diff options
Diffstat (limited to 'board/chocodile_vpdmcu/board.h')
-rw-r--r-- | board/chocodile_vpdmcu/board.h | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/board/chocodile_vpdmcu/board.h b/board/chocodile_vpdmcu/board.h deleted file mode 100644 index 552f00aa09..0000000000 --- a/board/chocodile_vpdmcu/board.h +++ /dev/null @@ -1,154 +0,0 @@ -/* Copyright 2019 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* chocodile_mcu board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* - * The console task is too big to include in both RO and RW images. Therefore, - * if the console task is defined, then only build an RW image. This can be - * useful for debugging to have a full console. Otherwise, without this task, - * a full RO and RW is built with a limited one-way output console. - */ -#ifdef HAS_TASK_CONSOLE -/* - * The flash size is only 32kB. - * No space for 2 partitions, - * put only RW at the beginning of the flash - */ -#undef CONFIG_FW_INCLUDE_RO -#undef CONFIG_RW_MEM_OFF -#define CONFIG_RW_MEM_OFF 0 -#undef CONFIG_RO_SIZE -#define CONFIG_RO_SIZE 0 -/* Fake full size if we had a RO partition */ -#undef CONFIG_RW_SIZE -#define CONFIG_RW_SIZE CONFIG_FLASH_SIZE_BYTES -#endif /* HAS_TASK_CONSOLE */ - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* the UART console is on USART1 (PA9/PA10) */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 1 - -/* Optional features */ -#undef CONFIG_USB_PD_CONSOLE_CMD -#undef CONFIG_USB_PD_HOST_CMD -#undef CONFIG_CMD_PD -#undef CONFIG_USBC_VCONN -#define CONFIG_ADC -#undef CONFIG_ADC_WATCHDOG -#define CONFIG_ADC_SAMPLE_TIME STM32_ADC_SMPR_41_5_CY -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_COMMON_GPIO_SHORTNAMES -#undef CONFIG_DEBUG_ASSERT -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_HIBERNATE -#undef CONFIG_HOSTCMD_EVENTS -#define CONFIG_HW_CRC -#undef CONFIG_LID_SWITCH -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LTO -#define CONFIG_STM_HWTIMER32 -#undef CONFIG_TASK_PROFILING -#undef CONFIG_UART_TX_BUF_SIZE -#undef CONFIG_UART_TX_DMA -#undef CONFIG_UART_RX_DMA -#define CONFIG_UART_TX_BUF_SIZE 128 -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPC -#define CONFIG_USB_PD_VBUS_DETECT_NONE -#define CONFIG_USB_PD_TCPM_STUB -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_TCPMV2 -#define CONFIG_USB_CTVPD -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_INTERNAL_COMP -#define CONFIG_VBOOT_HASH -#define CONFIG_WATCHDOG -#undef CONFIG_WATCHDOG_HELP - -#define CONFIG_USB_PID 0x5036 -#define VPD_HW_VERSION 0x0001 -#define VPD_FW_VERSION 0x0001 - -/* USB bcdDevice */ -#define USB_BCD_DEVICE 0 - -/* Charge Through Current */ -#define VPD_CT_CURRENT VPD_CT_CURRENT_3A - -/* Vbus impedance in milliohms */ -#define VPD_VBUS_IMPEDANCE 65 - -/* GND impedance in milliohms */ -#define VPD_GND_IMPEDANCE 33 - -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_POWER_MW 45000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_VOLTAGE_MV 20000 -/* - * TODO(crosbug.com/p/50519): Remove CONFIG_SYSTEM_UNLOCKED prior to building - * MP FW. - */ -#define CONFIG_SYSTEM_UNLOCKED - -#ifdef HAS_TASK_CONSOLE -#undef CONFIG_CONSOLE_HISTORY -#define CONFIG_CONSOLE_HISTORY 2 - -#else -#undef CONFIG_CONSOLE_CMDHELP -#define CONFIG_DEBUG_PRINTF -#define UARTN CONFIG_UART_CONSOLE -#define UARTN_BASE STM32_USART_BASE(CONFIG_UART_CONSOLE) -#endif /* HAS_TASK_CONSOLE */ - -/* Use PSTATE embedded in the RO image, not in its own erase block */ -#undef CONFIG_FLASH_PSTATE_BANK -#undef CONFIG_FW_PSTATE_SIZE -#define CONFIG_FW_PSTATE_SIZE 0 - -/* Include math_util for bitmask_uint64 used in pd_timers */ -#define CONFIG_MATH_UTIL - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_ADC 3 - -#include "gpio_signal.h" - -/* ADC signal */ -enum adc_channel { - ADC_VCONN_VSENSE = 0, - ADC_CC_VPDMCU, - ADC_CC_RP3A0_RD_L, - ADC_RDCONNECT_REF, - ADC_CC1_RP3A0_RD_L, - ADC_CC2_RP3A0_RD_L, - ADC_HOST_VBUS_VSENSE, - ADC_CHARGE_VBUS_VSENSE, - ADC_CC1_RPUSB_ODH, - ADC_CC2_RPUSB_ODH, - /* Number of ADC channels */ - ADC_CH_COUNT -}; - -/* 1.5A Rp */ -#define PD_SRC_VNC PD_SRC_1_5_VNC_MV -#define PD_SRC_RD_THRESHOLD PD_SRC_1_5_RD_THRESH_MV - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |