diff options
Diffstat (limited to 'baseboard/volteer/baseboard.c')
| -rw-r--r-- | baseboard/volteer/baseboard.c | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/baseboard/volteer/baseboard.c b/baseboard/volteer/baseboard.c index 59016b7f79..1fa95af8f3 100644 --- a/baseboard/volteer/baseboard.c +++ b/baseboard/volteer/baseboard.c @@ -5,17 +5,13 @@ /* Volteer family-specific configuration */ #include "adc_chip.h" -#include "bb_retimer.h" #include "button.h" #include "cbi_ec_fw_config.h" #include "charge_manager.h" #include "charge_state.h" #include "cros_board_info.h" -#include "driver/bc12/pi3usb9201.h" #include "driver/charger/isl9241.h" #include "driver/tcpm/ps8xxx.h" -#include "driver/tcpm/tcpci.h" -#include "driver/tcpm/tusb422.h" #include "driver/temp_sensor/thermistor.h" #include "gpio.h" #include "hooks.h" @@ -26,9 +22,6 @@ #include "task.h" #include "temp_sensor.h" #include "usbc_ppc.h" -#include "usb_mux.h" -#include "usb_pd.h" -#include "usb_pd_tcpm.h" #include "util.h" #define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) @@ -72,20 +65,6 @@ const struct adc_t adc_channels[] = { BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); /******************************************************************************/ -/* BC1.2 charger detect configuration */ -const struct pi3usb9201_config_t pi3usb9201_bc12_chips[] = { - [USBC_PORT_C0] = { - .i2c_port = I2C_PORT_USB_C0, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, - [USBC_PORT_C1] = { - .i2c_port = I2C_PORT_USB_C1, - .i2c_addr_flags = PI3USB9201_I2C_ADDR_3_FLAGS, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pi3usb9201_bc12_chips) == USBC_PORT_COUNT); - -/******************************************************************************/ /* Wake up pins */ const enum gpio_signal hibernate_wake_pins[] = { GPIO_LID_OPEN, @@ -239,108 +218,6 @@ struct ec_thermal_config thermal_params[] = { BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); /******************************************************************************/ -/* USBC TCPC configuration */ -struct tcpc_config_t tcpc_config[] = { - [USBC_PORT_C0] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C0, - .addr_flags = TUSB422_I2C_ADDR_FLAGS, - }, - .drv = &tusb422_tcpm_drv, - .usb23 = USBC_PORT_0_USB2_NUM | (USBC_PORT_0_USB3_NUM << 4), - }, - [USBC_PORT_C1] = { - .bus_type = EC_BUS_TYPE_I2C, - .i2c_info = { - .port = I2C_PORT_USB_C1, - .addr_flags = TUSB422_I2C_ADDR_FLAGS, - }, - .drv = &tusb422_tcpm_drv, - .usb23 = USBC_PORT_1_USB2_NUM | (USBC_PORT_1_USB3_NUM << 4), - }, -}; -BUILD_ASSERT(ARRAY_SIZE(tcpc_config) == USBC_PORT_COUNT); -BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT); - -/******************************************************************************/ -/* USBC mux configuration - Tiger Lake includes internal mux */ -struct usb_mux usbc1_usb4_db_retimer = { - .usb_port = USBC_PORT_C1, - .driver = &bb_usb_retimer, - .i2c_port = I2C_PORT_USB_1_MIX, - .i2c_addr_flags = USBC_PORT_C1_BB_RETIMER_I2C_ADDR, -}; -struct usb_mux usb_muxes[] = { - [USBC_PORT_C0] = { - .usb_port = USBC_PORT_C0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, - }, - [USBC_PORT_C1] = { - .usb_port = USBC_PORT_C1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, - .next_mux = &usbc1_usb4_db_retimer, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); - -struct bb_usb_control bb_controls[] = { - [USBC_PORT_C0] = { - /* USB-C port 0 doesn't have a retimer */ - }, - [USBC_PORT_C1] = { - .usb_ls_en_gpio = GPIO_USB_C1_LS_EN, - .retimer_rst_gpio = GPIO_USB_C1_RT_RST_ODL, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(bb_controls) == USBC_PORT_COUNT); - -static void baseboard_tcpc_init(void) -{ - /* Don't reset TCPCs after initial reset */ - if (!system_jumped_late()) - board_reset_pd_mcu(); - - /* Enable PPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_PPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_PPC_INT_ODL); - - /* Enable TCPC interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_TCPC_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_TCPC_INT_ODL); - - /* Enable BC1.2 interrupts. */ - gpio_enable_interrupt(GPIO_USB_C0_BC12_INT_ODL); - gpio_enable_interrupt(GPIO_USB_C1_BC12_INT_ODL); -} -DECLARE_HOOK(HOOK_INIT, baseboard_tcpc_init, HOOK_PRIO_INIT_CHIPSET); - -/******************************************************************************/ -/* TCPC support routines */ -uint16_t tcpc_get_alert_status(void) -{ - uint16_t status = 0; - - /* - * Check which port has the ALERT line set - */ - if (!gpio_get_level(GPIO_USB_C0_TCPC_INT_ODL)) - status |= PD_STATUS_TCPC_ALERT_0; - if (!gpio_get_level(GPIO_USB_C1_TCPC_INT_ODL)) - status |= PD_STATUS_TCPC_ALERT_1; - - return status; -} - -int ppc_get_alert_status(int port) -{ - if (port == USBC_PORT_C0) - return gpio_get_level(GPIO_USB_C0_PPC_INT_ODL) == 0; - else - return gpio_get_level(GPIO_USB_C1_PPC_INT_ODL) == 0; -} void tcpc_alert_event(enum gpio_signal signal) { |