diff options
Diffstat (limited to 'board/boten/board.h')
-rw-r--r-- | board/boten/board.h | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/board/boten/board.h b/board/boten/board.h new file mode 100644 index 0000000000..8452a98acf --- /dev/null +++ b/board/boten/board.h @@ -0,0 +1,123 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Waddledee board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* Select Baseboard features */ +#define VARIANT_DEDEDE_EC_IT8320 +#include "baseboard.h" + +/* System unlocked in early development */ +#define CONFIG_SYSTEM_UNLOCKED + +/* Battery */ +#define CONFIG_BATTERY_FUEL_GAUGE + +/* BC 1.2 */ +#define CONFIG_BC12_DETECT_PI3USB9201 + +/* Charger */ +#define CONFIG_CHARGER_SM5803 /* C0 and C1: Charger */ +#define CONFIG_USB_PD_VBUS_DETECT_CHARGER +#define CONFIG_USB_PD_5V_CHARGER_CTRL +#define CONFIG_CHARGER_OTG + +/* LED */ +#define CONFIG_LED_PWM_COUNT 1 + +/* Sensors */ +#define CONFIG_ACCEL_LIS2DE /* Lid accel */ +#define CONFIG_ACCELGYRO_LSM6DSM /* Base accel */ +#define CONFIG_SYNC /* Camera VSYNC */ +/* Sensors without hardware FIFO are in forced mode */ +#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL) + +#define CONFIG_ACCEL_INTERRUPTS +/* Enable sensor fifo, must also define the _SIZE and _THRES */ +#define CONFIG_ACCEL_FIFO +/* Power of 2 - Too large of a fifo causes too much timestamp jitter */ +#define CONFIG_ACCEL_FIFO_SIZE 256 +#define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) + +#define CONFIG_LID_ANGLE +#define CONFIG_LID_ANGLE_UPDATE +#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL +#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL + +#define CONFIG_SYNC_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC) + +#define CONFIG_TABLET_MODE +#define CONFIG_TABLET_MODE_SWITCH +#define CONFIG_GMR_TABLET_MODE + +/* TCPC */ +#define CONFIG_USB_PD_TCPM_ITE_ON_CHIP /* C0: ITE EC TCPC */ +#define CONFIG_USB_PD_TCPM_ANX7447 /* C1: ANX TCPC + Mux */ +#define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 1 + +/* Thermistors */ +#define CONFIG_TEMP_SENSOR +#define CONFIG_THERMISTOR +#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B +#define CONFIG_TEMP_SENSOR_POWER_GPIO GPIO_EN_PP3300_A + +/* USB Mux and Retimer */ +#define CONFIG_USB_MUX_IT5205 /* C1: ITE Mux */ +#define I2C_PORT_USB_MUX I2C_PORT_USB_C0 /* Required for ITE Mux */ + +#define CONFIG_USBC_RETIMER_TUSB544 /* C1 Redriver: TUSB544 */ + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum pwm_channel { + PWM_CH_KBLIGHT, + PWM_CH_LED_RED, + PWM_CH_LED_GREEN, + PWM_CH_LED_BLUE, + PWM_CH_COUNT, +}; + +/* Motion sensors */ +enum sensor_id { + LID_ACCEL, + BASE_ACCEL, + BASE_GYRO, + VSYNC, + SENSOR_COUNT +}; + +enum temp_sensor_id { + TEMP_SENSOR_1, + TEMP_SENSOR_2, + TEMP_SENSOR_COUNT +}; + +/* List of possible batteries */ +enum battery_type { + BATTERY_LGC15, + BATTERY_PANASONIC_AP15O5L, + BATTERY_SANYO, + BATTERY_SONY, + BATTERY_SMP_AP13J7K, + BATTERY_PANASONIC_AC15A3J, + BATTERY_LGC_AP18C8K, + BATTERY_MURATA_AP18C4K, + BATTERY_LGC_AP19A8K, + BATTERY_LGC_G023, + BATTERY_TYPE_COUNT, +}; + +int board_is_sourcing_vbus(int port); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ |