diff options
Diffstat (limited to 'baseboard/asurada/baseboard.c')
-rw-r--r-- | baseboard/asurada/baseboard.c | 101 |
1 files changed, 0 insertions, 101 deletions
diff --git a/baseboard/asurada/baseboard.c b/baseboard/asurada/baseboard.c deleted file mode 100644 index c89348a562..0000000000 --- a/baseboard/asurada/baseboard.c +++ /dev/null @@ -1,101 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Asurada baseboard-specific configuration */ - -#include "adc.h" -#include "button.h" -#include "charge_manager.h" -#include "charger.h" -#include "charger.h" -#include "charge_state.h" -#include "charge_state_v2.h" -#include "chipset.h" -#include "common.h" -#include "console.h" -#include "driver/accelgyro_bmi_common.h" -#include "driver/accel_lis2dw12.h" -#include "driver/als_tcs3400.h" -#include "driver/bc12/mt6360.h" -#include "driver/charger/isl923x.h" -#include "driver/ppc/syv682x.h" -#include "driver/tcpm/it83xx_pd.h" -#include "driver/temp_sensor/thermistor.h" -#include "extpower.h" -#include "gpio.h" -#include "hooks.h" -#include "i2c.h" -#include "it5205_sbu.h" -#include "keyboard_scan.h" -#include "lid_switch.h" -#include "motion_sense.h" -#include "power_button.h" -#include "power.h" -#include "regulator.h" -#include "spi.h" -#include "switch.h" -#include "tablet_mode.h" -#include "task.h" -#include "temp_sensor.h" -#include "timer.h" -#include "uart.h" - -#include "gpio_list.h" - -/* Wake-up pins for hibernate */ -enum gpio_signal hibernate_wake_pins[] = { - GPIO_AC_PRESENT, - GPIO_LID_OPEN, - GPIO_POWER_BUTTON_L, -}; -int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* - * I2C channels (A, B, and C) are using the same timing registers (00h~07h) - * at default. - * In order to set frequency independently for each channels, - * We use timing registers 09h~0Bh, and the supported frequency will be: - * 50KHz, 100KHz, 400KHz, or 1MHz. - * I2C channels (D, E and F) can be set different frequency on different ports. - * The I2C(D/E/F) frequency depend on the frequency of SMBus Module and - * the individual prescale register. - * The frequency of SMBus module is 24MHz on default. - * The allowed range of I2C(D/E/F) frequency is as following setting. - * SMBus Module Freq = PLL_CLOCK / ((IT83XX_ECPM_SCDCR2 & 0x0F) + 1) - * (SMBus Module Freq / 510) <= I2C Freq <= (SMBus Module Freq / 8) - * Channel D has multi-function and can be used as UART interface. - * Channel F is reserved for EC debug. - */ - -/* I2C ports */ -const struct i2c_port_t i2c_ports[] = { - {"bat_chg", IT83XX_I2C_CH_A, 100, GPIO_I2C_A_SCL, GPIO_I2C_A_SDA}, - {"sensor", IT83XX_I2C_CH_B, 400, GPIO_I2C_B_SCL, GPIO_I2C_B_SDA}, - {"usb0", IT83XX_I2C_CH_C, 400, GPIO_I2C_C_SCL, GPIO_I2C_C_SDA}, - {"usb1", IT83XX_I2C_CH_E, 400, GPIO_I2C_E_SCL, GPIO_I2C_E_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -int board_allow_i2c_passthru(int port) -{ - return (port == I2C_PORT_VIRTUAL_BATTERY); -} - -const struct cc_para_t *board_get_cc_tuning_parameter(enum usbpd_port port) -{ - const static struct cc_para_t - cc_parameter[CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT] = { - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - { - .rising_time = IT83XX_TX_PRE_DRIVING_TIME_1_UNIT, - .falling_time = IT83XX_TX_PRE_DRIVING_TIME_2_UNIT, - }, - }; - - return &cc_parameter[port]; -} |