPIO(USB_C0_CC1_VCONN1_EN, PIN(B, 1), GPIO_OUT_LOW)
+GPIO(USB_C0_CC2_VCONN1_EN, PIN(B, 2), GPIO_OUT_LOW)
+GPIO(USB_C1_CC1_VCONN1_EN, PIN(B, 9), GPIO_OUT_LOW)
+GPIO(USB_C1_CC2_VCONN1_EN, PIN(F, 0), GPIO_OUT_LOW)
GPIO(USB_C0_HOST_HIGH, PIN(A, 3), GPIO_OUT_LOW)
GPIO(USB_C1_HOST_HIGH, PIN(A, 7), GPIO_OUT_LOW)
@@ -42,8 +42,12 @@ GPIO(USB_C1_CC2_ODL, PIN(A, 8), GPIO_ODR_LOW)
GPIO(SLAVE_I2C_SCL, PIN(B, 6), GPIO_INPUT)
GPIO(SLAVE_I2C_SDA, PIN(B, 7), GPIO_INPUT)
-/* Case closed debugging. */
+#ifdef BOARD_OAK_PD
+GPIO(EC_INT, PIN(B, 5), GPIO_OUT_HIGH)
+#else
GPIO(EC_INT, PIN(A, 14), GPIO_OUT_HIGH)
+#endif
+
UNIMPLEMENTED(WP_L)
UNIMPLEMENTED(ENTERING_RW)
diff --git a/board/oak_pd b/board/oak_pd
new file mode 120000
index 0000000000..0b248b1273
--- /dev/null
+++ b/board/oak_pd
@@ -0,0 +1 @@
+glados_pd \ No newline at end of file
diff --git a/board/oak_pd/Makefile b/board/oak_pd/Makefile
deleted file mode 120000
index 94aaae2c4d..0000000000
--- a/board/oak_pd/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-../../Makefile \ No newline at end of file
diff --git a/board/oak_pd/board.c b/board/oak_pd/board.c
deleted file mode 100644
index 16c3ba604c..0000000000
--- a/board/oak_pd/board.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-/* oak_pd board configuration */
-
-#include "adc.h"
-#include "adc_chip.h"
-#include "common.h"
-#include "console.h"
-#include "gpio.h"
-#include "hooks.h"
-#include "host_command.h"
-#include "i2c.h"
-#include "registers.h"
-#include "system.h"
-#include "task.h"
-#include "usb_pd.h"
-#include "usb_pd_tcpc.h"
-#include "util.h"
-
-#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args)
-
-/* Indicate which source is driving the ec_int line. */
-static uint32_t ec_int_status;
-
-static uint32_t pd_status_flags;
-
-void pd_send_ec_int(void)
-{
- /* If any sources are active, then drive the line low */
- gpio_set_level(GPIO_EC_INT, !ec_int_status);
-}
-
-void board_config_pre_init(void)
-{
- /* enable SYSCFG clock */
- STM32_RCC_APB2ENR |= 1 << 0;
- /*
- * the DMA mapping is :
- * Chan 2 : TIM1_CH1 (C0 RX)
- * Chan 3 : SPI1_TX (C0 TX)
- * Chan 4 : TIM3_CH1 (C1 RX)
- * Chan 5 : SPI2_TX (C1 TX)
- */
-}
-
-#include "gpio_list.h"
-
-/* Initialize board. */
-static void board_init(void)
-{
- /* Enable interrupts on VBUS transitions. */
- gpio_enable_interrupt(GPIO_USB_C0_VBUS_WAKE_L);
- gpio_enable_interrupt(GPIO_USB_C1_VBUS_WAKE_L);
-
- /* Set PD MCU system status bits */
- if (system_jumped_to_this_image())
- pd_status_flags |= PD_STATUS_JUMPED_TO_IMAGE;
- if (system_get_image_copy() == SYSTEM_IMAGE_RW)
- pd_status_flags |= PD_STATUS_IN_RW;
-
- /* OAK_PD: TODO: Power management of ARM based system */
-}
-DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT);
-
-/* ADC channels */
-const struct adc_t adc_channels[] = {
- /* USB PD CC lines sensing. Converted to mV (3300mV/4096). */
- [ADC_C1_CC1_PD] = {"C1_CC1_PD", 3300, 4096, 0, STM32_AIN(0)},
- [ADC_C0_CC1_PD] = {"C0_CC1_PD", 3300, 4096, 0, STM32_AIN(2)},
- [ADC_C0_CC2_PD] = {"C0_CC2_PD", 3300, 4096, 0, STM32_AIN(4)},
- [ADC_C1_CC2_PD] = {"C1_CC2_PD", 3300, 4096, 0, STM32_AIN(5)},
-};
-BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT);
-
-/* I2C ports */
-const struct i2c_port_t i2c_ports[] = {
- {"slave", I2C_PORT_SLAVE, 1000, GPIO_SLAVE_I2C_SCL, GPIO_SLAVE_I2C_SDA}
-};
-const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports);
-
-void tcpc_alert(int port)
-{
- /*
- * This function is called when the TCPC sets one of
- * bits in the Alert register and that bit's corresponding
- * location in the Alert_Mask register is set.
- */
- atomic_or(&ec_int_status, port ?
- PD_STATUS_TCPC_ALERT_1 : PD_STATUS_TCPC_ALERT_0);
- pd_send_ec_int();
-}
-
-void tcpc_alert_clear(int port)
-{
- /*
- * The TCPM has acknowledged all Alert bits and the
- * Alert# line needs to be set inactive. Clear
- * the corresponding port's bit in the static variable.
- */
- atomic_clear(&ec_int_status, port ?
- PD_STATUS_TCPC_ALERT_1 : PD_STATUS_TCPC_ALERT_0);
- pd_send_ec_int();
-}
-
-static void system_hibernate_deferred(void)
-{
- ccprintf("EC requested hibernate\n");
- cflush();
- system_hibernate(0, 0);
-}
-DECLARE_DEFERRED(system_hibernate_deferred);
-
-/****************************************************************************/
-/* Console commands */
-static int command_ec_int(int argc, char **argv)
-{
- /* Indicate that ec_int gpio is active due to host command */
- atomic_or(&ec_int_status, PD_STATUS_HOST_EVENT);
- pd_send_ec_int();
-
- return EC_SUCCESS;
-}
-DECLARE_CONSOLE_COMMAND(ecint, command_ec_int,
- "",
- "Toggle EC interrupt line",
- NULL);
-
-static int ec_status_host_cmd(struct host_cmd_handler_args *args)
-{
- const struct ec_params_pd_status *p = args->params;
- struct ec_response_pd_status *r = args->response;
-
- /*
- * ec_int_status is used to store state for HOST_EVENT,
- * TCPC 0 Alert, and TCPC 1 Alert bits.
- */
- r->status = ec_int_status | pd_status_flags;
- args->response_size = sizeof(*r);
-
- /* Have the PD follow the EC into hibernate. */
- if (p->status & EC_STATUS_HIBERNATING)
- hook_call_deferred(system_hibernate_deferred, 0);
-
- /*
- * If the source of the EC int line was HOST_EVENT, it has
- * been acknowledged so can always clear HOST_EVENT bit
- * from the ec_int_status variable
- */
- atomic_clear(&ec_int_status, PD_STATUS_HOST_EVENT);
-
- return EC_RES_SUCCESS;
-}
-DECLARE_HOST_COMMAND(EC_CMD_PD_EXCHANGE_STATUS, ec_status_host_cmd,
- EC_VER_MASK(EC_VER_PD_EXCHANGE_STATUS));
-
diff --git a/board/oak_pd/board.h b/board/oak_pd/board.h
deleted file mode 100644
index bc5894ac14..0000000000
--- a/board/oak_pd/board.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* oak_pd board configuration */
-
-#ifndef __CROS_EC_BOARD_H
-#define __CROS_EC_BOARD_H
-
-#include "board_revs.h"
-
-/*
- * The console task is too big to include in both RO and RW images. Therefore,
- * if the console task is defined, then only build an RW image. This can be
- * useful for debugging to have a full console. Otherwise, without this task,
- * a full RO and RW is built with a limited one-way output console.
- */
-#ifdef HAS_TASK_CONSOLE
-/*
- * The flash size is only 32kB.
- * No space for 2 partitions,
- * put only RW at the beginning of the flash
- */
-#undef CONFIG_FW_INCLUDE_RO
-#undef CONFIG_RW_MEM_OFF
-#define CONFIG_RW_MEM_OFF 0
-#undef CONFIG_RO_SIZE
-#define CONFIG_RO_SIZE 0
-/* Fake full size if we had a RO partition */
-#undef CONFIG_RW_SIZE
-#define CONFIG_RW_SIZE CONFIG_FLASH_SIZE
-#endif /* HAS_TASK_CONSOLE */
-
-/* 48 MHz SYSCLK clock frequency */
-#define CPU_CLOCK 48000000
-
-/* the UART console is on USART1 (PA9/PA10) */
-#undef CONFIG_UART_CONSOLE
-#define CONFIG_UART_CONSOLE 1
-
-/* Optional features */
-#define CONFIG_ADC
-#undef CONFIG_ADC_WATCHDOG
-#define CONFIG_BOARD_PRE_INIT
-#define CONFIG_COMMON_GPIO_SHORTNAMES
-#undef CONFIG_DEBUG_ASSERT
-#define CONFIG_FORCE_CONSOLE_RESUME
-#define CONFIG_HIBERNATE
-#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP2)
-#undef CONFIG_HOSTCMD_EVENTS
-#define CONFIG_HW_CRC
-#define CONFIG_I2C
-#define CONFIG_I2C_SLAVE
-#undef CONFIG_LID_SWITCH
-#define CONFIG_LOW_POWER_IDLE
-#define CONFIG_LTO
-#define CONFIG_STM_HWTIMER32
-#undef CONFIG_TASK_PROFILING
-#undef CONFIG_UART_TX_BUF_SIZE
-#undef CONFIG_UART_TX_DMA
-#undef CONFIG_UART_RX_DMA
-#define CONFIG_UART_TX_BUF_SIZE 128
-#define CONFIG_USB_PD_DUAL_ROLE
-#define CONFIG_USB_PD_INTERNAL_COMP
-#define CONFIG_USB_PD_PORT_COUNT 2
-#define CONFIG_USB_PD_TCPC
-#define CONFIG_USB_PD_TCPM_VBUS
-#define CONFIG_USBC_VCONN
-#define CONFIG_VBOOT_HASH
-#undef CONFIG_WATCHDOG
-#undef CONFIG_WATCHDOG_HELP
-
-#ifdef HAS_TASK_CONSOLE
-#undef CONFIG_CONSOLE_HISTORY
-#define CONFIG_CONSOLE_HISTORY 2
-
-#else
-#undef CONFIG_CONSOLE_CMDHELP
-#define CONFIG_DEBUG_PRINTF
-#define UARTN CONFIG_UART_CONSOLE
-#define UARTN_BASE STM32_USART_BASE(CONFIG_UART_CONSOLE)
-#endif /* HAS_TASK_CONSOLE */
-
-/* Use PSTATE embedded in the RO image, not in its own erase block */
-#undef CONFIG_FLASH_PSTATE_BANK
-#undef CONFIG_FW_PSTATE_SIZE
-#define CONFIG_FW_PSTATE_SIZE 0
-
-/* I2C ports configuration */
-#define I2C_PORT_SLAVE 0
-#define I2C_PORT_EC I2C_PORT_SLAVE
-
-/* slave address for host commands */
-#ifdef HAS_TASK_HOSTCMD
-#define CONFIG_HOSTCMD_I2C_SLAVE_ADDR CONFIG_USB_PD_I2C_SLAVE_ADDR
-#endif
-
-#ifndef __ASSEMBLER__
-
-/* Timer selection */
-#define TIM_CLOCK32 2
-#define TIM_ADC 3
-
-#include "gpio_signal.h"
-
-/* ADC signal */
-enum adc_channel {
- ADC_C1_CC1_PD = 0,
- ADC_C0_CC1_PD,
- ADC_C0_CC2_PD,
- ADC_C1_CC2_PD,
- /* Number of ADC channels */
- ADC_CH_COUNT
-};
-
-/* 1.5A Rp */
-#define PD_SRC_VNC PD_SRC_1_5_VNC_MV
-#define PD_SRC_RD_THRESHOLD PD_SRC_1_5_RD_THRESH_MV
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __CROS_EC_BOARD_H */
diff --git a/board/oak_pd/board_revs.h b/board/oak_pd/board_revs.h
deleted file mode 120000
index 1d25900dd9..0000000000
--- a/board/oak_pd/board_revs.h
+++ /dev/null
@@ -1 +0,0 @@
-../oak/board_revs.h \ No newline at end of file
diff --git a/board/oak_pd/build.mk b/board/oak_pd/build.mk
deleted file mode 100644
index ef1c9f1a91..0000000000
--- a/board/oak_pd/build.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-# -*- makefile -*-
-# Copyright 2015 The Chromium OS Authors. All rights reserved.
-# Use of this source code is governed by a BSD-style license that can be
-# found in the LICENSE file.
-#
-# Board specific files build
-
-# the IC is STmicro STM32F051C8T
-CHIP:=stm32
-CHIP_FAMILY:=stm32f0
-CHIP_VARIANT:=stm32f05x
-
-board-y=board.o
-
-# This target builds RW only. Therefore, remove RO from dependencies.
-all_deps=$(patsubst ro,,$(def_all_deps))
diff --git a/board/oak_pd/ec.tasklist b/board/oak_pd/ec.tasklist
deleted file mode 100644
index 6401c10057..0000000000
--- a/board/oak_pd/ec.tasklist
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/**
- * List of enabled tasks in the priority order
- *
- * The first one has the lowest priority.
