diff options
Diffstat (limited to 'board/cr50/gpio.inc')
-rw-r--r-- | board/cr50/gpio.inc | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/board/cr50/gpio.inc b/board/cr50/gpio.inc index 76d6adf0f1..2f2402aea3 100644 --- a/board/cr50/gpio.inc +++ b/board/cr50/gpio.inc @@ -69,6 +69,7 @@ * GPIO1.4 detect_tpm_rst_asserted * GPIO1.5 unwedge_i2cs_scl * GPIO1.6 monitor_i2cs_sda + * GPIO1.10 rec_lid_switch * GPIO1.11 ec_tx_cr50_rx_in * GPIO1.12 strap_a0 * GPIO1.13 strap_a1 @@ -153,6 +154,13 @@ GPIO(SPI_CS_L, PIN(0, 9), GPIO_INPUT) /* Used during *chip* factory process. */ GPIO(DIOB4, PIN(0, 10), GPIO_INPUT | GPIO_PULL_DOWN) +/* + * Used to assert lid open or recovery switch with ccd. This signal is + * guaranteed to have an external pull-up. The pin is connected to the gpio in + * board.c. If the gpio number changes, it needs to be updated in board.c. + */ +GPIO(CCD_REC_LID_SWITCH, PIN(1, 10), GPIO_ODR_HIGH | GPIO_INPUT) + /* GPIOs used for Cr50 strapping options */ GPIO(STRAP_A0, PIN(1, 12), GPIO_INPUT) GPIO(STRAP_A1, PIN(1, 13), GPIO_INPUT) |