diff options
Diffstat (limited to 'board/delbin/power_sequence.c')
-rw-r--r-- | board/delbin/power_sequence.c | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/board/delbin/power_sequence.c b/board/delbin/power_sequence.c deleted file mode 100644 index ac244c179d..0000000000 --- a/board/delbin/power_sequence.c +++ /dev/null @@ -1,183 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* - * Volteer board-specific power sequencing - * Power sequencing is largely done by the platform automatically. - * However, if platform power sequencing is buggy or needs tuning, - * resistors can be stuffed on the board to allow the EC full control over - * the power sequencing. - */ - -#include "assert.h" -#include "chipset.h" -#include "console.h" -#include "gpio.h" -#include "hooks.h" -#include "system.h" - -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) -#define GPIO_SET_VERBOSE(signal, value) \ - gpio_set_level_verbose(CC_CHIPSET, signal, value) - -static void board_wakeup(void) -{ - CPRINTS("%s", __func__); - /* - * PP5000_USB_AG - normally enabled automatically by EN_3300_AG which - * is connected to the PSL_OUT of the Nuvoton. - * - * Assert the signal high during wakeup, deassert at hibernate - */ - GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 1); -} -DECLARE_HOOK(HOOK_INIT, board_wakeup, HOOK_PRIO_DEFAULT); - -__override void board_hibernate_late(void) -{ - CPRINTS("%s", __func__); - /* Disable PP5000_USB_AG on hibernate */ - GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 0); -} - -/* Called during S5 -> S3 transition */ -static void board_chipset_startup(void) -{ - CPRINTS("%s", __func__); - - /* - * - */ - - /* - * Power on 1.8V rail, - * tPCH06, minimum 200us from P-P3300_DSW stable to before - * VCCPRIM_1P8 starting up. - * - * The transition to S5 and S3 is gated by SLP_SUS#, which Tiger Lake - * internally delays a minimum of 95 ms from DSW_PWROK. So no delay - * needed here. - */ - GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 1); - - /* - * Power on VCCIN Aux - no delay specified, but must follow VCCPRIM_1P8 - */ - GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 1); - - /* - * Power on bypass rails - must be turned on after VCCIN aux - * - * tPCH34, maximum 50 ms from SLP_SUS# de-assertion to completion of - * primary and bypass rail, no minimum specified. - */ - GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 1); - GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 1); - - /* - * Power on VCCST - must be gated by SLP_S3#. No order with respect to - * other power signals specified. - */ - GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 1); - - /* - * Power on DDR rails - * No delay needed - SLP_S4# already guaranteed to be de-asserted. - * VDDQ must ramp after VPP (VDD1) for DDR4/LPDDR4 systems. - */ - GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 1); - GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT); - -/* Called during S3 -> S0 and S0ix -> S0 transition */ -static void board_chipset_resume(void) -{ - CPRINTS("%s", __func__); - /* - * Power on VCCSTG rail to Tiger Lake, no PG signal available - */ - GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 1); -} -DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); - - -/* Called during S0 -> S0ix transition */ -static void board_chipset_suspend(void) -{ - CPRINTS("%s", __func__); - /* Power down VCCSTG rail */ - GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); - -/* Called during S3 -> S5 transition */ -static void board_chipset_shutdown(void) -{ - CPRINTS("%s", __func__); - - /* - * S0 to G3 sequence 1 of 2 (shared between Deep Sx and non-Deep Sx) - * TigerLake Rail Net Name - * VCCSTG PP1050_STG_S0 - * DDR_VDDQ PP0600_VDDQ - * VCCST PP1050_ST_S0 - * DDR_VPP PP1800_DRAM - */ - GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); - GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 0); - GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 0); - GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 0); - - /* - * S0 to G3 sequence 2 of 2 (non-Deep Sx) - * TigerLake Name Net Name - * VCCPRIM_3P3 PP3300_A - * VCCDSW_3P3 VCCDSW_3P3 (PP3300_A) - * V5.0A PP5000_A - * VCCPRIM_1P8 PP1800_A - * VCCIN_AUX PPVAR_VCCIN_AUX - * VNN_BYPASS PPVAR_VNN_BYPASS - * V1.05A_BYPASS PP1050_A_BYPASS - */ - - /* Ice Lake shutdown already sequences first 3 rails above. */ - chipset_force_shutdown(CHIPSET_SHUTDOWN_G3); - - GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 0); - GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 0); - GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 0); - GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 0); -} -DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); - -/** - * Handle C10_GATE transitions - see VCCSTG enable logic (figure 232, page 406) - * in Tiger Lake PDG, revision 1.0. - * - * TODO: b/141322107 - This function can be promoted to common TigerLake power - * file if CPU_C10_GATE_L support provided by the platform is not sufficient. - */ -void c10_gate_change(enum gpio_signal signal) -{ - /* Pass through CPU_C10_GATE_L as enable for VCCSTG rail */ - int c10_gate_in; - int vccstg_out; - - ASSERT(signal == GPIO_CPU_C10_GATE_L); - - c10_gate_in = gpio_get_level(signal); - vccstg_out = gpio_get_level(GPIO_EN_PP1050_STG); - - if (vccstg_out == c10_gate_in) - return; - - gpio_set_level(GPIO_EN_PP1050_STG, c10_gate_in); -} - - - - - |