diff options
Diffstat (limited to 'baseboard/goroh/usb_pd_policy.c')
-rw-r--r-- | baseboard/goroh/usb_pd_policy.c | 210 |
1 files changed, 210 insertions, 0 deletions
diff --git a/baseboard/goroh/usb_pd_policy.c b/baseboard/goroh/usb_pd_policy.c new file mode 100644 index 0000000000..2643d198ad --- /dev/null +++ b/baseboard/goroh/usb_pd_policy.c @@ -0,0 +1,210 @@ +/* Copyright 2021 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ +#include "charge_manager.h" +#include "chipset.h" +#include "timer.h" +#include "usb_dp_alt_mode.h" +#include "usb_mux.h" +#include "usb_pd.h" +#include "usbc_ppc.h" + +#if CONFIG_USB_PD_3A_PORTS != 1 +#error Goroh reference must have at least one 3.0 A port +#endif + +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) + +int svdm_get_hpd_gpio(int port) +{ + /* HPD is low active, inverse the result */ + return !gpio_get_level(GPIO_EC_DPBRDG_HPD_ODL); +} + +void svdm_set_hpd_gpio(int port, int en) +{ + /* + * HPD is low active, inverse the en + * TODO: C0&C1 shares the same HPD, implement FCFS policy. + */ + gpio_set_level(GPIO_EC_DPBRDG_HPD_ODL, !en); +} + +/** + * Is the port fine to be muxed its DisplayPort lines? + * + * Only one port can be muxed to DisplayPort at a time. + * + * @param port Port number of TCPC. + * @return 1 is fine; 0 is bad as other port is already muxed; + */ +static int is_dp_muxable(int port) +{ + int i; + + for (i = 0; i < board_get_usb_pd_port_count(); i++) { + if (i != port) { + if (usb_mux_get(i) & USB_PD_MUX_DP_ENABLED) + return 0; + } + } + + return 1; +} + +__override int svdm_dp_attention(int port, uint32_t *payload) +{ + int lvl = PD_VDO_DPSTS_HPD_LVL(payload[1]); + int irq = PD_VDO_DPSTS_HPD_IRQ(payload[1]); +#ifdef CONFIG_USB_PD_DP_HPD_GPIO + int cur_lvl = svdm_get_hpd_gpio(port); +#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ + + dp_status[port] = payload[1]; + + if (!is_dp_muxable(port)) { + /* TODO(waihong): Info user? */ + CPRINTS("p%d: The other port is already muxed.", port); + return 0; /* nak */ + } + + if (lvl) + gpio_set_level_verbose(CC_USBPD, GPIO_DP_AUX_PATH_SEL, port); + + if (chipset_in_state(CHIPSET_STATE_ANY_SUSPEND) && + (irq || lvl)) + /* + * Wake up the AP. IRQ or level high indicates a DP sink is now + * present. + */ + if (IS_ENABLED(CONFIG_MKBP_EVENT)) + pd_notify_dp_alt_mode_entry(port); + + /* Its initial DP status message prior to config */ + if (!(dp_flags[port] & DP_FLAGS_DP_ON)) { + if (lvl) + dp_flags[port] |= DP_FLAGS_HPD_HI_PENDING; + return 1; + } + +#ifdef CONFIG_USB_PD_DP_HPD_GPIO + if (irq && !lvl) { + /* + * IRQ can only be generated when the level is high, because + * the IRQ is signaled by a short low pulse from the high level. + */ + CPRINTF("ERR:HPD:IRQ&LOW\n"); + return 0; /* nak */ + } + + if (irq && cur_lvl) { + uint64_t now = get_time().val; + /* wait for the minimum spacing between IRQ_HPD if needed */ + if (now < svdm_hpd_deadline[port]) + usleep(svdm_hpd_deadline[port] - now); + + /* generate IRQ_HPD pulse */ + svdm_set_hpd_gpio(port, 0); + /* + * b/171172053#comment14: since the HPD_DSTREAM_DEBOUNCE_IRQ is + * very short (500us), we can use udelay instead of usleep for + * more stable pulse period. + */ + udelay(HPD_DSTREAM_DEBOUNCE_IRQ); + svdm_set_hpd_gpio(port, 1); + } else { + svdm_set_hpd_gpio(port, lvl); + } + + /* set the minimum time delay (2ms) for the next HPD IRQ */ + svdm_hpd_deadline[port] = get_time().val + HPD_USTREAM_DEBOUNCE_LVL; +#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ + + usb_mux_hpd_update(port, lvl, irq); + +#ifdef USB_PD_PORT_TCPC_MST + if (port == USB_PD_PORT_TCPC_MST) + baseboard_mst_enable_control(port, lvl); +#endif + + /* ack */ + return 1; +} + +__override void svdm_exit_dp_mode(int port) +{ +#ifdef CONFIG_USB_PD_DP_HPD_GPIO + svdm_set_hpd_gpio(port, 0); +#endif /* CONFIG_USB_PD_DP_HPD_GPIO */ + usb_mux_hpd_update(port, 0, 0); + +#ifdef USB_PD_PORT_TCPC_MST + if (port == USB_PD_PORT_TCPC_MST) + baseboard_mst_enable_control(port, 0); +#endif +} + +int pd_snk_is_vbus_provided(int port) +{ + /* TODO(yllin): check SNK VBUS detection */ + return ppc_is_vbus_present(port); + + /* + * (b:181203590#comment20) TODO(yllin): use + * PD_VSINK_DISCONNECT_PD for non-5V case. + */ + return charge_manager_get_vbus_voltage(port) >= + PD_V_SINK_DISCONNECT_MAX; +} + +void pd_power_supply_reset(int port) +{ + int prev_en; + + prev_en = ppc_is_sourcing_vbus(port); + + /* Disable VBUS. */ + ppc_vbus_source_enable(port, 0); + + /* Enable discharge if we were previously sourcing 5V */ + if (prev_en) + pd_set_vbus_discharge(port, 1); + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); +} + +int pd_check_vconn_swap(int port) +{ + /* Allow Vconn swap if AP is on. */ + return chipset_in_state(CHIPSET_STATE_SUSPEND | CHIPSET_STATE_ON); +} + +int pd_set_power_supply_ready(int port) +{ + int rv; + + /* Disable charging. */ + rv = ppc_vbus_sink_enable(port, 0); + if (rv) + return rv; + + pd_set_vbus_discharge(port, 0); + + /* Provide Vbus. */ + rv = ppc_vbus_source_enable(port, 1); + if (rv) + return rv; + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); + + return EC_SUCCESS; +} + +int board_vbus_source_enabled(int port) +{ + return ppc_is_sourcing_vbus(port); +} |