diff options
Diffstat (limited to 'board/driblee/battery.c')
-rw-r--r-- | board/driblee/battery.c | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/board/driblee/battery.c b/board/driblee/battery.c new file mode 100644 index 0000000000..326ac93a6b --- /dev/null +++ b/board/driblee/battery.c @@ -0,0 +1,128 @@ +/* Copyright 2021 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Battery pack vendor provided charging profile + */ +#include "battery.h" +#include "battery_fuel_gauge.h" +#include "common.h" +#include "gpio.h" +#include "util.h" + +/* + * Battery info for lalala battery types. Note that the fields + * start_charging_min/max and charging_min/max are not used for the charger. + * The effective temperature limits are given by discharging_min/max_c. + * + * Fuel Gauge (FG) parameters which are used for determining if the battery + * is connected, the appropriate ship mode (battery cutoff) command, and the + * charge/discharge FETs status. + * + * Ship mode (battery cutoff) requires 2 writes to the appropriate smart battery + * register. For some batteries, the charge/discharge FET bits are set when + * charging/discharging is active, in other types, these bits set mean that + * charging/discharging is disabled. Therefore, in addition to the mask for + * these bits, a disconnect value must be specified. Note that for TI fuel + * gauge, the charge/discharge FET status is found in Operation Status (0x54), + * but a read of Manufacturer Access (0x00) will return the lower 16 bits of + * Operation status which contains the FET status bits. + * + * The assumption for battery types supported is that the charge/discharge FET + * status can be read with a sb_read() command and therefore, only the register + * address, mask, and disconnect value need to be provided. + */ +const struct board_batt_params board_battery_info[] = { + /* LGC AP18C8K Battery Information */ + [BATTERY_LGC_AP18C8K] = { + .fuel_gauge = { + .manuf_name = "LGC KT0030G020", + .device_name = "AP18C8K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x43, + .reg_mask = 0x0001, + .disconnect_val = 0x0, + .cfet_mask = 0x0002, + .cfet_off_val = 0x0000, + }, + }, + .batt_info = { + .voltage_max = 13050, + .voltage_normal = 11250, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + /* Murata AP18C4K Battery Information */ + [BATTERY_MURATA_AP18C4K] = { + .fuel_gauge = { + .manuf_name = "Murata KT00304012", + .device_name = "AP18C4K", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x0, + .reg_mask = 0x2000, + .disconnect_val = 0x2000, + .cfet_mask = 0x4000, + .cfet_off_val = 0x4000, + }, + }, + .batt_info = { + .voltage_max = 13200, + .voltage_normal = 11400, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, + /* AP19B8M */ + [BATTERY_AP19B8M] = { + .fuel_gauge = { + .manuf_name = "LGC KT0030G024", + .ship_mode = { + .reg_addr = 0x3A, + .reg_data = { 0xC574, 0xC574 }, + }, + .fet = { + .reg_addr = 0x43, + .reg_mask = 0x0001, + .disconnect_val = 0x0, + .cfet_mask = 0x0002, + .cfet_off_val = 0x0000, + } + }, + .batt_info = { + .voltage_max = 13350, + .voltage_normal = 11610, + .voltage_min = 9000, + .precharge_current = 256, + .start_charging_min_c = 0, + .start_charging_max_c = 50, + .charging_min_c = 0, + .charging_max_c = 60, + .discharging_min_c = -20, + .discharging_max_c = 75, + }, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(board_battery_info) == BATTERY_TYPE_COUNT); + +const enum battery_type DEFAULT_BATTERY_TYPE = BATTERY_LGC_AP18C8K; |