diff options
Diffstat (limited to 'board/endeavour/board.h')
| -rw-r--r-- | board/endeavour/board.h | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/board/endeavour/board.h b/board/endeavour/board.h new file mode 100644 index 0000000000..c9c54d3838 --- /dev/null +++ b/board/endeavour/board.h @@ -0,0 +1,234 @@ +/* Copyright 2019 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Endeavour board configuration */ + +#ifndef __CROS_EC_BOARD_H +#define __CROS_EC_BOARD_H + +/* + * Allow dangerous commands. + * TODO: Remove this config before production. + */ +#undef CONFIG_SYSTEM_UNLOCKED +#define CONFIG_USB_PD_COMM_LOCKED + +/* EC */ +#define CONFIG_ADC +#define CONFIG_BOARD_VERSION_CBI +#define CONFIG_BOARD_HAS_RTC_RESET +#define CONFIG_CRC8 +#define CONFIG_CEC +#define CONFIG_CROS_BOARD_INFO +#define CONFIG_DEDICATED_RECOVERY_BUTTON +#define CONFIG_EMULATED_SYSRQ +#define CONFIG_LED_COMMON +#define CONFIG_KEYBOARD_PROTOCOL_MKBP +#define CONFIG_MKBP_USE_HOST_EVENT +#define CONFIG_DPTF +#define CONFIG_FLASH_SIZE 0x80000 +#define CONFIG_FPU +#define CONFIG_I2C +#define CONFIG_I2C_MASTER +#undef CONFIG_LID_SWITCH +#define CONFIG_POWER_BUTTON_IGNORE_LID +#define CONFIG_PWM +#define CONFIG_LTO +#define CONFIG_CHIP_PANIC_BACKUP +#define CONFIG_SPI_FLASH_REGS +#define CONFIG_SPI_FLASH_W25X40 +#define CONFIG_WATCHDOG_HELP +#define CONFIG_WIRELESS +#define CONFIG_WIRELESS_SUSPEND \ + (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) +#define WIRELESS_GPIO_WLAN GPIO_WLAN_OFF_L +#define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN +#define WIRELESS_GPIO_WWAN GPIO_PP3300_DX_LTE +#define CEC_GPIO_OUT GPIO_CEC_OUT +#define CEC_GPIO_IN GPIO_CEC_IN +#define CEC_GPIO_PULL_UP GPIO_CEC_PULL_UP +#define CONFIG_FANS 1 +#define CONFIG_FAN_RPM_CUSTOM +#define CONFIG_THROTTLE_AP +#define CONFIG_CHIPSET_CAN_THROTTLE +#define CONFIG_PWM +#define CONFIG_SUPPRESSED_HOST_COMMANDS \ + EC_CMD_CONSOLE_SNAPSHOT, EC_CMD_CONSOLE_READ, EC_CMD_PD_GET_LOG_ENTRY + +/* EC console commands */ +#define CONFIG_CMD_BUTTON + +/* SOC */ +#define CONFIG_CHIPSET_SKYLAKE +#define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET +#define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK +#define CONFIG_CHIPSET_RESET_HOOK +#define CONFIG_HOSTCMD_ESPI +#define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 +#define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 + +#define CONFIG_CMD_PD_CONTROL +#define CONFIG_EXTPOWER_GPIO +#undef CONFIG_EXTPOWER_DEBOUNCE_MS +#define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 +#define CONFIG_POWER_BUTTON +#define CONFIG_POWER_BUTTON_X86 +#define CONFIG_POWER_BUTTON_INIT_IDLE +#define CONFIG_POWER_COMMON +#define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 +#define CONFIG_DELAY_DSW_PWROK_TO_PWRBTN + +/* Sensor */ +#define CONFIG_TEMP_SENSOR +#define CONFIG_TEMP_SENSOR_TMP432 + +/* USB */ +#define CONFIG_USB_PD_ALT_MODE +#define CONFIG_USB_PD_ALT_MODE_DFP +#define CONFIG_USB_PD_DISCHARGE_TCPC +#define CONFIG_USB_PD_LOGGING +#define CONFIG_USB_PD_PORT_MAX_COUNT 1 +#define CONFIG_USB_PD_VBUS_DETECT_GPIO +#define CONFIG_USB_PD_TCPM_MUX +#define CONFIG_USB_PD_TCPM_TCPCI +#define CONFIG_USB_PD_TCPM_PS8751 +#define CONFIG_USB_POWER_DELIVERY +#define CONFIG_USBC_SS_MUX +#define CONFIG_USBC_SS_MUX_DFP_ONLY +#define CONFIG_USBC_VCONN + +/* USB-A config */ +#define CONFIG_USB_PORT_POWER_DUMB +#define USB_PORT_COUNT 4 + +/* Optional feature to configure npcx chip */ +#define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ +#define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ +#define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ + +/* I2C ports */ +#define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 +#define I2C_PORT_EEPROM NPCX_I2C_PORT0_1 +#define I2C_PORT_BACKLIGHT NPCX_I2C_PORT1 +#define I2C_PORT_PMIC NPCX_I2C_PORT2 +#define I2C_PORT_THERMAL NPCX_I2C_PORT3 + +/* I2C addresses */ +#define I2C_ADDR_TCPC0_FLAGS 0x0b +#define I2C_ADDR_EEPROM_FLAGS 0x50 + +/* Verify and jump to RW image on boot */ +#define CONFIG_VBOOT_EFS +#define CONFIG_VBOOT_HASH +#define CONFIG_VSTORE +#define CONFIG_VSTORE_SLOT_COUNT 1 + +/* + * LED backlight controller + */ +#define CONFIG_LED_DRIVER_OZ554 + +/* + * Flash layout. Since config_flash_layout.h is included before board.h, + * we can only overwrite (=undef/define) these parameters here. + * + * Flash stores 3 images: RO, RW_A, RW_B. We divide the flash by 4. + * A public key is stored at the end of RO. Signatures are stored at the + * end of RW_A and RW_B, respectively. + */ +#define CONFIG_RW_B +#define CONFIG_RW_B_MEM_OFF CONFIG_RO_MEM_OFF +#undef CONFIG_RO_SIZE +#define CONFIG_RO_SIZE (CONFIG_FLASH_SIZE / 4) +#undef CONFIG_RW_SIZE +#define CONFIG_RW_SIZE CONFIG_RO_SIZE +#define CONFIG_RW_A_STORAGE_OFF CONFIG_RW_STORAGE_OFF +#define CONFIG_RW_B_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ + CONFIG_RW_SIZE) +#define CONFIG_RW_A_SIGN_STORAGE_OFF (CONFIG_RW_A_STORAGE_OFF + \ + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) +#define CONFIG_RW_B_SIGN_STORAGE_OFF (CONFIG_RW_B_STORAGE_OFF + \ + CONFIG_RW_SIZE - CONFIG_RW_SIG_SIZE) + +#define CONFIG_RWSIG +#define CONFIG_RWSIG_TYPE_RWSIG +#define CONFIG_RSA +#ifdef SECTION_IS_RO +#define CONFIG_RSA_OPTIMIZED +#endif +#define CONFIG_SHA256 +#ifdef SECTION_IS_RO +#define CONFIG_SHA256_UNROLLED +#endif +#define CONFIG_RSA_KEY_SIZE 3072 +#define CONFIG_RSA_EXPONENT_3 + +#ifndef __ASSEMBLER__ + +#include "gpio_signal.h" +#include "registers.h" + +enum charge_port { + CHARGE_PORT_TYPEC0, + CHARGE_PORT_BARRELJACK, +}; + +enum temp_sensor_id { + TEMP_SENSOR_CHARGER, /* BD99992GW SYSTHERM1 */ + TEMP_SENSOR_DRAM, /* BD99992GW SYSTHERM2 */ + TEMP_SENSOR_COUNT +}; + +enum adc_channel { + ADC_VBUS, + ADC_CH_COUNT +}; + +enum pwm_channel { + PWM_CH_LED_RED, + PWM_CH_LED_BLUE, + PWM_CH_FAN, + /* Number of PWM channels */ + PWM_CH_COUNT +}; + +enum fan_channel { + FAN_CH_0, + /* Number of FAN channels */ + FAN_CH_COUNT +}; + +enum mft_channel { + MFT_CH_0, + /* Number of MFT channels */ + MFT_CH_COUNT +}; + +enum OEM_ID { + OEM_KARMA = 7, + /* Number of OEM IDs */ + OEM_COUNT +}; + +/* TODO(crosbug.com/p/61098): Verify the numbers below. */ +/* + * delay to turn on the power supply max is ~16ms. + * delay to turn off the power supply max is about ~180ms. + */ +#define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ +#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ + +/* delay to turn on/off vconn */ +#define PD_VCONN_SWAP_DELAY 5000 /* us */ + +/* Board specific handlers */ +void board_reset_pd_mcu(void); +void board_set_tcpc_power_mode(int port, int mode); +void led_alert(int enable); +void led_critical(void); + +#endif /* !__ASSEMBLER__ */ + +#endif /* __CROS_EC_BOARD_H */ |