diff options
Diffstat (limited to 'board/bugzzy/board.h')
| -rw-r--r-- | board/bugzzy/board.h | 61 |
1 files changed, 37 insertions, 24 deletions
diff --git a/board/bugzzy/board.h b/board/bugzzy/board.h index 0ee270a453..6954d9d524 100644 --- a/board/bugzzy/board.h +++ b/board/bugzzy/board.h @@ -29,6 +29,7 @@ #undef CONFIG_CMD_BATTFAKE /* EC console commands */ +#define CONFIG_CMD_TCPC_DUMP #define CONFIG_CMD_CHARGER_DUMP /* Battery */ @@ -40,9 +41,12 @@ #define CONFIG_CHARGER_SENSE_RESISTOR 10 #define CONFIG_OCPC_DEF_RBATT_MOHMS 22 /* R_DS(on) 11.6mOhm + 10mOhm sns rstr */ #define CONFIG_OCPC +#define CONFIG_CHARGER_PROFILE_OVERRIDE +#define CONFIG_CHARGE_RAMP_HW #undef CONFIG_CHARGER_SINGLE_CHIP #undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE #define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) +#define CONFIG_BATTERY_CHECK_CHARGE_TEMP_LIMITS /* * GPIO for C1 interrupts, for baseboard use @@ -53,31 +57,33 @@ #define GPIO_USB_C1_INT_ODL GPIO_SUB_C1_INT_EN_RAILS_ODL /* Keyboard */ -#define CONFIG_PWM_KBLIGHT /* LED */ -#define CONFIG_LED_PWM -#define CONFIG_LED_PWM_COUNT 1 -#undef CONFIG_LED_PWM_NEAR_FULL_COLOR -#undef CONFIG_LED_PWM_SOC_ON_COLOR -#undef CONFIG_LED_PWM_SOC_SUSPEND_COLOR -#undef CONFIG_LED_PWM_LOW_BATT_COLOR -#define CONFIG_LED_PWM_NEAR_FULL_COLOR EC_LED_COLOR_WHITE -#define CONFIG_LED_PWM_SOC_ON_COLOR EC_LED_COLOR_WHITE -#define CONFIG_LED_PWM_SOC_SUSPEND_COLOR EC_LED_COLOR_WHITE -#define CONFIG_LED_PWM_LOW_BATT_COLOR EC_LED_COLOR_AMBER +#define CONFIG_LED_COMMON +#define CONFIG_LED_ONOFF_STATES +#define GPIO_BAT_LED_RED_L GPIO_LED_R_ODL +#define GPIO_BAT_LED_GREEN_L GPIO_LED_G_ODL +#define GPIO_PWR_LED_BLUE_L GPIO_LED_B_ODL + /* PWM */ -#define CONFIG_PWM -#define NPCX7_PWM1_SEL 1 /* GPIO C2 is used as PWM1. */ +#define NPCX7_PWM1_SEL 0 /* GPIO C2 is not used as PWM1. */ + +/* Thermistors */ +#define CONFIG_TEMP_SENSOR +#define CONFIG_THERMISTOR +#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B /* USB */ #define CONFIG_BC12_DETECT_PI3USB9201 -#define CONFIG_USBC_RETIMER_NB7V904M +#define CONFIG_USB_MUX_PS8743 /* USB PD */ #define CONFIG_USB_PD_PORT_MAX_COUNT 2 #define CONFIG_USB_PD_TCPM_RAA489000 +#undef CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE +#define CONFIG_USB_PD_TCPC_LPM_EXIT_DEBOUNCE (100 * MSEC) +#define CONFIG_USB_PD_COMM_LOCKED /* USB defines specific to external TCPCs */ #define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE @@ -97,7 +103,6 @@ #undef CONFIG_USBC_VCONN_SWAP_DELAY_US #define CONFIG_USBC_VCONN_SWAP_DELAY_US 787 /* us */ - /* I2C configuration */ #define I2C_PORT_EEPROM NPCX_I2C_PORT7_0 #define I2C_PORT_BATTERY NPCX_I2C_PORT5_0 @@ -125,7 +130,6 @@ #define CONFIG_CMD_ACCELS #define CONFIG_CMD_ACCEL_INFO -#define CONFIG_ACCEL_BMA255 /* Lid accel */ #define CONFIG_ACCELGYRO_BMI160 /* Base accel */ /* Lid operates in forced mode, base in FIFO */ @@ -147,6 +151,11 @@ #define CONFIG_TABLET_MODE_SWITCH #define CONFIG_GMR_TABLET_MODE +/* LIS2DS Lid accel */ +#define CONFIG_ACCEL_LIS2DS +#define CONFIG_ACCEL_LIS2DS_INT_EVENT \ + TASK_EVENT_MOTION_SENSOR_INTERRUPT(LID_ACCEL) + #ifndef __ASSEMBLER__ #include "gpio_signal.h" @@ -158,9 +167,19 @@ enum chg_id { CHARGER_NUM, }; +enum temp_sensor_id { + TEMP_SENSOR_1, + TEMP_SENSOR_2, + TEMP_SENSOR_3, + TEMP_SENSOR_4, + TEMP_SENSOR_COUNT +}; + enum adc_channel { ADC_TEMP_SENSOR_1, /* ADC0 */ ADC_TEMP_SENSOR_2, /* ADC1 */ + ADC_TEMP_SENSOR_3, /* ADC5 */ + ADC_TEMP_SENSOR_4, /* ADC6 */ ADC_SUB_ANALOG, /* ADC2 */ ADC_VSNS_PP3300_A, /* ADC9 */ ADC_CH_COUNT @@ -173,18 +192,12 @@ enum sensor_id { SENSOR_COUNT }; -enum pwm_channel { - PWM_CH_KBLIGHT, - PWM_CH_LED1_AMBER, - PWM_CH_LED2_WHITE, - PWM_CH_COUNT, -}; - /* List of possible batteries */ enum battery_type { - BATTERY_POWER_TECH, + BATTERY_SDI, BATTERY_TYPE_COUNT, }; +void panel_power_change_interrupt(enum gpio_signal signal); #endif /* !__ASSEMBLER__ */ #endif /* __CROS_EC_BOARD_H */ |