diff options
Diffstat (limited to 'baseboard/grunt/baseboard.h')
-rw-r--r-- | baseboard/grunt/baseboard.h | 47 |
1 files changed, 23 insertions, 24 deletions
diff --git a/baseboard/grunt/baseboard.h b/baseboard/grunt/baseboard.h index 5a79c48c63..1c19c05330 100644 --- a/baseboard/grunt/baseboard.h +++ b/baseboard/grunt/baseboard.h @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -8,15 +8,15 @@ #ifndef __CROS_EC_BASEBOARD_H #define __CROS_EC_BASEBOARD_H -#if (defined(VARIANT_GRUNT_TCPC_0_ANX3429) \ - + defined(VARIANT_GRUNT_TCPC_0_ANX3447)) != 1 +#if (defined(VARIANT_GRUNT_TCPC_0_ANX3429) + \ + defined(VARIANT_GRUNT_TCPC_0_ANX3447)) != 1 #error Must choose VARIANT_GRUNT_TCPC_0_ANX3429 or VARIANT_GRUNT_TCPC_0_ANX3447 #endif /* NPCX7 config */ -#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ -#define NPCX_TACH_SEL2 0 /* No tach. */ -#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ +#define NPCX_UART_MODULE2 1 /* GPIO64/65 are used as UART pins. */ +#define NPCX_TACH_SEL2 0 /* No tach. */ +#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ /* Internal SPI flash on NPCX7 */ /* Flash is 1MB but reserve half for future use. */ @@ -85,7 +85,7 @@ * ACOK from ISL9238 sometimes has a negative pulse after connecting * USB-C power. We want to ignore it. b/77455171 */ -#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#undef CONFIG_EXTPOWER_DEBOUNCE_MS #define CONFIG_EXTPOWER_DEBOUNCE_MS 200 #define CONFIG_EXTPOWER_GPIO #define CONFIG_POWER_COMMON @@ -101,7 +101,6 @@ */ #define CONFIG_BOARD_RESET_AFTER_POWER_ON - #define CONFIG_KEYBOARD_COL2_INVERTED #define CONFIG_KEYBOARD_PROTOCOL_8042 @@ -139,13 +138,13 @@ #define CONFIG_USB_PORT_POWER_DUMB #define USB_PORT_COUNT 2 -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 30000 /* us */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 +#define PD_OPERATING_POWER_MW 15000 +#define PD_MAX_POWER_MW 45000 +#define PD_MAX_CURRENT_MA 3000 +#define PD_MAX_VOLTAGE_MV 20000 /* * Require PD negotiation to be complete when we are in a low-battery condition @@ -158,15 +157,15 @@ #undef CONFIG_PORT80_HISTORY_LEN #define CONFIG_PORT80_HISTORY_LEN 256 -#define I2C_PORT_BATTERY I2C_PORT_POWER -#define I2C_PORT_CHARGER I2C_PORT_POWER -#define I2C_PORT_POWER NPCX_I2C_PORT0_0 -#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 -#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 -#define I2C_PORT_THERMAL_AP NPCX_I2C_PORT3_0 -#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 +#define I2C_PORT_BATTERY I2C_PORT_POWER +#define I2C_PORT_CHARGER I2C_PORT_POWER +#define I2C_PORT_POWER NPCX_I2C_PORT0_0 +#define I2C_PORT_TCPC0 NPCX_I2C_PORT1_0 +#define I2C_PORT_TCPC1 NPCX_I2C_PORT2_0 +#define I2C_PORT_THERMAL_AP NPCX_I2C_PORT3_0 +#define I2C_PORT_SENSOR NPCX_I2C_PORT7_0 /* Accelerometer and Gyroscope are the same device. */ -#define I2C_PORT_ACCEL I2C_PORT_SENSOR +#define I2C_PORT_ACCEL I2C_PORT_SENSOR /* Sensors */ #define CONFIG_MKBP_EVENT @@ -184,8 +183,8 @@ #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) #endif /* VARIANT_GRUNT_NO_SENSORS */ -#define USB_PD_PORT_ANX74XX 0 -#define USB_PD_PORT_PS8751 1 +#define USB_PD_PORT_ANX74XX 0 +#define USB_PD_PORT_PS8751 1 #ifndef __ASSEMBLER__ |