diff options
Diffstat (limited to 'board/fusb307bgevb/board.h')
-rw-r--r-- | board/fusb307bgevb/board.h | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/board/fusb307bgevb/board.h b/board/fusb307bgevb/board.h deleted file mode 100644 index 3495f7125f..0000000000 --- a/board/fusb307bgevb/board.h +++ /dev/null @@ -1,120 +0,0 @@ -/* Copyright 2020 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Fusb307bgevb configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Debug Congifuation */ -#define DEBUG_GET_CC -#define DEBUG_ROLE_CTRL_UPDATES - -/* Enable USART1,3,4 and USB streams */ -#define CONFIG_STREAM_USART -#define CONFIG_STREAM_USART1 -#define CONFIG_STREAM_USART4 -#define CONFIG_STREAM_USB -#define CONFIG_CMD_USART_INFO - -/* the UART console is on USART2 (PA14/PA15) */ -#undef CONFIG_UART_CONSOLE -#define CONFIG_UART_CONSOLE 2 - -/* Optional features */ -#define CONFIG_STM_HWTIMER32 -#define CONFIG_HW_CRC -#define CONFIG_I2C -#define CONFIG_I2C_CONTROLLER - -/* USB Configuration */ -#define CONFIG_USB -#define CONFIG_USB_PID 0x1234 -#define CONFIG_USB_CONSOLE - -/* USB Power Delivery configuration */ -#define CONFIG_USB_POWER_DELIVERY -#define CONFIG_USB_PD_TCPMV1 -#define CONFIG_USB_PD_PORT_MAX_COUNT 1 -#define CONFIG_USB_PD_TCPM_TCPCI -#define CONFIG_USB_PD_DUAL_ROLE -#define CONFIG_USB_PD_VBUS_DETECT_TCPC -#define CONFIG_USB_PD_REV30 -#define CONFIG_USB_PD_DECODE_SOP -#define CONFIG_USBC_VCONN -#define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE -#define CONFIG_USB_PD_TCPM_FUSB307 - -/* delay to turn on/off vconn */ -/* Define operating power and max power */ -#define PD_OPERATING_POWER_MW 15000 -#define PD_MAX_VOLTAGE_MV 20000 -#define PD_MAX_CURRENT_MA 3000 -#define PD_MAX_POWER_MW ((PD_MAX_VOLTAGE_MV * PD_MAX_CURRENT_MA) / 1000) - -/* Degine board specific type-C power constants */ -#define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ -#define PD_POWER_SUPPLY_TURN_ON_DELAY 160000 /* us */ - -/* I2C master port connected to the TCPC */ -#define I2C_PORT_TCPC 1 - -/* LCD Configuration */ -#define LCD_SLAVE_ADDR 0x27 - -/* USB interface indexes (use define rather than enum to expand them) */ -#define USB_IFACE_STREAM 0 -#define USB_IFACE_GPIO 1 -#define USB_IFACE_SPI 2 -#define USB_IFACE_CONSOLE 3 -#define USB_IFACE_COUNT 4 - -/* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_STREAM 1 -#define USB_EP_GPIO 2 -#define USB_EP_SPI 3 -#define USB_EP_CONSOLE 4 -#define USB_EP_COUNT 5 - -/* Enable control of GPIOs over USB */ -#define CONFIG_USB_GPIO - -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_LID_SWITCH - -/* - * Allow dangerous commands all the time, since we don't have a write protect - * switch. - */ -#define CONFIG_SYSTEM_UNLOCKED - -#ifndef __ASSEMBLER__ - -/* Timer selection */ -#define TIM_CLOCK32 2 - -#include "gpio_signal.h" - -/* USB string indexes */ -enum usb_strings { - USB_STR_DESC = 0, - USB_STR_VENDOR, - USB_STR_PRODUCT, - USB_STR_VERSION, - USB_STR_STREAM_NAME, - USB_STR_CONSOLE_NAME, - - USB_STR_COUNT -}; - -void board_reset_pd_mcu(void); - -#endif /* !__ASSEMBLER__ */ -#endif /* __CROS_EC_BOARD_H */ |