diff options
Diffstat (limited to 'board/careena/board.c')
-rw-r--r-- | board/careena/board.c | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/board/careena/board.c b/board/careena/board.c deleted file mode 100644 index ea2a886c03..0000000000 --- a/board/careena/board.c +++ /dev/null @@ -1,117 +0,0 @@ -/* Copyright 2018 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Careena board-specific configuration */ - -#include "button.h" -#include "driver/tcpm/ps8xxx.h" -#include "extpower.h" -#include "hooks.h" -#include "i2c.h" -#include "lid_switch.h" -#include "power.h" -#include "power_button.h" -#include "pwm.h" -#include "pwm_chip.h" -#include "switch.h" -#include "thermal.h" - -#include "gpio_list.h" - -const enum gpio_signal hibernate_wake_pins[] = { - GPIO_LID_OPEN, - GPIO_AC_PRESENT, - GPIO_POWER_BUTTON_L, - GPIO_EC_RST_ODL, -}; -const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); - -/* I2C port map. */ -const struct i2c_port_t i2c_ports[] = { - {"power", I2C_PORT_POWER, 100, GPIO_I2C0_SCL, GPIO_I2C0_SDA}, - {"tcpc0", I2C_PORT_TCPC0, 400, GPIO_I2C1_SCL, GPIO_I2C1_SDA}, - {"tcpc1", I2C_PORT_TCPC1, 400, GPIO_I2C2_SCL, GPIO_I2C2_SDA}, - {"thermal", I2C_PORT_THERMAL_AP, 400, GPIO_I2C3_SCL, GPIO_I2C3_SDA}, - {"sensor", I2C_PORT_SENSOR, 400, GPIO_I2C7_SCL, GPIO_I2C7_SDA}, -}; -const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); - -/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ -const struct pwm_t pwm_channels[] = { - [PWM_CH_KBLIGHT] = { - .channel = 5, - .flags = PWM_CONFIG_DSLEEP, - .freq = 100, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); - -struct ec_thermal_config thermal_params[TEMP_SENSOR_COUNT] = { - [TEMP_SENSOR_SOC] = { - .temp_host = { - [EC_TEMP_THRESH_WARN] = 0, - [EC_TEMP_THRESH_HIGH] = C_TO_K(74), - [EC_TEMP_THRESH_HALT] = C_TO_K(79), - }, - .temp_host_release = { - [EC_TEMP_THRESH_WARN] = 0, - [EC_TEMP_THRESH_HIGH] = C_TO_K(71), - [EC_TEMP_THRESH_HALT] = 0, - }, - }, -}; -BUILD_ASSERT(ARRAY_SIZE(thermal_params) == TEMP_SENSOR_COUNT); - -static void board_init(void) -{ - /* - * Ensure PROCHOT is deasserted after sysjump. - * The GPIO was an input in old RO images. On sysjump to new RW, the - * direction is changed to output but the level is not set, which - * results in the output driving low, which asserts PROCHOT incorrectly. - * (crbug.com/1226694) - */ - gpio_set_level(GPIO_CPU_PROCHOT, 1); -} -DECLARE_HOOK(HOOK_INIT, board_init, HOOK_PRIO_DEFAULT); - -#ifdef CONFIG_KEYBOARD_FACTORY_TEST -/* - * We have total 24 pins for keyboard connecter, {-1, -1} mean - * the N/A pin that don't consider it and reserve index 0 area - * that we don't have pin 0. - */ -const int keyboard_factory_scan_pins[][2] = { - {-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6}, - {0, 7}, {1, 4}, {1, 3}, {1, 6}, {-1, -1}, - {3, 1}, {2, 0}, {1, 5}, {2, 6}, {-1, -1}, - {2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3}, - {2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1}, -}; - -const int keyboard_factory_scan_pins_used = - ARRAY_SIZE(keyboard_factory_scan_pins); - -static int board_is_support_ps8755_tcpc(void) -{ - /* - * 0: PS8751 - * 1: PS8755 - */ - return gpio_get_level(GPIO_TCPC_ID); -} - -__override uint16_t board_get_ps8xxx_product_id(int port) -{ - /* Careena variant doesn't have ps8xxx product in the port 0 */ - if (port == 0) - return 0; - - if (board_is_support_ps8755_tcpc()) - return PS8755_PRODUCT_ID; - - return PS8751_PRODUCT_ID; -} -#endif |