diff options
Diffstat (limited to 'board/adlrvpp_mchp1727/board.h')
-rw-r--r-- | board/adlrvpp_mchp1727/board.h | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/board/adlrvpp_mchp1727/board.h b/board/adlrvpp_mchp1727/board.h deleted file mode 100644 index 50c666ece2..0000000000 --- a/board/adlrvpp_mchp1727/board.h +++ /dev/null @@ -1,158 +0,0 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Intel ADL-P-RVP-MCHP1727 board-specific configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* MCHP EC variant */ -#define VARIANT_INTELRVP_EC_MCHP - -/* UART for EC console */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 0 - -#include "adlrvp.h" - -/* - * External parallel crystal between XTAL1 and XTAL2 pins. - * #define CONFIG_CLOCK_SRC_EXTERNAL - * #define CONFIG_CLOCK_CRYSTAL - * External single ended 32KHz 50% duty cycle input clock. - * #define CONFIG_CLOCK_SRC_EXTERNAL - * #undef CONFIG_CLOCK_CRYSTAL - * Use internal silicon 32KHz oscillator - * #undef CONFIG_CLOCK_SRC_EXTERNAL - * CONFIG_CLOCK_CRYSTAL is a don't care - */ -#undef CONFIG_CLOCK_SRC_EXTERNAL - -/* MEC1727 integrated SPI chip 512KB SST25PF040C */ -#define CONFIG_SPI_FLASH_W25X40 - -/* - * Enable extra SPI flash and generic SPI - * commands via EC UART - */ -#define CONFIG_CMD_SPI_FLASH -#define CONFIG_CMD_SPI_XFER - -/* MEC172x does not apply GP-SPI controllers */ -#undef CONFIG_MCHP_GPSPI - -/* ADC channels */ -#undef ADC_TEMP_SNS_AMBIENT_CHANNEL -#undef ADC_TEMP_SNS_DDR_CHANNEL -#undef ADC_TEMP_SNS_SKIN_CHANNEL -#undef ADC_TEMP_SNS_VR_CHANNEL -#define ADC_TEMP_SNS_AMBIENT_CHANNEL CHIP_ADC_CH3 -#define ADC_TEMP_SNS_DDR_CHANNEL CHIP_ADC_CH5 -#define ADC_TEMP_SNS_SKIN_CHANNEL CHIP_ADC_CH4 -#define ADC_TEMP_SNS_VR_CHANNEL CHIP_ADC_CH0 - -/* - * ADC maximum voltage is a board level configuration. - * MEC172x ADC can use an external 3.0 or 3.3V reference with - * maximum values up to the reference voltage. - * The ADC maximum voltage depends upon the external reference - * voltage connected to MEC172x. - */ -#undef ADC_MAX_MVOLT -#define ADC_MAX_MVOLT 3300 - -/* - * Macros for GPIO signals used in common code that don't match the - * schematic names. Signal names in gpio.inc match the schematic and are - * then redefined here to so it's more clear which signal is being used for - * which purpose. - */ -/* Power sequencing */ -#define GPIO_EC_SPI_OE_N GPIO_EC_SPI_OE_MECC -#define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_ALL_SYS_PWRGD -#define GPIO_RSMRST_L_PGOOD GPIO_RSMRST_PWRGD -#define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_PWRGD -#define GPIO_PCH_SLP_S0_L GPIO_PCH_SLP_S0_N -#define GPIO_PG_EC_DSW_PWROK GPIO_VCCPDSW_3P3 -#define GPIO_SLP_SUS_L GPIO_PM_SLP_SUS_EC_N -#define GPIO_SYS_RESET_L GPIO_SYS_RST_ODL -#define GPIO_PCH_RSMRST_L GPIO_PM_RSMRST_N -#define GPIO_PCH_PWRBTN_L GPIO_PM_PWRBTN_N -#define GPIO_EN_PP3300_A GPIO_EC_DS3 -#define GPIO_SYS_PWROK_EC GPIO_SYS_PWROK -#define GPIO_PCH_DSW_PWROK GPIO_EC_DSW_PWROK - -/* Sensors */ -#define GMR_TABLET_MODE_GPIO_L GPIO_SLATE_MODE_INDICATION -#define GPIO_CPU_PROCHOT GPIO_PROCHOT_EC_N - -/* Buttons */ -#define GPIO_LID_OPEN GPIO_SMC_LID -#define GPIO_VOLUME_UP_L GPIO_VOLUME_UP -#define GPIO_VOLUME_DOWN_L GPIO_VOL_DN_EC -#define GPIO_POWER_BUTTON_L GPIO_MECH_PWR_BTN_ODL - -/* H1 */ -#define GPIO_WP_L GPIO_EC_FLASH_WP_ODL -#define GPIO_PACKET_MODE_EN GPIO_EC_H1_PACKET_MODE -#define GPIO_ENTERING_RW GPIO_EC_ENTERING_RW - -/* AC & Battery */ -#define GPIO_DC_JACK_PRESENT GPIO_STD_ADP_PRSNT -#define GPIO_AC_PRESENT GPIO_BC_ACOK -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BAT_DET - -/* eSPI/Host communication */ -#define GPIO_ESPI_RESET_L GPIO_LPC_ESPI_RST_N -#define GPIO_PCH_WAKE_L GPIO_SMC_WAKE_SCI_N_MECC -#define GPIO_EC_INT_L GPIO_EC_PCH_MKBP_INT_ODL - -/* LED */ -#define GPIO_BAT_LED_RED_L GPIO_LED_1_L -#define GPIO_PWR_LED_WHITE_L GPIO_LED_2_L - -/* FAN */ -#define GPIO_FAN_POWER_EN GPIO_THERM_SEN_MECC - -/* Charger */ -#define I2C_PORT_CHARGER MCHP_I2C_PORT0 - -/* Battery */ -#define I2C_PORT_BATTERY MCHP_I2C_PORT0 - -/* Board ID */ -#define I2C_PORT_PCA9555_BOARD_ID_GPIO MCHP_I2C_PORT0 - -/* Port 80 */ -#define I2C_PORT_PORT80 MCHP_I2C_PORT0 - -/* USB-C I2C */ -#define I2C_PORT_TYPEC_0 MCHP_I2C_PORT6 -/* - * Note: I2C for Type-C Port-1 is swapped with Type-C Port-2 - * on the RVP to reduce BOM stuffing options. - */ -#define I2C_PORT_TYPEC_1 MCHP_I2C_PORT3 -#if defined(HAS_TASK_PD_C2) -#define I2C_PORT_TYPEC_2 MCHP_I2C_PORT7 -#define I2C_PORT_TYPEC_3 MCHP_I2C_PORT2 -#endif - -#ifndef __ASSEMBLER__ - -enum adlrvp_i2c_channel { - I2C_CHAN_BATT_CHG, - I2C_CHAN_TYPEC_0, - I2C_CHAN_TYPEC_1, -#if defined(HAS_TASK_PD_C2) - I2C_CHAN_TYPEC_2, - I2C_CHAN_TYPEC_3, -#endif - I2C_CHAN_COUNT, -}; - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |