diff options
Diffstat (limited to 'baseboard/kalista')
| -rw-r--r-- | baseboard/kalista/baseboard.c | 138 | ||||
| -rw-r--r-- | baseboard/kalista/baseboard.h | 74 | ||||
| -rw-r--r-- | baseboard/kalista/build.mk | 2 | ||||
| -rw-r--r-- | baseboard/kalista/led.c | 10 | ||||
| -rw-r--r-- | baseboard/kalista/usb_pd_pdo.c | 7 | ||||
| -rw-r--r-- | baseboard/kalista/usb_pd_pdo.h | 2 | ||||
| -rw-r--r-- | baseboard/kalista/usb_pd_policy.c | 9 |
7 files changed, 115 insertions, 127 deletions
diff --git a/baseboard/kalista/baseboard.c b/baseboard/kalista/baseboard.c index b06547106a..e929e5449c 100644 --- a/baseboard/kalista/baseboard.c +++ b/baseboard/kalista/baseboard.c @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -48,8 +48,8 @@ #include "usb_pd_tcpm.h" #include "util.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) static uint8_t board_version; static uint32_t oem; @@ -99,14 +99,15 @@ const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); /* ADC channels */ const struct adc_t adc_channels[] = { /* Vbus sensing (1/10 voltage divider). */ - [ADC_VBUS] = {"VBUS", NPCX_ADC_CH2, ADC_MAX_VOLT*10, ADC_READ_MAX+1, 0}, + [ADC_VBUS] = { "VBUS", NPCX_ADC_CH2, ADC_MAX_VOLT * 10, + ADC_READ_MAX + 1, 0 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); /* TODO: Verify fan control and mft */ const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_FAN_PWR_EN, }; @@ -123,46 +124,36 @@ const struct fan_t fans[] = { BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_0] = { NPCX_MFT_MODULE_2, TCKC_LFCLK, PWM_CH_FAN }, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); -const struct i2c_port_t i2c_ports[] = { - { - .name = "tcpc", - .port = I2C_PORT_TCPC0, - .kbps = 400, - .scl = GPIO_I2C0_0_SCL, - .sda = GPIO_I2C0_0_SDA - }, - { - .name = "eeprom", - .port = I2C_PORT_EEPROM, - .kbps = 400, - .scl = GPIO_I2C0_1_SCL, - .sda = GPIO_I2C0_1_SDA - }, - { - .name = "backlight", - .port = I2C_PORT_BACKLIGHT, - .kbps = 100, - .scl = GPIO_I2C1_SCL, - .sda = GPIO_I2C1_SDA - }, - { - .name = "pmic", - .port = I2C_PORT_PMIC, - .kbps = 400, - .scl = GPIO_I2C2_SCL, - .sda = GPIO_I2C2_SDA - }, - { - .name = "thermal", - .port = I2C_PORT_THERMAL, - .kbps = 400, - .scl = GPIO_I2C3_SCL, - .sda = GPIO_I2C3_SDA - }, +const struct i2c_port_t i2c_ports[] = { + { .name = "tcpc", + .port = I2C_PORT_TCPC0, + .kbps = 400, + .scl = GPIO_I2C0_0_SCL, + .sda = GPIO_I2C0_0_SDA }, + { .name = "eeprom", + .port = I2C_PORT_EEPROM, + .kbps = 400, + .scl = GPIO_I2C0_1_SCL, + .sda = GPIO_I2C0_1_SDA }, + { .name = "backlight", + .port = I2C_PORT_BACKLIGHT, + .kbps = 100, + .scl = GPIO_I2C1_SCL, + .sda = GPIO_I2C1_SDA }, + { .name = "pmic", + .port = I2C_PORT_PMIC, + .kbps = 400, + .scl = GPIO_I2C2_SCL, + .sda = GPIO_I2C2_SDA }, + { .name = "thermal", + .port = I2C_PORT_THERMAL, + .kbps = 400, + .scl = GPIO_I2C3_SCL, + .sda = GPIO_I2C3_SDA }, }; const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); @@ -186,12 +177,15 @@ static int ps8751_tune_mux(const struct usb_mux *me) return EC_SUCCESS; } -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { { - .usb_port = 0, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .board_init = &ps8751_tune_mux, + .mux = + &(const struct usb_mux){ + .usb_port = 0, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .board_init = &ps8751_tune_mux, + }, }, }; @@ -234,14 +228,14 @@ void board_tcpc_init(void) */ for (int port = 0; port < CONFIG_USB_PD_PORT_MAX_COUNT; ++port) usb_mux_hpd_update(port, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); + USB_PD_MUX_HPD_IRQ_DEASSERTED); } -DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C+1); +DECLARE_HOOK(HOOK_INIT, board_tcpc_init, HOOK_PRIO_INIT_I2C + 1); uint16_t tcpc_get_alert_status(void) { if (!gpio_get_level(GPIO_USB_C0_PD_INT_ODL) && - gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) + gpio_get_level(GPIO_USB_C0_PD_RST_ODL)) return PD_STATUS_TCPC_ALERT_0; return 0; } @@ -254,10 +248,10 @@ uint16_t tcpc_get_alert_status(void) * src/mainboard/google/${board}/acpi/dptf.asl */ const struct temp_sensor_t temp_sensors[] = { - {"TMP431_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_LOCAL}, - {"TMP431_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, - TMP432_IDX_REMOTE1}, + { "TMP431_Internal", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, + TMP432_IDX_LOCAL }, + { "TMP431_Sensor_1", TEMP_SENSOR_TYPE_BOARD, tmp432_get_val, + TMP432_IDX_REMOTE1 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); @@ -270,9 +264,11 @@ struct ec_thermal_config thermal_params[] = { * {Twarn, Thigh, X }, <off> * fan_off, fan_max */ - {{0, C_TO_K(80), C_TO_K(81)}, {0, C_TO_K(78), 0}, - C_TO_K(4), C_TO_K(76)}, /* TMP431_Internal */ - {{0, 0, 0}, {0, 0, 0}, 0, 0}, /* TMP431_Sensor_1 */ + { { 0, C_TO_K(80), C_TO_K(81) }, + { 0, C_TO_K(78), 0 }, + C_TO_K(4), + C_TO_K(76) }, /* TMP431_Internal */ + { { 0, 0, 0 }, { 0, 0, 0 }, 0, 0 }, /* TMP431_Sensor_1 */ }; BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); @@ -441,9 +437,9 @@ int64_t get_time_dsw_pwrok(void) } const struct pwm_t pwm_channels[] = { - [PWM_CH_LED_RED] = { 3, PWM_CONFIG_DSLEEP, 100 }, + [PWM_CH_LED_RED] = { 3, PWM_CONFIG_DSLEEP, 100 }, [PWM_CH_LED_BLUE] = { 5, PWM_CONFIG_DSLEEP, 100 }, - [PWM_CH_FAN] = {4, PWM_CONFIG_OPEN_DRAIN, 25000}, + [PWM_CH_FAN] = { 4, PWM_CONFIG_OPEN_DRAIN, 25000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -455,21 +451,20 @@ struct fan_step { /* Note: Do not make the fan on/off point equal to 0 or 100 */ static const struct fan_step fan_table0[] = { - {.on = 0, .off = 5, .rpm = 0}, - {.on = 30, .off = 5, .rpm = 2180}, - {.on = 49, .off = 46, .rpm = 2680}, - {.on = 53, .off = 50, .rpm = 3300}, - {.on = 58, .off = 54, .rpm = 3760}, - {.on = 63, .off = 59, .rpm = 4220}, - {.on = 68, .off = 64, .rpm = 4660}, - {.on = 75, .off = 70, .rpm = 4900}, + { .on = 0, .off = 5, .rpm = 0 }, + { .on = 30, .off = 5, .rpm = 2180 }, + { .on = 49, .off = 46, .rpm = 2680 }, + { .on = 53, .off = 50, .rpm = 3300 }, + { .on = 58, .off = 54, .rpm = 3760 }, + { .on = 63, .off = 59, .rpm = 4220 }, + { .on = 68, .off = 64, .rpm = 4660 }, + { .on = 75, .off = 70, .rpm = 4900 }, }; /* All fan tables must have the same number of levels */ #define NUM_FAN_LEVELS ARRAY_SIZE(fan_table0) static const struct fan_step *fan_table = fan_table0; - static void cbi_init(void) { uint32_t val; @@ -489,8 +484,8 @@ DECLARE_HOOK(HOOK_INIT, cbi_init, HOOK_PRIO_INIT_I2C + 1); static void setup_bj(void) { - enum bj_adapter bj = (BJ_ADAPTER_135W_MASK & (1 << sku)) ? - BJ_135W_19V : BJ_90W_19V; + enum bj_adapter bj = (BJ_ADAPTER_135W_MASK & (1 << sku)) ? BJ_135W_19V : + BJ_90W_19V; gpio_set_level(GPIO_U22_90W, bj == BJ_90W_19V); } @@ -537,8 +532,7 @@ int fan_percent_to_rpm(int fan, int pct) previous_pct = pct; - if (fan_table[current_level].rpm != - fan_get_rpm_target(FAN_CH(fan))) + if (fan_table[current_level].rpm != fan_get_rpm_target(FAN_CH(fan))) cprints(CC_THERMAL, "Setting fan RPM to %d", fan_table[current_level].rpm); diff --git a/baseboard/kalista/baseboard.h b/baseboard/kalista/baseboard.h index 717d26b313..e3696ae48d 100644 --- a/baseboard/kalista/baseboard.h +++ b/baseboard/kalista/baseboard.h @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -12,7 +12,7 @@ * Allow dangerous commands. * TODO: Remove this config before production. */ -#undef CONFIG_SYSTEM_UNLOCKED +#undef CONFIG_SYSTEM_UNLOCKED #define CONFIG_USB_PD_COMM_LOCKED /* EC */ @@ -32,7 +32,7 @@ #define CONFIG_FPU #define CONFIG_I2C #define CONFIG_I2C_CONTROLLER -#undef CONFIG_LID_SWITCH +#undef CONFIG_LID_SWITCH #define CONFIG_POWER_BUTTON_IGNORE_LID #define CONFIG_PWM #define CONFIG_LTO @@ -47,7 +47,7 @@ #define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN #define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE #define CEC_GPIO_OUT GPIO_CEC_OUT -#define CEC_GPIO_IN GPIO_CEC_IN +#define CEC_GPIO_IN GPIO_CEC_IN #define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP #define CONFIG_FANS 1 #define CONFIG_FAN_RPM_CUSTOM @@ -64,13 +64,13 @@ #define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK #define CONFIG_CHIPSET_RESET_HOOK #define CONFIG_HOST_INTERFACE_ESPI -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 -#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S3 +#define CONFIG_HOST_INTERFACE_ESPI_VW_SLP_S4 #define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD #define CONFIG_HOSTCMD_PD_CONTROL #define CONFIG_EXTPOWER_GPIO -#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#undef CONFIG_EXTPOWER_DEBOUNCE_MS #define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 #define CONFIG_POWER_BUTTON #define CONFIG_POWER_BUTTON_X86 @@ -105,20 +105,20 @@ #define USB_PORT_COUNT 4 /* Optional feature to configure npcx chip */ -#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ -#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ -#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ /* I2C ports */ -#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 -#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 -#define I2C_PORT_BACKLIGHT NPCX_I2C_PORT1 -#define I2C_PORT_PMIC NPCX_I2C_PORT2 -#define I2C_PORT_THERMAL NPCX_I2C_PORT3 +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 +#define I2C_PORT_BACKLIGHT NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_THERMAL NPCX_I2C_PORT3 /* I2C addresses */ -#define I2C_ADDR_TCPC0_FLAGS 0x0b -#define I2C_ADDR_EEPROM_FLAGS 0x50 +#define I2C_ADDR_TCPC0_FLAGS 0x0b +#define I2C_ADDR_EEPROM_FLAGS 0x50 /* Verify and jump to RW image on boot */ #define CONFIG_VBOOT_EFS @@ -140,23 +140,22 @@ * end of RW_A and RW_B, respectively. */ #define CONFIG_RW_B -#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) -#undef CONFIG_RW_SIZE -#define CONFIG_RW_SIZE CONFIG_RO_SIZE -#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF -#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE) -#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) -#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \ - CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) +#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF +#undef CONFIG_RO_SIZE +#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE_BYTES / 4) +#undef CONFIG_RW_SIZE +#define CONFIG_RW_SIZE CONFIG_RO_SIZE +#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF +#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + CONFIG_RW_SIZE) +#define CONFIG_RW_A_SIGN_STORAGE_OFF \ + (CONFIG_RW_A_STORAGE_OFF + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) +#define CONFIG_RW_B_SIGN_STORAGE_OFF \ + (CONFIG_RW_B_STORAGE_OFF + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) #undef CONFIG_EC_PROTECTED_STORAGE_SIZE -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE +#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE #undef CONFIG_EC_WRITABLE_STORAGE_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE +#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE #define CONFIG_RWSIG #define CONFIG_RWSIG_TYPE_RWSIG @@ -182,15 +181,12 @@ enum charge_port { }; enum temp_sensor_id { - TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ - TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ + TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ + TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ TEMP_SENSOR_COUNT }; -enum adc_channel { - ADC_VBUS, - ADC_CH_COUNT -}; +enum adc_channel { ADC_VBUS, ADC_CH_COUNT }; enum pwm_channel { PWM_CH_LED_RED, @@ -223,8 +219,8 @@ enum OEM_ID { * delay to turn on the power supply max is ~16ms. * delay to turn off the power supply max is about ~180ms. */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ /* delay to turn on/off vconn */ diff --git a/baseboard/kalista/build.mk b/baseboard/kalista/build.mk index fb844b19f1..6bb55b2023 100644 --- a/baseboard/kalista/build.mk +++ b/baseboard/kalista/build.mk @@ -1,5 +1,5 @@ # -*- makefile -*- -# Copyright 2018 The Chromium OS Authors. All rights reserved. +# Copyright 2018 The ChromiumOS Authors # Use of this source code is governed by a BSD-style license that can be # found in the LICENSE file. # diff --git a/baseboard/kalista/led.c b/baseboard/kalista/led.c index e04eecf5e3..c72ce84bb0 100644 --- a/baseboard/kalista/led.c +++ b/baseboard/kalista/led.c @@ -1,4 +1,4 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. +/* Copyright 2018 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. * @@ -15,7 +15,7 @@ #include "timer.h" #include "util.h" -const enum ec_led_id supported_led_ids[] = {EC_LED_ID_POWER_LED}; +const enum ec_led_id supported_led_ids[] = { EC_LED_ID_POWER_LED }; const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); enum led_color { @@ -76,9 +76,9 @@ static int set_color(enum ec_led_id id, enum led_color color, int duty) } } -#define LED_PULSE_US (2 * SECOND) +#define LED_PULSE_US (2 * SECOND) /* 40 msec for nice and smooth transition. */ -#define LED_PULSE_TICK_US (40 * MSEC) +#define LED_PULSE_TICK_US (40 * MSEC) /* When pulsing is enabled, brightness is incremented by <duty_inc> every * <interval> usec from 0 to 100% in LED_PULSE_US usec. Then it's decremented @@ -181,7 +181,7 @@ void led_critical(void) set_color(EC_LED_ID_POWER_LED, LED_RED, 100); } -static int command_led(int argc, char **argv) +static int command_led(int argc, const char **argv) { enum ec_led_id id = EC_LED_ID_POWER_LED; diff --git a/baseboard/kalista/usb_pd_pdo.c b/baseboard/kalista/usb_pd_pdo.c index 0addbcc51c..067b8eb9e7 100644 --- a/baseboard/kalista/usb_pd_pdo.c +++ b/baseboard/kalista/usb_pd_pdo.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -7,9 +7,8 @@ #include "usb_pd.h" #include "usb_pd_pdo.h" -#define PDO_FIXED_FLAGS (PDO_FIXED_UNCONSTRAINED | \ - PDO_FIXED_DATA_SWAP | \ - PDO_FIXED_COMM_CAP) +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_UNCONSTRAINED | PDO_FIXED_DATA_SWAP | PDO_FIXED_COMM_CAP) const uint32_t pd_src_pdo[] = { PDO_FIXED(5000, 3000, PDO_FIXED_FLAGS), diff --git a/baseboard/kalista/usb_pd_pdo.h b/baseboard/kalista/usb_pd_pdo.h index 1dad035d3d..119658b8a5 100644 --- a/baseboard/kalista/usb_pd_pdo.h +++ b/baseboard/kalista/usb_pd_pdo.h @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ diff --git a/baseboard/kalista/usb_pd_policy.c b/baseboard/kalista/usb_pd_policy.c index 85b26aac76..017c340a1b 100644 --- a/baseboard/kalista/usb_pd_policy.c +++ b/baseboard/kalista/usb_pd_policy.c @@ -1,4 +1,4 @@ -/* Copyright 2017 The Chromium OS Authors. All rights reserved. +/* Copyright 2017 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -23,8 +23,8 @@ #include "usb_pd_pdo.h" #include "usb_pd_tcpm.h" -#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) -#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ##args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ##args) int board_vbus_source_enabled(int port) { @@ -58,8 +58,7 @@ int pd_snk_is_vbus_provided(int port) return !gpio_get_level(GPIO_USB_C0_VBUS_WAKE_L); } -__override void pd_check_pr_role(int port, - enum pd_power_role pr_role, +__override void pd_check_pr_role(int port, enum pd_power_role pr_role, int flags) { } |