- *
- * For each task, use the macro TASK_ALWAYS(n, r, d, s) for base tasks and
- * TASK_NOTEST(n, r, d, s) for tasks that can be excluded in test binaries,
- * where :
- * 'n' in the name of the task
- * 'r' in the main routine of the task
- * 'd' in an opaque parameter passed to the routine at startup
- * 's' is the stack size in bytes; must be a multiple of 8
- */
-#define CONFIG_TASK_LIST \
- TASK_ALWAYS(HOOKS, hook_task, NULL, LARGER_TASK_STACK_SIZE) \
- TASK_NOTEST(HOSTCMD, host_command_task, NULL, TASK_STACK_SIZE) \
- /* TASK_ALWAYS(CONSOLE, console_task, NULL, TASK_STACK_SIZE) */ \
- TASK_ALWAYS(PD_C0, pd_task, NULL, TASK_STACK_SIZE) \
- TASK_ALWAYS(PD_C1, pd_task, NULL, TASK_STACK_SIZE)
diff --git a/board/oak_pd/gpio.inc b/board/oak_pd/gpio.inc
deleted file mode 100644
index 228c37bea3..0000000000
--- a/board/oak_pd/gpio.inc
+++ /dev/null
@@ -1,67 +0,0 @@
-/* -*- mode:c -*-
- *
- * Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Interrupts */
-GPIO_INT(USB_C0_VBUS_WAKE_L, PIN(C, 14), GPIO_INT_BOTH, pd_vbus_evt_p0)
-GPIO_INT(USB_C1_VBUS_WAKE_L, PIN(C, 15), GPIO_INT_BOTH, pd_vbus_evt_p1)
-
-/* PD RX/TX */
-GPIO(USB_C0_CC1_PD, PIN(A, 2), GPIO_ANALOG)
-GPIO(USB_C_REF, PIN(A, 1), GPIO_ANALOG)
-GPIO(USB_C1_CC1_PD, PIN(A, 0), GPIO_ANALOG)
-GPIO(USB_C0_CC2_PD, PIN(A, 4), GPIO_ANALOG)
-GPIO(USB_C1_CC2_PD, PIN(A, 5), GPIO_ANALOG)
-
-GPIO(USB_C1_CCX_TX_DATA, PIN(B, 14), GPIO_INPUT)
-GPIO(USB_C0_CC1_TX_DATA, PIN(B, 4), GPIO_INPUT)
-GPIO(USB_C1_CC2_TX_SEL, PIN(B, 0), GPIO_OUT_LOW) /* C1_CC2_TX_SEL */
-GPIO(USB_C0_CC2_TX_DATA, PIN(A, 6), GPIO_INPUT)
-GPIO(USB_PD_VBUS_WAKE, PIN(C, 13), GPIO_INPUT)
-
-GPIO(PP3300_USB_PD_EN, PIN(A, 15), GPIO_OUT_HIGH)
-GPIO(USB_C0_CC1_VCONN1_EN, PIN(B, 1), GPIO_OUT_LOW)
-GPIO(USB_C0_CC2_VCONN1_EN, PIN(B, 2), GPIO_OUT_LOW)
-GPIO(USB_C1_CC1_VCONN1_EN, PIN(B, 9), GPIO_OUT_LOW)
-GPIO(USB_C1_CC2_VCONN1_EN, PIN(F, 0), GPIO_OUT_LOW)
-
-GPIO(USB_C0_HOST_HIGH, PIN(A, 3), GPIO_OUT_LOW)
-GPIO(USB_C1_HOST_HIGH, PIN(A, 7), GPIO_OUT_LOW)
-GPIO(USB_C0_CC1_ODL, PIN(A, 11), GPIO_ODR_LOW)
-GPIO(USB_C0_CC2_ODL, PIN(A, 12), GPIO_ODR_LOW)
-GPIO(USB_C1_CC1_ODL, PIN(B, 12), GPIO_ODR_LOW)
-GPIO(USB_C1_CC2_ODL, PIN(A, 8), GPIO_ODR_LOW)
-
-/*
- * I2C pins should be configured as inputs until I2C module is
- * initialized. This will avoid driving the lines unintentionally.
- */
-GPIO(SLAVE_I2C_SCL, PIN(B, 6), GPIO_INPUT)
-GPIO(SLAVE_I2C_SDA, PIN(B, 7), GPIO_INPUT)
-
-#if BOARD_REV == OAK_REV1
-GPIO(EC_INT, PIN(A, 14), GPIO_OUT_HIGH)
-#else
-GPIO(EC_INT, PIN(B, 5), GPIO_OUT_HIGH)
-#endif
-
-UNIMPLEMENTED(WP_L)
-UNIMPLEMENTED(ENTERING_RW)
-
-#if 0
-/* Alternate functions */
-GPIO(USB_C1_TX_CLKOUT, PIN(B, 15), GPIO_OUT_LOW)
-GPIO(USB_C0_TX_CLKOUT, PIN(B, 8), GPIO_OUT_LOW)
-GPIO(USB_C1_TX_CLKIN, PIN(B, 13), GPIO_OUT_LOW)
-GPIO(USB_C0_TX_CLKIN, PIN(B, 3), GPIO_OUT_LOW)
-#endif
-
-ALTERNATE(PIN_MASK(B, 0x0008), 0, MODULE_USB_PD, 0) /* SPI1: SCK(PB3) */
-ALTERNATE(PIN_MASK(B, 0x2000), 0, MODULE_USB_PD, 0) /* SPI2: SCK(PB13) */
-ALTERNATE(PIN_MASK(B, 0x0100), 2, MODULE_USB_PD, 0) /* TIM16_CH1: PB8 */
-ALTERNATE(PIN_MASK(B, 0x8000), 1, MODULE_USB_PD, 0) /* TIM15_CH2: PB15 */
-ALTERNATE(PIN_MASK(A, 0x0600), 1, MODULE_UART, 0) /* USART1: PA9/PA10 */
-ALTERNATE(PIN_MASK(B, 0x00c0), 1, MODULE_I2C, 0) /* I2C SLAVE:PB6/7 */
diff --git a/board/oak_pd/usb_pd_config.h b/board/oak_pd/usb_pd_config.h
deleted file mode 100644
index 8df3f84dc1..0000000000
--- a/board/oak_pd/usb_pd_config.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/* Copyright 2015 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#include "adc.h"
-#include "chip/stm32/registers.h"
-#include "gpio.h"
-#include "ec_commands.h"
-
-/* USB Power delivery board configuration */
-
-#ifndef __CROS_EC_USB_PD_CONFIG_H
-#define __CROS_EC_USB_PD_CONFIG_H
-
-/* Timer selection for baseband PD communication */
-#define TIM_CLOCK_PD_TX_C0 16
-#define TIM_CLOCK_PD_RX_C0 1
-#define TIM_CLOCK_PD_TX_C1 15
-#define TIM_CLOCK_PD_RX_C1 3
-
-/* Timer channel */
-#define TIM_TX_CCR_C0 1
-#define TIM_RX_CCR_C0 1
-#define TIM_TX_CCR_C1 2
-#define TIM_RX_CCR_C1 1
-
-#define TIM_CLOCK_PD_TX(p) ((p) ? TIM_CLOCK_PD_TX_C1 : TIM_CLOCK_PD_TX_C0)
-#define TIM_CLOCK_PD_RX(p) ((p) ? TIM_CLOCK_PD_RX_C1 : TIM_CLOCK_PD_RX_C0)
-
-/* RX timer capture/compare register */
-#define TIM_CCR_C0 (&STM32_TIM_CCRx(TIM_CLOCK_PD_RX_C0, TIM_RX_CCR_C0))
-#define TIM_CCR_C1 (&STM32_TIM_CCRx(TIM_CLOCK_PD_RX_C1, TIM_RX_CCR_C1))
-#define TIM_RX_CCR_REG(p) ((p) ? TIM_CCR_C1 : TIM_CCR_C0)
-
-/* TX and RX timer register */
-#define TIM_REG_TX_C0 (STM32_TIM_BASE(TIM_CLOCK_PD_TX_C0))
-#define TIM_REG_RX_C0 (STM32_TIM_BASE(TIM_CLOCK_PD_RX_C0))
-#define TIM_REG_TX_C1 (STM32_TIM_BASE(TIM_CLOCK_PD_TX_C1))
-#define TIM_REG_RX_C1 (STM32_TIM_BASE(TIM_CLOCK_PD_RX_C1))
-#define TIM_REG_TX(p) ((p) ? TIM_REG_TX_C1 : TIM_REG_TX_C0)
-#define TIM_REG_RX(p) ((p) ? TIM_REG_RX_C1 : TIM_REG_RX_C0)
-
-/* use the hardware accelerator for CRC */
-#define CONFIG_HW_CRC
-
-/* TX uses SPI1 on PB3-4 for port C0, SPI2 on PB 13-14 for port C1 */
-#define SPI_REGS(p) ((p) ? STM32_SPI2_REGS : STM32_SPI1_REGS)
-static inline void spi_enable_clock(int port)
-{
- if (port == 0)
- STM32_RCC_APB2ENR |= STM32_RCC_PB2_SPI1;
- else
- STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2;
-}
-
-/* DMA for transmit uses DMA CH3 for C0 and DMA_CH5 for C1 */
-#define DMAC_SPI_TX(p) ((p) ? STM32_DMAC_CH5 : STM32_DMAC_CH3)
-
-/* RX uses COMP1 and TIM1 CH1 on port C0 and COMP2 and TIM3_CH1 for port C1*/
-/* C1 RX use CMP1, TIM3_CH1, DMA_CH4 */
-#define CMP1OUTSEL STM32_COMP_CMP1OUTSEL_TIM3_IC1
-/* C0 RX use CMP2, TIM1_CH1, DMA_CH2 */
-#define CMP2OUTSEL STM32_COMP_CMP2OUTSEL_TIM1_IC1
-
-#define TIM_TX_CCR_IDX(p) ((p) ? TIM_TX_CCR_C1 : TIM_TX_CCR_C0)
-#define TIM_RX_CCR_IDX(p) ((p) ? TIM_RX_CCR_C1 : TIM_RX_CCR_C0)
-#define TIM_CCR_CS 1
-
-/*
- * EXTI line 21 is connected to the CMP1 output,
- * EXTI line 22 is connected to the CMP2 output,
- * C0 uses CMP2, and C1 uses CMP1.
