diff options
Diffstat (limited to 'board/chell/board.h')
| -rw-r--r-- | board/chell/board.h | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/board/chell/board.h b/board/chell/board.h deleted file mode 100644 index 7e4a7aa4d7..0000000000 --- a/board/chell/board.h +++ /dev/null @@ -1,217 +0,0 @@ -/* Copyright 2015 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Chell board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * Allow dangerous commands. - * TODO: Remove this config before production. - */ -#define CONFIG_SYSTEM_UNLOCKED - -/* Optional features */ -#define CONFIG_ADC -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_PRESENT_GPIO GPIO_BAT_PRESENT_L -#define CONFIG_BATTERY_SMART -#define CONFIG_BOARD_HAS_RTC_RESET -#define CONFIG_BOARD_VERSION_GPIO -#define CONFIG_CHARGE_MANAGER -#define CONFIG_CHARGE_RAMP_HW - -#define CONFIG_CHARGER - -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHARGER_ISL9237 -#define CONFIG_CHARGER_ILIM_PIN_DISABLED -#define CONFIG_CHARGER_INPUT_CURRENT 512 -#define CONFIG_CHARGER_MIN_BAT_PCT_FOR_POWER_ON 1 -#define CONFIG_CHARGER_PROFILE_OVERRIDE -#define CONFIG_CHARGER_SENSE_RESISTOR 10 -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 -#undef CONFIG_CMD_BATTFAKE -#define CONFIG_CMD_CHARGER_ADC_AMON_BMON - -#define CONFIG_CHIPSET_SKYLAKE -#define CONFIG_CHIPSET_RESET_HOOK -#define CONFIG_CLOCK_CRYSTAL -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_HOSTCMD_PD -#define CONFIG_HOSTCMD_PD_PANIC -#define CONFIG_I2C -#define CONFIG_I2C_MASTER -#define CONFIG_KEYBOARD_PROTOCOL_8042 -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_FACTORY_TEST -#define CONFIG_LED_COMMON -#define CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_X86 -#define CONFIG_POWER_COMMON -#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 -#define CONFIG_POWER_TRACK_HOST_SLEEP_STATE -#define CONFIG_POWER_S0IX -#define CONFIG_PWM -#define CONFIG_PWM_KBLIGHT -/* All data won't fit in data RAM. So, moving boundary slightly. */ -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE (104 * 1024) -#define CONFIG_SCI_GPIO GPIO_PCH_SCI_L -/* We're space constrained on Chell, so reduce the UART TX buffer size. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 512 -#define CONFIG_USB_CHARGER -#define CONFIG_USB_MUX_PS8740 -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_ALT_MODE -#define CONFIG_USB_PD_ALT_MODE_DFP -#define CONFIG_USB_PD_COMM_LOCKED -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_LOGGING -#define CONFIG_USB_PD_PORT_MAX_COUNT 2 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_TRY_SRC -#define CONFIG_USB_PD_VBUS_DETECT_GPIO -#define CONFIG_BC12_DETECT_PI3USB9281 -#define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 -#define CONFIG_USBC_SS_MUX -#define CONFIG_USBC_SS_MUX_DFP_ONLY -#define CONFIG_USBC_VCONN -#define CONFIG_USBC_VCONN_SWAP -#define CONFIG_VBOOT_HASH - -#define CONFIG_SPI_FLASH_PORT 1 -#define CONFIG_SPI_FLASH -#define CONFIG_FLASH_SIZE 524288 -#define CONFIG_SPI_FLASH_W25X40 - -#define CONFIG_TEMP_SENSOR -#define CONFIG_TEMP_SENSOR_BD99992GW -#define CONFIG_THERMISTOR_NCP15WB -#define CONFIG_DPTF - -/* - * Enable 1 slot of secure temporary storage to support - * suspend/resume with read/write memory training. - */ -#define CONFIG_VSTORE -#define CONFIG_VSTORE_SLOT_COUNT 1 - -#define CONFIG_WATCHDOG_HELP - -#define CONFIG_WIRELESS -#define CONFIG_WIRELESS_SUSPEND \ - (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) - -/* Wireless signals */ -#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L -#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN_EN - -/* LED signals */ -#define GPIO_BAT_LED_RED GPIO_CHARGE_LED_1 -#define GPIO_BAT_LED_GREEN GPIO_CHARGE_LED_2 - -/* I2C ports */ -#define I2C_PORT_PMIC MEC1322_I2C0_0 -#define I2C_PORT_USB_CHARGER_1 MEC1322_I2C0_1 -#define I2C_PORT_USB_MUX MEC1322_I2C0_1 -#define I2C_PORT_USB_CHARGER_2 MEC1322_I2C0_0 -#define I2C_PORT_PD_MCU MEC1322_I2C1 -#define I2C_PORT_TCPC MEC1322_I2C1 -#define I2C_PORT_BATTERY MEC1322_I2C3 -#define I2C_PORT_CHARGER MEC1322_I2C3 - -/* Thermal sensors read through PMIC ADC interface */ -#define I2C_PORT_THERMAL I2C_PORT_PMIC - -/* Modules we want to exclude */ -#undef CONFIG_CMD_ACCELSPOOF -#undef CONFIG_CMD_BATTFAKE -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_HASH -#undef CONFIG_CMD_HCDEBUG -#undef CONFIG_CMD_I2C_SCAN -#undef CONFIG_CMD_MD -#undef CONFIG_CMD_MMAPINFO -#undef CONFIG_CMD_POWERINDEBUG -#undef CONFIG_CMD_PWR_AVG -#undef CONFIG_CMD_SLEEPMASK -#undef CONFIG_CMD_SLEEPMASK_SET -#undef CONFIG_CMD_SYSLOCK -#undef CONFIG_CMD_TEMP_SENSOR -#undef CONFIG_CMD_TIMERINFO -#undef CONFIG_CONSOLE_CMDHELP -#undef CONFIG_CONSOLE_HISTORY -#undef CONFIG_EC_CMD_PD_CHIP_INFO -#undef CONFIG_CMD_I2C_XFER - -#ifndef __ASSEMBLER__ - -#include "gpio_signal.h" -#include "registers.h" - -/* ADC signal */ -enum adc_channel { - ADC_VBUS, - ADC_AMON_BMON, - ADC_PSYS, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -enum pwm_channel { - PWM_CH_KBLIGHT, - - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -enum temp_sensor_id { - TEMP_SENSOR_BATTERY, - - /* These temp sensors are only readable in S0 */ - TEMP_SENSOR_AMBIENT, - TEMP_SENSOR_CHARGER, - TEMP_SENSOR_DRAM, - TEMP_SENSOR_WIFI, - - TEMP_SENSOR_COUNT -}; - -/* TODO: determine the following board specific type-C power constants */ -/* - * delay to turn on the power supply max is ~16ms. - * delay to turn off the power supply max is about ~180ms. - */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ - -/* delay to turn on/off vconn */ -#define PD_VCONN_SWAP_DELAY 5000 /* us */ - -/* Define typical operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 - -/* Try to negotiate to 20V since i2c noise problems should be fixed. */ -#define PD_MAX_VOLTAGE_MV 20000 - -#ifdef CONFIG_KEYBOARD_FACTORY_TEST -extern const int keyboard_factory_scan_pins[][2]; -extern const int keyboard_factory_scan_pins_used; -#endif - -/* Reset PD MCU */ -void board_reset_pd_mcu(void); - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |