diff options
Diffstat (limited to 'board/chronicler/board.c')
-rw-r--r-- | board/chronicler/board.c | 94 |
1 files changed, 47 insertions, 47 deletions
diff --git a/board/chronicler/board.c b/board/chronicler/board.c index 5f7f717bca..40cefc714d 100644 --- a/board/chronicler/board.c +++ b/board/chronicler/board.c @@ -1,4 +1,4 @@ -/* Copyright 2021 The Chromium OS Authors. All rights reserved. +/* Copyright 2021 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -36,22 +36,22 @@ #include "gpio_list.h" /* Must come after other header files. */ -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args) /******************************************************************************/ /* Physical fans. These are logically separate from pwm_channels. */ const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; const struct fan_rpm fan_rpm_0 = { - .rpm_min = 3000, + .rpm_min = 3000, .rpm_start = 5000, - .rpm_max = 5100, + .rpm_max = 5100, }; const struct fan_t fans[FAN_CH_COUNT] = { @@ -73,23 +73,23 @@ const struct fan_t fans[FAN_CH_COUNT] = { * TODO(b/202062363): Remove when clang is fixed. */ #define THERMAL_CONFIG_WITHOUT_FAN \ - { \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(77), \ [EC_TEMP_THRESH_HALT] = C_TO_K(80), \ }, \ .temp_host_release = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(65), \ - }, \ + }, \ } -__maybe_unused static const struct ec_thermal_config - thermal_config_without_fan = THERMAL_CONFIG_WITHOUT_FAN; +__maybe_unused static const struct ec_thermal_config thermal_config_without_fan = + THERMAL_CONFIG_WITHOUT_FAN; /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_CONFIG_WITH_FAN \ - { \ +#define THERMAL_CONFIG_WITH_FAN \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(77), \ [EC_TEMP_THRESH_HALT] = C_TO_K(80), \ @@ -120,12 +120,12 @@ struct fan_step { /* Fan control table */ static const struct fan_step fan_table0[] = { - {.on = 30, .off = 0, .rpm = 3150 }, /* Fan level 0 */ - {.on = 47, .off = 43, .rpm = 3500 }, /* Fan level 1 */ - {.on = 50, .off = 47, .rpm = 3750 }, /* Fan level 2 */ - {.on = 53, .off = 50, .rpm = 4200 }, /* Fan level 3 */ - {.on = 56, .off = 53, .rpm = 4500 }, /* Fan level 4 */ - {.on = 59, .off = 56, .rpm = 5000 }, /* Fan level 5 */ + { .on = 30, .off = 0, .rpm = 3150 }, /* Fan level 0 */ + { .on = 47, .off = 43, .rpm = 3500 }, /* Fan level 1 */ + { .on = 50, .off = 47, .rpm = 3750 }, /* Fan level 2 */ + { .on = 53, .off = 50, .rpm = 4200 }, /* Fan level 3 */ + { .on = 56, .off = 53, .rpm = 4500 }, /* Fan level 4 */ + { .on = 59, .off = 56, .rpm = 5000 }, /* Fan level 5 */ }; /* All fan tables must have the same number of levels */ @@ -148,7 +148,7 @@ int fan_percent_to_rpm(int fan, int pct) if (++cnt != FAN_AVERAGE_TIME_SEC) return fan_table[previous_level].rpm; - avg_pct = (int) avg_pct / FAN_AVERAGE_TIME_SEC; + avg_pct = (int)avg_pct / FAN_AVERAGE_TIME_SEC; /* * Compare the pct and previous pct, we have the three paths : @@ -287,8 +287,8 @@ static const struct ec_response_keybd_config main_kb = { .capabilities = KEYBD_CAP_SCRNLOCK_KEY, }; -__override const struct ec_response_keybd_config -*board_vivaldi_keybd_config(void) +__override const struct ec_response_keybd_config * +board_vivaldi_keybd_config(void) { return &main_kb; } @@ -303,15 +303,15 @@ __override const struct ec_response_keybd_config */ const int keyboard_factory_scan_pins[][2] = { - {-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6}, - {0, 7}, {1, 4}, {1, 3}, {1, 6}, {1, 7}, - {3, 1}, {2, 0}, {1, 5}, {2, 6}, {2, 7}, - {2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3}, - {2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1}, + { -1, -1 }, { 0, 5 }, { 1, 1 }, { 1, 0 }, { 0, 6 }, + { 0, 7 }, { 1, 4 }, { 1, 3 }, { 1, 6 }, { 1, 7 }, + { 3, 1 }, { 2, 0 }, { 1, 5 }, { 2, 6 }, { 2, 7 }, + { 2, 1 }, { 2, 4 }, { 2, 5 }, { 1, 2 }, { 2, 3 }, + { 2, 2 }, { 3, 0 }, { -1, -1 }, { -1, -1 }, { -1, -1 }, }; const int keyboard_factory_scan_pins_used = - ARRAY_SIZE(keyboard_factory_scan_pins); + ARRAY_SIZE(keyboard_factory_scan_pins); #endif /******************************************************************************/ @@ -322,19 +322,19 @@ static int manual_run_time = -1; #endif struct drop_step { - int run_time; /* battery run time (day) */ - int drop_volt; /* drop voltage (mV) */ + int run_time; /* battery run time (day) */ + int drop_volt; /* drop voltage (mV) */ }; /* voltage drop table */ static const struct drop_step voltage_drop_table[] = { - {.run_time = 90, .drop_volt = 13200 }, /* drop level 0 */ - {.run_time = 198, .drop_volt = 13125 }, /* drop level 1 */ - {.run_time = 305, .drop_volt = 13050 }, /* drop level 2 */ - {.run_time = 412, .drop_volt = 12975 }, /* drop level 3 */ - {.run_time = 519, .drop_volt = 12900 }, /* drop level 4 */ - {.run_time = 626, .drop_volt = 12825 }, /* drop level 5 */ - {.run_time = __INT_MAX__, .drop_volt = 12750 },/* drop level 6 */ + { .run_time = 90, .drop_volt = 13200 }, /* drop level 0 */ + { .run_time = 198, .drop_volt = 13125 }, /* drop level 1 */ + { .run_time = 305, .drop_volt = 13050 }, /* drop level 2 */ + { .run_time = 412, .drop_volt = 12975 }, /* drop level 3 */ + { .run_time = 519, .drop_volt = 12900 }, /* drop level 4 */ + { .run_time = 626, .drop_volt = 12825 }, /* drop level 5 */ + { .run_time = __INT_MAX__, .drop_volt = 12750 }, /* drop level 6 */ }; #define NUM_DROP_LEVELS ARRAY_SIZE(voltage_drop_table) @@ -346,19 +346,19 @@ static int get_battery_run_time_day(uint32_t *battery_run_time) uint8_t data[6]; /* get battery run time */ - rv = sb_read_mfgacc(PARAM_FIRMWARE_RUNTIME, - SB_ALT_MANUFACTURER_ACCESS, data, sizeof(data)); + rv = sb_read_mfgacc(PARAM_FIRMWARE_RUNTIME, SB_ALT_MANUFACTURER_ACCESS, + data, sizeof(data)); if (rv) return EC_ERROR_UNKNOWN; /* * The response is 6 bytes; the runtime in seconds is the last 4 bytes. */ - run_time = *(int32_t *) (&data[2]); + run_time = *(int32_t *)(&data[2]); #ifdef BATTERY_RUNTIME_TEST - cprints(CC_CHARGER, "run_time : 0x%08x (%d day)", - run_time, (run_time / 86400)); + cprints(CC_CHARGER, "run_time : 0x%08x (%d day)", run_time, + (run_time / 86400)); /* manual battery run time fot test */ if (manual_run_time != -1) @@ -388,8 +388,8 @@ int charger_profile_override(struct charge_state_data *curr) break; } - curr->requested_voltage = MIN(curr->requested_voltage, - voltage_drop_table[i].drop_volt); + curr->requested_voltage = + MIN(curr->requested_voltage, voltage_drop_table[i].drop_volt); #ifdef BATTERY_RUNTIME_TEST cprints(CC_CHARGER, "Charger: run time(day): %d, drop level: %d, CV: %d", @@ -399,13 +399,13 @@ int charger_profile_override(struct charge_state_data *curr) } enum ec_status charger_profile_override_get_param(uint32_t param, - uint32_t *value) + uint32_t *value) { return EC_RES_INVALID_PARAM; } enum ec_status charger_profile_override_set_param(uint32_t param, - uint32_t value) + uint32_t value) { return EC_RES_INVALID_PARAM; } @@ -427,7 +427,7 @@ DECLARE_HOOK(HOOK_INIT, battery_runtime_init, HOOK_PRIO_LAST); #ifdef BATTERY_RUNTIME_TEST /* test command */ -static int command_manual_run_time(int argc, char **argv) +static int command_manual_run_time(int argc, const char **argv) { char *e = NULL; @@ -445,10 +445,10 @@ static int command_manual_run_time(int argc, char **argv) return EC_ERROR_PARAM1; cprints(CC_CHARGER, "manual run time set to %d sec (%d day)", - manual_run_time, (manual_run_time/86400)); + manual_run_time, (manual_run_time / 86400)); return EC_SUCCESS; } DECLARE_CONSOLE_COMMAND(rt, command_manual_run_time, "<battery_run_time_sec>", - "Set manual run time for test"); + "Set manual run time for test"); #endif |