diff options
Diffstat (limited to 'board/cranky/led.c')
| -rw-r--r-- | board/cranky/led.c | 41 |
1 files changed, 21 insertions, 20 deletions
diff --git a/board/cranky/led.c b/board/cranky/led.c index 122a7f6dda..03398326d2 100644 --- a/board/cranky/led.c +++ b/board/cranky/led.c @@ -19,17 +19,17 @@ const int supported_led_ids_count = ARRAY_SIZE(supported_led_ids); enum led_color { LED_OFF = 0, - LED_BLUE, + LED_BLUE_POWER_LED, LED_RED, - LED_ORANGE, - LED_YELLOW, - LED_GREEN, + LED_VIOLET, + LED_INDIGO, + LED_BLUE, /* Number of colors, not a color itself */ LED_COLOR_COUNT }; -/* Brightness vs. color, for {red, green} LEDs */ +/* Brightness vs. color, for {red, blue} LEDs */ static const uint8_t color_brightness[LED_COLOR_COUNT][2] = { {0, 0}, {100, 0}, @@ -47,7 +47,7 @@ static const uint8_t color_brightness[LED_COLOR_COUNT][2] = { static void set_color_battery_led(enum led_color color) { pwm_set_duty(PWM_CH_LED_RED, color_brightness[color][0]); - pwm_set_duty(PWM_CH_LED_GREEN, color_brightness[color][1]); + pwm_set_duty(PWM_CH_LED_BLUE, color_brightness[color][1]); } static void set_color_power_led(enum led_color color) @@ -60,7 +60,7 @@ void led_get_brightness_range(enum ec_led_id led_id, uint8_t *brightness_range) switch (led_id) { case EC_LED_ID_BATTERY_LED: brightness_range[EC_LED_COLOR_RED] = 100; - brightness_range[EC_LED_COLOR_GREEN] = 100; + brightness_range[EC_LED_COLOR_BLUE] = 100; break; case EC_LED_ID_POWER_LED: brightness_range[EC_LED_COLOR_BLUE] = 100; @@ -77,8 +77,8 @@ int led_set_brightness(enum ec_led_id led_id, const uint8_t *brightness) case EC_LED_ID_BATTERY_LED: pwm_set_duty(PWM_CH_LED_RED, brightness[EC_LED_COLOR_RED]); - pwm_set_duty(PWM_CH_LED_GREEN, - brightness[EC_LED_COLOR_GREEN]); + pwm_set_duty(PWM_CH_LED_BLUE, + brightness[EC_LED_COLOR_BLUE]); break; case EC_LED_ID_POWER_LED: pwm_set_duty(PWM_CH_LED_BLUE_POWER_LED, @@ -100,7 +100,7 @@ static void led_init(void) * seems to ground the pins instead of letting them float. */ pwm_enable(PWM_CH_LED_RED, 1); - pwm_enable(PWM_CH_LED_GREEN, 1); + pwm_enable(PWM_CH_LED_BLUE, 1); pwm_enable(PWM_CH_LED_BLUE_POWER_LED, 1); set_color_battery_led(LED_OFF); set_color_power_led(LED_OFF); @@ -122,14 +122,15 @@ static void power_led_tick(void) return; if (chipset_in_state(CHIPSET_STATE_ON)) { - set_color_power_led(LED_BLUE); + set_color_power_led(LED_BLUE_POWER_LED); } else if (chipset_in_state(CHIPSET_STATE_SUSPEND)) { if (!previous_state_suspend) { previous_state_suspend = 1; power_ticks = 0; } /* Flashing 1 sec on, 1 sec off */ - set_color_power_led((power_ticks % 8) < 4 ? LED_BLUE : LED_OFF); + set_color_power_led((power_ticks % 8) < 4 ? + LED_BLUE_POWER_LED : LED_OFF); return; } else { set_color_power_led(LED_OFF); @@ -152,31 +153,31 @@ static void battery_led_tick(void) if (!led_auto_control_is_enabled(EC_LED_ID_BATTERY_LED)) return; - /* If charging error, blink orange, 25% duty cycle, 4 sec period */ + /* If charging error, blink violet, 25% duty cycle, 4 sec period */ if (chstate == PWR_STATE_ERROR) { set_color_battery_led((battery_ticks % 16) < 4 ? - LED_ORANGE : LED_OFF); + LED_VIOLET : LED_OFF); return; } - /* If charge-force-idle, blink green, 50% duty cycle, 2 sec period */ + /* If charge-force-idle, blink blue, 50% duty cycle, 2 sec period */ if (chstate == PWR_STATE_IDLE && (charge_get_flags() & CHARGE_FLAG_FORCE_IDLE)) { set_color_battery_led((battery_ticks & 0x4) ? - LED_GREEN : LED_OFF); + LED_BLUE : LED_OFF); return; } - /* If the system is charging, solid orange */ + /* If the system is charging, solid violet */ if (chstate == PWR_STATE_CHARGE) { - set_color_battery_led(LED_ORANGE); + set_color_battery_led(LED_VIOLET); return; } - /* If AC connected and fully charged (or close to it), solid green */ + /* If AC connected and fully charged (or close to it), solid blue */ if (chstate == PWR_STATE_CHARGE_NEAR_FULL || chstate == PWR_STATE_IDLE) { - set_color_battery_led(LED_GREEN); + set_color_battery_led(LED_BLUE); return; } |