diff options
Diffstat (limited to 'baseboard')
| -rw-r--r-- | baseboard/volteer/baseboard.c | 43 |
1 files changed, 0 insertions, 43 deletions
diff --git a/baseboard/volteer/baseboard.c b/baseboard/volteer/baseboard.c index b24044e9ac..7358fbfa13 100644 --- a/baseboard/volteer/baseboard.c +++ b/baseboard/volteer/baseboard.c @@ -18,8 +18,6 @@ #include "driver/tcpm/tcpci.h" #include "driver/tcpm/tusb422.h" #include "driver/temp_sensor/thermistor.h" -#include "fan.h" -#include "fan_chip.h" #include "gpio.h" #include "hooks.h" #include "i2c.h" @@ -265,47 +263,6 @@ const struct pwm_t pwm_channels[] = { BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); /******************************************************************************/ -/* Physical fans. These are logically separate from pwm_channels. */ - -const struct fan_conf fan_conf_0 = { - .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ - .pgood_gpio = -1, - .enable_gpio = GPIO_EN_PP5000_FAN, -}; - -/* - * Fan specs from datasheet: - * Max speed 5900 rpm (+/- 7%), minimum duty cycle 30%. - * Minimum speed not specified by RPM. Set minimum RPM to max speed (with - * margin) x 30%. - * 5900 x 1.07 x 0.30 = 1894, round up to 1900 - */ -const struct fan_rpm fan_rpm_0 = { - .rpm_min = 1900, - .rpm_start = 1900, - .rpm_max = 5900, -}; - -const struct fan_t fans[FAN_CH_COUNT] = { - [FAN_CH_0] = { - .conf = &fan_conf_0, - .rpm = &fan_rpm_0, - }, -}; - -/******************************************************************************/ -/* MFT channels. These are logically separate from pwm_channels. */ -const struct mft_t mft_channels[] = { - [MFT_CH_0] = { - .module = NPCX_MFT_MODULE_1, - .clk_src = TCKC_LFCLK, - .pwm_id = PWM_CH_FAN, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); - -/******************************************************************************/ /* Temperature sensor configuration */ const struct temp_sensor_t temp_sensors[] = { [TEMP_SENSOR_1_CHARGER] = {.name = "Charger", |