- */
-#define EXTI_COMP_MASK(p) ((p) ? (1<<21) : (1 << 22))
-
-#define IRQ_COMP STM32_IRQ_COMP
-/* triggers packet detection on comparator falling edge */
-#define EXTI_XTSR STM32_EXTI_FTSR
-
-/* DMA for receive uses DMA_CH2 for C0 and DMA_CH4 for C1 */
-#define DMAC_TIM_RX(p) ((p) ? STM32_DMAC_CH4 : STM32_DMAC_CH2)
-
-/* the pins used for communication need to be hi-speed */
-static inline void pd_set_pins_speed(int port)
-{
- if (port == 0) {
- /* 40 MHz pin speed on SPI PB3&4,
- * (USB_C0_TX_CLKIN & USB_C0_CC1_TX_DATA)
- */
- STM32_GPIO_OSPEEDR(GPIO_B) |= 0x000003C0;
- /* 40 MHz pin speed on TIM16_CH1 (PB8),
- * (USB_C0_TX_CLKOUT)
- */
- STM32_GPIO_OSPEEDR(GPIO_B) |= 0x00030000;
- } else {
- /* 40 MHz pin speed on SPI PB13/14,
- * (USB_C1_TX_CLKIN & USB_C1_CCX_TX_DATA)
- */
- STM32_GPIO_OSPEEDR(GPIO_B) |= 0x3C000000;
- /* 40 MHz pin speed on TIM15_CH2 (PB15) */
- STM32_GPIO_OSPEEDR(GPIO_B) |= 0xC0000000;
- }
-}
-
-/* Reset SPI peripheral used for TX */
-static inline void pd_tx_spi_reset(int port)
-{
- if (port == 0) {
- /* Reset SPI1 */
- STM32_RCC_APB2RSTR |= (1 << 12);
- STM32_RCC_APB2RSTR &= ~(1 << 12);
- } else {
- /* Reset SPI2 */
- STM32_RCC_APB1RSTR |= (1 << 14);
- STM32_RCC_APB1RSTR &= ~(1 << 14);
- }
-}
-
-/* Drive the CC line from the TX block */
-static inline void pd_tx_enable(int port, int polarity)
-{
- if (port == 0) {
- /* put SPI function on TX pin */
- if (polarity) {
- /* USB_C0_CC2_TX_DATA: PA6 is SPI1 MISO */
- gpio_set_alternate_function(GPIO_A, 0x0040, 0);
- /* MCU ADC PA4 pin output low */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- & ~(3 << (2*4))) /* PA4 disable ADC */
- | (1 << (2*4)); /* Set as GPO */
- gpio_set_level(GPIO_USB_C0_CC2_PD, 0);
- } else {
- /* USB_C0_CC1_TX_DATA: PB4 is SPI1 MISO */
- gpio_set_alternate_function(GPIO_B, 0x0010, 0);
- /* MCU ADC PA2 pin output low */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- & ~(3 << (2*2))) /* PA2 disable ADC */
- | (1 << (2*2)); /* Set as GPO */
- gpio_set_level(GPIO_USB_C0_CC1_PD, 0);
- }
- } else {
- /* put SPI function on TX pin */
- /* USB_C1_CCX_TX_DATA: PB14 is SPI1 MISO */
- gpio_set_alternate_function(GPIO_B, 0x4000, 0);
- /* MCU ADC pin output low */
- if (polarity) {
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- & ~(3 << (2*5))) /* PA5 disable ADC */
- | (1 << (2*5)); /* Set as GPO */
- gpio_set_level(GPIO_USB_C1_CC2_PD, 0);
- } else {
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- & ~(3 << (2*0))) /* PA0 disable ADC */
- | (1 << (2*0)); /* Set as GPO */
- gpio_set_level(GPIO_USB_C1_CC1_PD, 0);
- }
-
- /*
- * There is a pin muxer to select CC1 or CC2 TX_DATA,
- * Pin mux is controlled by USB_C1_CC2_TX_SEL pin,
- * USB_C1_CC1_TX_DATA will be selected, if polarity is 0,
- * USB_C1_CC2_TX_DATA will be selected, if polarity is 1 .
