diff options
Diffstat (limited to 'board/elemi/board.c')
-rw-r--r-- | board/elemi/board.c | 84 |
1 files changed, 45 insertions, 39 deletions
diff --git a/board/elemi/board.c b/board/elemi/board.c index 1aaf5e1d95..6b166e1206 100644 --- a/board/elemi/board.c +++ b/board/elemi/board.c @@ -1,4 +1,4 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. +/* Copyright 2020 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -42,7 +42,7 @@ #include "gpio_list.h" /* Must come after other header files. */ -#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ##args) /* Keyboard scan setting */ __override struct keyboard_scan_config keyscan_config = { @@ -72,7 +72,7 @@ union volteer_cbi_fw_config fw_config_defaults = { const struct fan_conf fan_conf_0 = { .flags = FAN_USE_RPM_MODE, - .ch = MFT_CH_0, /* Use MFT id to control fan */ + .ch = MFT_CH_0, /* Use MFT id to control fan */ .pgood_gpio = -1, .enable_gpio = GPIO_EN_PP5000_FAN, }; @@ -101,8 +101,8 @@ const struct fan_t fans[FAN_CH_COUNT] = { /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_CPU \ - { \ +#define THERMAL_CPU \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(68), \ [EC_TEMP_THRESH_HALT] = C_TO_K(70), \ @@ -118,8 +118,8 @@ __maybe_unused static const struct ec_thermal_config thermal_cpu = THERMAL_CPU; /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_CHARGER \ - { \ +#define THERMAL_CHARGER \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(78), \ [EC_TEMP_THRESH_HALT] = C_TO_K(80), \ @@ -136,8 +136,8 @@ __maybe_unused static const struct ec_thermal_config thermal_charger = /* * TODO(b/202062363): Remove when clang is fixed. */ -#define THERMAL_REGULATOR \ - { \ +#define THERMAL_REGULATOR \ + { \ .temp_host = { \ [EC_TEMP_THRESH_HIGH] = C_TO_K(68), \ [EC_TEMP_THRESH_HALT] = C_TO_K(70), \ @@ -248,8 +248,8 @@ DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, kb_backlight_disable, HOOK_PRIO_DEFAULT); __override void board_ps8xxx_tcpc_init(int port) { /* b/189587527: Set Displayport EQ loss up to 10dB */ - tcpc_addr_write(port, PS8XXX_I2C_ADDR1_P1_FLAGS, - PS8815_REG_DP_EQ_SETTING, + tcpc_addr_write( + port, PS8XXX_I2C_ADDR1_P1_FLAGS, PS8815_REG_DP_EQ_SETTING, PS8815_DPEQ_LOSS_UP_10DB << PS8815_REG_DP_EQ_COMP_SHIFT); } @@ -258,11 +258,14 @@ __override void board_ps8xxx_tcpc_init(int port) * virtual_usb_mux_driver so the AP gets notified of mux changes and updates * the TCSS configuration on state changes. */ -static const struct usb_mux usbc1_usb3_db_retimer = { - .usb_port = USBC_PORT_C1, - .driver = &tcpci_tcpm_usb_mux_driver, - .hpd_update = &ps8xxx_tcpc_update_hpd_status, - .next_mux = NULL, +static const struct usb_mux_chain usbc1_usb3_db_retimer = { + .mux = + &(const struct usb_mux){ + .usb_port = USBC_PORT_C1, + .driver = &tcpci_tcpm_usb_mux_driver, + .hpd_update = &ps8xxx_tcpc_update_hpd_status, + }, + .next = NULL, }; /******************************************************************************/ @@ -277,8 +280,7 @@ static void ps8815_reset(void) int val; gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 0); - msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, - PS8815_PWR_H_RST_H_DELAY_MS)); + msleep(GENERIC_MAX(PS8XXX_RESET_DELAY_MS, PS8815_PWR_H_RST_H_DELAY_MS)); gpio_set_level(GPIO_USB_C1_RT_RST_ODL, 1); msleep(PS8815_FW_INIT_DELAY_MS); @@ -289,16 +291,16 @@ static void ps8815_reset(void) CPRINTS("%s: patching ps8815 registers", __func__); - if (i2c_read8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS) + if (i2c_read8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == + EC_SUCCESS) CPRINTS("ps8815: reg 0x0f was %02x", val); - if (i2c_write8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, 0x31) == EC_SUCCESS) + if (i2c_write8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, + 0x31) == EC_SUCCESS) CPRINTS("ps8815: reg 0x0f set to 0x31"); - if (i2c_read8(I2C_PORT_USB_C1, - PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == EC_SUCCESS) + if (i2c_read8(I2C_PORT_USB_C1, PS8XXX_I2C_ADDR1_P2_FLAGS, 0x0f, &val) == + EC_SUCCESS) CPRINTS("ps8815: reg 0x0f now %02x", val); } @@ -308,7 +310,7 @@ void board_reset_pd_mcu(void) /* Daughterboard specific reset for port 1 */ ps8815_reset(); usb_mux_hpd_update(USBC_PORT_C1, USB_PD_MUX_HPD_LVL_DEASSERTED | - USB_PD_MUX_HPD_IRQ_DEASSERTED); + USB_PD_MUX_HPD_IRQ_DEASSERTED); } __override void board_cbi_init(void) @@ -391,17 +393,21 @@ BUILD_ASSERT(CONFIG_USB_PD_PORT_MAX_COUNT == USBC_PORT_COUNT); /******************************************************************************/ /* USBC mux configuration - Tiger Lake includes internal mux */ -const struct usb_mux usb_muxes[] = { +const struct usb_mux_chain usb_muxes[] = { [USBC_PORT_C0] = { - .usb_port = USBC_PORT_C0, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C0, + .driver = &virtual_usb_mux_driver, + .hpd_update = &virtual_hpd_update, + }, }, [USBC_PORT_C1] = { - .usb_port = USBC_PORT_C1, - .driver = &virtual_usb_mux_driver, - .hpd_update = &virtual_hpd_update, - .next_mux = &usbc1_usb3_db_retimer, + .mux = &(const struct usb_mux) { + .usb_port = USBC_PORT_C1, + .driver = &virtual_usb_mux_driver, + .hpd_update = &virtual_hpd_update, + }, + .next = &usbc1_usb3_db_retimer, }, }; BUILD_ASSERT(ARRAY_SIZE(usb_muxes) == USBC_PORT_COUNT); @@ -458,13 +464,13 @@ int ppc_get_alert_status(int port) * The connector has 24 pins total, and there is no pin 0. */ const int keyboard_factory_scan_pins[][2] = { - {-1, -1}, {0, 5}, {1, 1}, {1, 0}, {0, 6}, - {0, 7}, {1, 4}, {1, 3}, {1, 6}, {1, 7}, - {3, 1}, {2, 0}, {1, 5}, {2, 6}, {2, 7}, - {2, 1}, {2, 4}, {2, 5}, {1, 2}, {2, 3}, - {2, 2}, {3, 0}, {-1, -1}, {-1, -1}, {-1, -1}, + { -1, -1 }, { 0, 5 }, { 1, 1 }, { 1, 0 }, { 0, 6 }, + { 0, 7 }, { 1, 4 }, { 1, 3 }, { 1, 6 }, { 1, 7 }, + { 3, 1 }, { 2, 0 }, { 1, 5 }, { 2, 6 }, { 2, 7 }, + { 2, 1 }, { 2, 4 }, { 2, 5 }, { 1, 2 }, { 2, 3 }, + { 2, 2 }, { 3, 0 }, { -1, -1 }, { -1, -1 }, { -1, -1 }, }; const int keyboard_factory_scan_pins_used = - ARRAY_SIZE(keyboard_factory_scan_pins); + ARRAY_SIZE(keyboard_factory_scan_pins); #endif |