diff options
Diffstat (limited to 'baseboard/nami/baseboard.h')
| -rw-r--r-- | baseboard/nami/baseboard.h | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/baseboard/nami/baseboard.h b/baseboard/nami/baseboard.h new file mode 100644 index 0000000000..1f5cb58585 --- /dev/null +++ b/baseboard/nami/baseboard.h @@ -0,0 +1,272 @@ +/* Copyright 2017 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Eve board configuration */ + +#ifndef __CROS_EC_BASEBOARD_H +#define __CROS_EC_BASEBOARD_H + +/* + * By default, enable all console messages except ACPI and host event because + * the sensor stack is generating a lot of activity. + */ +#define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) + +/* EC */ +#define CONFIG_ADC +#define CONFIG_BACKLIGHT_LID +#define CONFIG_BACKLIGHT_LID_ACTIVE_LOW +#define CONFIG_BOARD_VERSION_CBI +#define CONFIG_BOARD_FORCE_RESET_PIN +#define CONFIG_CRC8 +#define CONFIG_CROS_BOARD_INFO +#define CONFIG_CASE_CLOSED_DEBUG_EXTERNAL +#define CONFIG_DPTF +#define CONFIG_DPTF_DEVICE_ORIENTATION +#define CONFIG_FLASH_SIZE 0x80000 +#define CONFIG_FPU +#define CONFIG_I2C +#define CONFIG_I2C_MASTER +#define CONFIG_KEYBOARD_BOARD_CONFIG +#define CONFIG_KEYBOARD_COL2_INVERTED +#define CONFIG_KEYBOARD_PROTOCOL_8042 +#define CONFIG_KEYBOARD_KEYPAD +#define CONFIG_KEYBOARD_SCANCODE_MUTABLE +#define CONFIG_LED_COMMON +#define CONFIG_LID_SWITCH +#define CONFIG_LOW_POWER_IDLE +#define CONFIG_LTO +#define CONFIG_CHIP_PANIC_BACKUP +#define CONFIG_PWM +#define CONFIG_SOFTWARE_PANIC +#define CONFIG_SPI_FLASH_REGS +#define CONFIG_SPI_FLASH_W25X40 +#define CONFIG_VBOOT_HASH +#define CONFIG_SHA256_UNROLLED +#define CONFIG_VOLUME_BUTTONS +#define CONFIG_VSTORE +#define CONFIG_VSTORE_SLOT_COUNT 1 +#define CONFIG_WATCHDOG_HELP +#define CONFIG_WIRELESS +#define CONFIG_WIRELESS_SUSPEND \ + (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) +#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN +#undef CONFIG_SUPPORT_CHIP_HIBERNATION +#define CONFIG_FANS 1 +#undef CONFIG_FAN_INIT_SPEED +#define CONFIG_FAN_INIT_SPEED 50 +#define CONFIG_THROTTLE_AP +#define CONFIG_PWM_KBLIGHT +#define CONFIG_SUPPRESSED_HOST_COMMANDS \ + EC_CMD_CONSOLE_SNAPSHOT, EC_CMD_CONSOLE_READ, EC_CMD_PD_GET_LOG_ENTRY, \ + EC_CMD_MOTION_SENSE_CMD +#define CONFIG_EC_FEATURE_BOARD_OVERRIDE + +/* Port80 */ +#undef CONFIG_PORT80_HISTORY_LEN +#define CONFIG_PORT80_HISTORY_LEN 256 + +/* SOC */ +#define CONFIG_CHIPSET_SKYLAKE +#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET +#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK +#define CONFIG_CHIPSET_RESET_HOOK +#define CONFIG_HOSTCMD_ESPI +#define CONFIG_HOSTCMD_ESPI_VW_SIGNALS +#define CONFIG_HOSTCMD_FLASH_SPI_INFO + +/* Battery */ +#define CONFIG_BATTERY_CUT_OFF +#define CONFIG_BATTERY_HW_PRESENT_CUSTOM +#define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" +#define CONFIG_BATTERY_PRESENT_CUSTOM +#define CONFIG_BATTERY_SMART +#define CONFIG_PWR_STATE_DISCHARGE_FULL +#define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD +#undef CONFIG_BATT_HOST_FULL_FACTOR +#define CONFIG_BATT_HOST_FULL_FACTOR 100 + +/* Charger */ +#define CONFIG_CHARGE_MANAGER +#define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */ +#define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT +#define CONFIG_CHARGER +#define CONFIG_CHARGER_V2 +#define CONFIG_CHARGER_ISL9238 +#define CONFIG_CHARGER_DISCHARGE_ON_AC +#define CONFIG_CHARGER_INPUT_CURRENT 512 +/* EC's thresholds. 3%: boot, 2%: no boot. Required for soft sync. */ +#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 3 +#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON_WITH_AC 1 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 27000 +#define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 +/* AP's thresholds. */ +#define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 3 +#define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 27000 +#define CONFIG_CHARGER_PROFILE_OVERRIDE +#define CONFIG_CHARGER_PSYS +#define CONFIG_CHARGER_SENSE_RESISTOR 10 +#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 +#define CONFIG_CMD_CHARGER_ADC_AMON_BMON +#define CONFIG_CMD_PD_CONTROL +#define CONFIG_EXTPOWER_GPIO +#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 +#define CONFIG_POWER_BUTTON +#define CONFIG_POWER_BUTTON_X86 +#undef CONFIG_POWER_BUTTON_INIT_TIMEOUT +#define CONFIG_POWER_BUTTON_INIT_TIMEOUT 6 +#define CONFIG_POWER_COMMON +#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 +#define CONFIG_POWER_S0IX +#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE + +/* Sensor */ + +#define CONFIG_MKBP_EVENT +#define CONFIG_MKBP_USE_HOST_EVENT +#define CONFIG_LID_ANGLE +#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL +#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL +#define CONFIG_LID_ANGLE_UPDATE +#define CONFIG_LID_ANGLE_TABLET_MODE +#define CONFIG_LID_ANGLE_INVALID_CHECK +#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT + +/* KB backlight driver */ +#define CONFIG_LED_DRIVER_LM3509 + +#undef CONFIG_SENSOR_TIGHT_TIMESTAMPS + +/* FIFO size is in power of 2. */ +#define CONFIG_ACCEL_FIFO 512 + +/* Depends on how fast the AP boots and typical ODRs */ +#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO / 3) + +#define CONFIG_TABLET_MODE +#define CONFIG_TABLET_MODE_SWITCH +#define CONFIG_TABLET_SWITCH +#define TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L + +/* USB */ +#define CONFIG_USB_CHARGER +#define CONFIG_USB_PD_ALT_MODE +#define CONFIG_USB_PD_ALT_MODE_DFP +#define CONFIG_USB_PD_COMM_LOCKED +#define CONFIG_USB_PD_DISCHARGE_TCPC +#define CONFIG_USB_PD_DUAL_ROLE +#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE +#define CONFIG_USB_PD_LOGGING +#define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 +#define CONFIG_USB_PD_PORT_COUNT 2 +#define CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT 4500 +#define CONFIG_USB_PD_VBUS_DETECT_GPIO +#define CONFIG_USB_PD_TCPC_LOW_POWER +#define CONFIG_USB_PD_TCPM_MUX +#define CONFIG_USB_PD_TCPM_TCPCI +#define CONFIG_USB_PD_TCPM_ANX7447 +#define CONFIG_USB_PD_TCPM_ANX7447_OCM_ERASE_COMMAND +#define CONFIG_USB_PD_TCPM_PS8751 +#define CONFIG_USB_PD_TRY_SRC +#define CONFIG_USB_POWER_DELIVERY +#define CONFIG_USBC_SS_MUX +#define CONFIG_USBC_VCONN +#define CONFIG_USBC_VCONN_SWAP + + +/* BC 1.2 charger */ +#define CONFIG_BC12_DETECT_PI3USB9281 +#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 + +/* Optional feature to configure npcx chip */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ + +/* I2C ports */ +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 +#define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT0_0 +#define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 +#define I2C_PORT_BATTERY NPCX_I2C_PORT1 +#define I2C_PORT_CHARGER NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_KBLIGHT NPCX_I2C_PORT2 +#define I2C_PORT_GYRO NPCX_I2C_PORT3 +#define I2C_PORT_ACCEL NPCX_I2C_PORT3 +#define I2C_PORT_THERMAL NPCX_I2C_PORT3 +#define I2C_PORT_ALS NPCX_I2C_PORT3 + +/* I2C addresses */ +#define I2C_ADDR_MP2949 0x40 +#define I2C_ADDR_EEPROM 0xa0 + +#ifndef __ASSEMBLER__ + +/* support factory keyboard test */ +#define CONFIG_KEYBOARD_FACTORY_TEST +extern const int keyboard_factory_scan_pins[][2]; +extern const int keyboard_factory_scan_pins_used; + +#include "gpio_signal.h" +#include "registers.h" + +enum power_signal { +#ifdef CONFIG_POWER_S0IX + X86_SLP_S0_DEASSERTED, +#endif + X86_SLP_S3_DEASSERTED, + X86_SLP_S4_DEASSERTED, + X86_SLP_SUS_DEASSERTED, + X86_RSMRST_L_PGOOD, + X86_PMIC_DPWROK, + POWER_SIGNAL_COUNT, +}; + +#define SKU_ID_MASK_KBLIGHT BIT(0) +#define SKU_ID_MASK_CONVERTIBLE BIT(9) +#define SKU_ID_MASK_KEYPAD BIT(15) +#define SKU_ID_MASK_UK2 BIT(18) + +/* TODO(crosbug.com/p/61098): Verify the numbers below. */ +/* + * delay to turn on the power supply max is ~16ms. + * delay to turn off the power supply max is about ~180ms. + */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ + +/* delay to turn on/off vconn */ +#define PD_VCONN_SWAP_DELAY 5000 /* us */ + +/* Define typical operating power and max power */ +#define PD_OPERATING_POWER_MW 15000 +#define PD_MAX_POWER_MW 70000 +#define PD_MAX_CURRENT_MA 3500 +#define PD_MAX_VOLTAGE_MV 20000 + +/* Board specific handlers */ +void board_reset_pd_mcu(void); +void board_set_tcpc_power_mode(int port, int mode); + +/* Sensors without hardware FIFO are in forced mode */ +#define CONFIG_ACCEL_FORCE_MODE_MASK ((1 << LID_ACCEL) | (1 << LID_ALS)) + +/* These should be referenced only after HOOK_INIT:HOOK_PRIO_INIT_I2C+1. */ +extern uint16_t board_version; +extern uint8_t oem; +extern uint32_t sku; +extern uint8_t model; + +/* SKU_ID[24:31] are dedicated to OEM customization */ +#define CBI_SKU_CUSTOM_FIELD(val) ((val) >> 24) + +void ccd_mode_isr(enum gpio_signal signal); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BASEBOARD_H */ |