diff options
Diffstat (limited to 'board/akemi/board.c')
-rw-r--r-- | board/akemi/board.c | 107 |
1 files changed, 53 insertions, 54 deletions
diff --git a/board/akemi/board.c b/board/akemi/board.c index de5438344e..7d480b1268 100644 --- a/board/akemi/board.c +++ b/board/akemi/board.c @@ -1,4 +1,4 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. +/* Copyright 2019 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -43,8 +43,8 @@ #include "util.h" #include "battery_smart.h" -#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ## args) -#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBCHARGE, format, ##args) +#define CPRINTF(format, args...) cprintf(CC_USBCHARGE, format, ##args) /* GPIO to enable/disable the USB Type-A port. */ const int usb_port_enable[CONFIG_USB_PORT_POWER_SMART_PORT_COUNT] = { @@ -105,16 +105,16 @@ static void bc12_interrupt(enum gpio_signal signal) /******************************************************************************/ /* SPI devices */ -const struct spi_device_t spi_devices[] = { -}; +const struct spi_device_t spi_devices[] = {}; const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); /******************************************************************************/ /* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 }, - [PWM_CH_FAN] = {.channel = 5, .flags = PWM_CONFIG_OPEN_DRAIN, - .freq = 25000}, + [PWM_CH_KBLIGHT] = { .channel = 3, .flags = 0, .freq = 10000 }, + [PWM_CH_FAN] = { .channel = 5, + .flags = PWM_CONFIG_OPEN_DRAIN, + .freq = 25000 }, }; BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); @@ -140,16 +140,20 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_MAX_COUNT] = { }, }; -const struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { +const struct usb_mux_chain usb_muxes[CONFIG_USB_PD_PORT_MAX_COUNT] = { [USB_PD_PORT_TCPC_0] = { - .usb_port = USB_PD_PORT_TCPC_0, - .driver = &anx7447_usb_mux_driver, - .hpd_update = &anx7447_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .usb_port = USB_PD_PORT_TCPC_0, + .driver = &anx7447_usb_mux_driver, + .hpd_update = &anx7447_tcpc_update_hpd_status, + }, }, [USB_PD_PORT_TCPC_1] = { - .usb_port = USB_PD_PORT_TCPC_1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, + .mux = &(const struct usb_mux) { + .usb_port = USB_PD_PORT_TCPC_1, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, } }; @@ -177,17 +181,13 @@ static struct stprivate_data g_lis2dwl_data; static struct lsm6dsm_data lsm6dsm_data = LSM6DSM_DATA; /* Matrix to rotate accelrator into standard reference frame */ -static const mat33_fp_t base_standard_ref = { - { FLOAT_TO_FP(-1), 0, 0}, - { 0, FLOAT_TO_FP(1), 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t base_standard_ref = { { FLOAT_TO_FP(-1), 0, 0 }, + { 0, FLOAT_TO_FP(1), 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; -static const mat33_fp_t lid_standard_ref = { - { 0, FLOAT_TO_FP(-1), 0}, - { FLOAT_TO_FP(-1), 0, 0}, - { 0, 0, FLOAT_TO_FP(-1)} -}; +static const mat33_fp_t lid_standard_ref = { { 0, FLOAT_TO_FP(-1), 0 }, + { FLOAT_TO_FP(-1), 0, 0 }, + { 0, 0, FLOAT_TO_FP(-1) } }; struct motion_sensor_t motion_sensors[] = { [LID_ACCEL] = { @@ -267,13 +267,12 @@ struct motion_sensor_t motion_sensors[] = { }; unsigned int motion_sensor_count = ARRAY_SIZE(motion_sensors); - /******************************************************************************/ /* Physical fans. These are logically separate from pwm_channels. */ const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; @@ -292,36 +291,35 @@ const struct fan_t fans[FAN_CH_COUNT] = { /******************************************************************************/ /* MFT channels. These are logically separate from pwm_channels. */ const struct mft_t mft_channels[] = { - [MFT_CH_0] = {NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, + [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN }, }; BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); /* ADC channels */ const struct adc_t adc_channels[] = { - [ADC_TEMP_SENSOR_1] = { - "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, - [ADC_TEMP_SENSOR_2] = { - "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_TEMP_SENSOR_1] = { "TEMP_AMB", NPCX_ADC_CH0, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, + [ADC_TEMP_SENSOR_2] = { "TEMP_CHARGER", NPCX_ADC_CH1, ADC_MAX_VOLT, + ADC_READ_MAX + 1, 0 }, }; BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); const struct temp_sensor_t temp_sensors[] = { - [TEMP_SENSOR_1] = {.name = "Temp1", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_1}, - [TEMP_SENSOR_2] = {.name = "Temp2", - .type = TEMP_SENSOR_TYPE_BOARD, - .read = get_temp_3v3_51k1_47k_4050b, - .idx = ADC_TEMP_SENSOR_2}, - [TEMP_SENSOR_3] = {.name = "Temp3", - .type = TEMP_SENSOR_TYPE_CPU, - .read = g753_get_val, - .idx = 0}, + [TEMP_SENSOR_1] = { .name = "Temp1", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_1 }, + [TEMP_SENSOR_2] = { .name = "Temp2", + .type = TEMP_SENSOR_TYPE_BOARD, + .read = get_temp_3v3_51k1_47k_4050b, + .idx = ADC_TEMP_SENSOR_2 }, + [TEMP_SENSOR_3] = { .name = "Temp3", + .type = TEMP_SENSOR_TYPE_CPU, + .read = g753_get_val, + .idx = 0 }, }; BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); - /* Hatch Temperature sensors */ /* * TODO(b/124316213): These setting need to be reviewed and set appropriately @@ -331,8 +329,8 @@ BUILD_ASSERT(ARRAY_SIZE(temp_sensors) == TEMP_SENSOR_COUNT); /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_A \ - { \ +#define THERMAL_A \ + { \ .temp_host = { \ [EC_TEMP_THRESH_WARN] = 0, \ [EC_TEMP_THRESH_HIGH] = C_TO_K(75), \ @@ -391,12 +389,12 @@ __override uint32_t board_override_feature_flags0(uint32_t flags0) } /* Battery functions */ -#define SB_OPTIONALMFG_FUNCTION2 0x26 -#define QUICK_CHARGE_SUPPORT 0x01 -#define QUICK_CHARGE_ENABLE 0x02 +#define SB_OPTIONALMFG_FUNCTION2 0x26 +#define QUICK_CHARGE_SUPPORT 0x01 +#define QUICK_CHARGE_ENABLE 0x02 -#define SB_QUICK_CHARGE_ENABLE 1 -#define SB_QUICK_CHARGE_DISABLE 0 +#define SB_QUICK_CHARGE_ENABLE 1 +#define SB_QUICK_CHARGE_DISABLE 0 static void sb_quick_charge_mode(int enable) { @@ -422,7 +420,8 @@ static void board_chipset_startup(void) /* Normal charge current */ sb_quick_charge_mode(SB_QUICK_CHARGE_DISABLE); } -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_INIT_I2C+1); +DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, + HOOK_PRIO_INIT_I2C + 1); /* Called on AP S0 -> S5 transition */ static void board_chipset_shutdown(void) @@ -437,5 +436,5 @@ bool board_is_convertible(void) const uint8_t sku = get_board_sku(); return (sku == 255) || (sku == 1) || (sku == 2) || (sku == 3) || - (sku == 4); + (sku == 4); } |