1 files changed, 0 insertions, 81 deletions
diff --git a/baseboard/mancomb/usb_pd_policy.c b/baseboard/mancomb/usb_pd_policy.c
deleted file mode 100644
index 66b565382b..0000000000
--- a/baseboard/mancomb/usb_pd_policy.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* Copyright 2021 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Shared USB-C policy for Zork boards */
-
-#include "charge_manager.h"
-#include "chipset.h"
-#include "common.h"
-#include "compile_time_macros.h"
-#include "console.h"
-#include "ec_commands.h"
-#include "gpio.h"
-#include "system.h"
-#include "usb_mux.h"
-#include "usb_pd.h"
-#include "usbc_ppc.h"
-#include "util.h"
-
-int pd_check_vconn_swap(int port)
-{
-	/*
-	 * Do not allow vconn swap 5V rail is off
-	 * S5_PGOOD depends on PG_PP5000_S5 being asserted,
-	 * so GPIO_S5_PGOOD is a reasonable proxy for PP5000_S5
-	 */
-	return gpio_get_level(GPIO_S5_PGOOD);
-}
-
-void pd_power_supply_reset(int port)
-{
-	/*
-	 * Don't need to shutoff VBus if we are not sourcing it
-	 * TODO: Ensure Vbus sourcing is being disabled appropriately to
-	 *       avoid invalid TC states
-	 */
-	if (ppc_is_sourcing_vbus(port)) {
-		/* Disable VBUS. */
-		ppc_vbus_source_enable(port, 0);
-
-		/* Enable discharge if we were previously sourcing 5V */
-		if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE))
-			pd_set_vbus_discharge(port, 1);
-	}
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-}
-
-int pd_set_power_supply_ready(int port)
-{
-	int rv;
-
-	/* Disable charging. */
-	rv = ppc_vbus_sink_enable(port, 0);
-	if (rv)
-		return rv;
-
-	if (IS_ENABLED(CONFIG_USB_PD_DISCHARGE))
-		pd_set_vbus_discharge(port, 0);
-
-	/* Provide Vbus. */
-	rv = ppc_vbus_source_enable(port, 1);
-	if (rv)
-		return rv;
-
-	/* Notify host of power info change. */
-	pd_send_host_event(PD_EVENT_POWER_CHANGE);
-
-	return EC_SUCCESS;
-}
-
-int board_vbus_source_enabled(int port)
-{
-	/* Answer is always "no" from the BJ port */
-	if (port >= CONFIG_USB_PD_PORT_MAX_COUNT)
-		return 0;
-
-	return ppc_is_sourcing_vbus(port);
-}