- */
- gpio_set_level(GPIO_USB_C1_CC2_TX_SEL, polarity);
- }
-}
-
-/* Put the TX driver in Hi-Z state */
-static inline void pd_tx_disable(int port, int polarity)
-{
- if (port == 0) {
- if (polarity) {
- /* Set TX_DATA to Hi-Z, PA6 is SPI1 MISO */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- & ~(3 << (2*6)));
- /* set ADC PA4 pin to ADC function (Hi-Z) */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- | (3 << (2*4))); /* PA4 as ADC */
- } else {
- /* Set TX_DATA to Hi-Z, PB4 is SPI1 MISO */
- STM32_GPIO_MODER(GPIO_B) = (STM32_GPIO_MODER(GPIO_B)
- & ~(3 << (2*4)));
- /* set ADC PA2 pin to ADC function (Hi-Z) */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- | (3 << (2*2))); /* PA2 as ADC */
- }
- } else {
- /* Set TX_DATA (PB14) Hi-Z */
- STM32_GPIO_MODER(GPIO_B) = (STM32_GPIO_MODER(GPIO_B)
- & ~(3 << (2*14)));
- if (polarity) {
- /* set ADC PA5 pin to ADC function (Hi-Z) */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- | (3 << (2*5))); /* PA5 as ADC */
- } else {
- /* set ADC PA0 pin to ADC function (Hi-Z) */
- STM32_GPIO_MODER(GPIO_A) = (STM32_GPIO_MODER(GPIO_A)
- | (3 << (2*0))); /* PA0 as ADC */
- }
- }
-}
-
-/* we know the plug polarity, do the right configuration */
-static inline void pd_select_polarity(int port, int polarity)
-{
- uint32_t val = STM32_COMP_CSR;
-
- /* Use window mode so that COMP1 and COMP2 share non-inverting input */
- val |= STM32_COMP_CMP1EN | STM32_COMP_CMP2EN | STM32_COMP_WNDWEN;
-
- if (port == 0) {
- /* C0 use the right comparator inverted input for COMP2 */
- STM32_COMP_CSR = (val & ~STM32_COMP_CMP2INSEL_MASK) |
- (polarity ? STM32_COMP_CMP2INSEL_INM4 /* PA4: C0_CC2 */
- : STM32_COMP_CMP2INSEL_INM6);/* PA2: C0_CC1 */
- } else {
- /* C1 use the right comparator inverted input for COMP1 */
- STM32_COMP_CSR = (val & ~STM32_COMP_CMP1INSEL_MASK) |
- (polarity ? STM32_COMP_CMP1INSEL_INM5 /* PA5: C1_CC2 */
- : STM32_COMP_CMP1INSEL_INM6);/* PA0: C1_CC1 */
- }
-}
-
-/* Initialize pins used for TX and put them in Hi-Z */
-static inline void pd_tx_init(void)
-{
- gpio_config_module(MODULE_USB_PD, 1);
-}
-static inline void pd_set_host_mode(int port, int enable)
-{
- if (port == 0) {
- if (enable) {
- /* Pull up for host mode */
- gpio_set_flags(GPIO_USB_C0_HOST_HIGH, GPIO_OUTPUT);
- gpio_set_level(GPIO_USB_C0_HOST_HIGH, 1);
- /* High-Z is used for host mode. */
- gpio_set_level(GPIO_USB_C0_CC1_ODL, 1);
- gpio_set_level(GPIO_USB_C0_CC2_ODL, 1);
- /* Set TX Hi-Z */
- gpio_set_flags(GPIO_USB_C0_CC1_TX_DATA, GPIO_INPUT);
- gpio_set_flags(GPIO_USB_C0_CC2_TX_DATA, GPIO_INPUT);
- } else {
- /* Set HOST_HIGH to High-Z for device mode. */
- gpio_set_flags(GPIO_USB_C0_HOST_HIGH, GPIO_INPUT);
- /* Pull low for device mode. */
- gpio_set_level(GPIO_USB_C0_CC1_ODL, 0);
- gpio_set_level(GPIO_USB_C0_CC2_ODL, 0);
- }
- } else {
- if (enable) {
- /* Pull up for host mode */
- gpio_set_flags(GPIO_USB_C1_HOST_HIGH, GPIO_OUTPUT);
- gpio_set_level(GPIO_USB_C1_HOST_HIGH, 1);
- /* High-Z is used for host mode. */
- gpio_set_level(GPIO_USB_C1_CC1_ODL, 1);
- gpio_set_level(GPIO_USB_C1_CC2_ODL, 1);
- /* Set TX Hi-Z */
- gpio_set_flags(GPIO_USB_C1_CCX_TX_DATA, GPIO_INPUT);
- } else {
- /* Set HOST_HIGH to High-Z for device mode. */
- gpio_set_flags(GPIO_USB_C1_HOST_HIGH, GPIO_INPUT);
- /* Pull low for device mode. */
- gpio_set_level(GPIO_USB_C1_CC1_ODL, 0);
- gpio_set_level(GPIO_USB_C1_CC2_ODL, 0);
- }
- }
-}
-
-/**
- * Initialize various GPIOs and interfaces to safe state at start of pd_task.
- *
- * These include:
- * VBUS, charge path based on power role.
- * Physical layer CC transmit.
- * VCONNs disabled.
- *
- * @param port USB-C port number
- * @param power_role Power role of device
- */
-static inline void pd_config_init(int port, uint8_t power_role)
-{
- /*
- * Set CC pull resistors, and charge_en and vbus_en GPIOs to match
- * the initial role.
- */
- pd_set_host_mode(port, power_role);
-
- /* Initialize TX pins and put them in Hi-Z */
- pd_tx_init();
-
- if (port == 0) {
- gpio_set_level(GPIO_USB_C0_CC1_VCONN1_EN, 0);
- gpio_set_level(GPIO_USB_C0_CC2_VCONN1_EN, 0);
- } else {
- gpio_set_level(GPIO_USB_C1_CC1_VCONN1_EN, 0);
- gpio_set_level(GPIO_USB_C1_CC2_VCONN1_EN, 0);
- }
-}
-
-static inline int pd_adc_read(int port, int cc)
-{
- if (port == 0)
- return adc_read_channel(cc ? ADC_C0_CC2_PD : ADC_C0_CC1_PD);
- else
- return adc_read_channel(cc ? ADC_C1_CC2_PD : ADC_C1_CC1_PD);
-}
-
-static inline void pd_set_vconn(int port, int polarity, int enable)
-{
- /* Set VCONN on the opposite CC line from the polarity */
- if (port == 0) {
- gpio_set_level(polarity ? GPIO_USB_C0_CC1_VCONN1_EN :
- GPIO_USB_C0_CC2_VCONN1_EN, enable);
- /* Set TX_DATA pin to Hi-Z */
- gpio_set_flags(polarity ? GPIO_USB_C0_CC1_TX_DATA :
- GPIO_USB_C0_CC2_TX_DATA, GPIO_INPUT);
- } else {
- gpio_set_level(polarity ? GPIO_USB_C1_CC1_VCONN1_EN :
- GPIO_USB_C1_CC2_VCONN1_EN, enable);
- /* Set TX_DATA pin to Hi-Z */
- gpio_set_flags(GPIO_USB_C1_CCX_TX_DATA, GPIO_INPUT);
- }
-}
-
-#endif /* __CROS_EC_USB_PD_CONFIG_H */
-
diff --git a/driver/tcpm/tcpci.c b/driver/tcpm/tcpci.c
index 6d0a38f3c1..b01b7d806e 100644
--- a/driver/tcpm/tcpci.c
+++ b/driver/tcpm/tcpci.c
@@ -260,8 +260,8 @@ void tcpc_alert(int port)
#if defined(CONFIG_USB_PD_TCPM_VBUS) && defined(CONFIG_USB_CHARGER)
/* Update charge manager with new VBUS state */
usb_charger_vbus_change(port, tcpc_vbus[port]);
-#endif /* CONFIG_USB_PD_TCPM_VBUS && CONFIG_USB_CHARGER */
task_wake(PD_PORT_TO_TASK_ID(port));
+#endif /* CONFIG_USB_PD_TCPM_VBUS && CONFIG_USB_CHARGER */
}
}
if (status & TCPC_REG_ALERT_RX_STATUS) {
View Lorry Controller Status