1 files changed, 107 insertions, 0 deletions
diff --git a/board/garg/board.h b/board/garg/board.h
new file mode 100644
index 0000000000..93f3c376da
--- /dev/null
+++ b/board/garg/board.h
@@ -0,0 +1,107 @@
+/* Copyright 2019 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ */
+
+/* Garg board configuration */
+
+#ifndef __CROS_EC_BOARD_H
+#define __CROS_EC_BOARD_H
+
+/* Select Baseboard features */
+#define VARIANT_OCTOPUS_EC_NPCX796FB
+#define VARIANT_OCTOPUS_CHARGER_ISL9238
+#include "baseboard.h"
+
+/* I2C bus configuraiton */
+#define I2C_PORT_ACCEL	I2C_PORT_SENSOR
+
+/* EC console commands  */
+#define CONFIG_CMD_ACCELS
+#define CONFIG_CMD_ACCEL_INFO
+
+#define CONFIG_LED_COMMON
+
+#define CONFIG_EC_FEATURE_BOARD_OVERRIDE
+
+/* Sensors */
+#define CONFIG_ACCEL_KX022	/* Lid accel */
+#define CONFIG_ACCELGYRO_BMI160	/* Base accel */
+#define CONFIG_SYNC		/* Camera VSYNC */
+
+#define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT
+/* Sensors without hardware FIFO are in forced mode */
+#define CONFIG_ACCEL_FORCE_MODE_MASK BIT(LID_ACCEL)
+
+/* Motion Sense Task Events */
+#define CONFIG_ACCELGYRO_BMI160_INT_EVENT \
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL)
+
+#define CONFIG_SYNC_INT_EVENT	\
+	TASK_EVENT_MOTION_SENSOR_INTERRUPT(VSYNC)
+
+#define CONFIG_LID_ANGLE
+#define CONFIG_LID_ANGLE_UPDATE
+#define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL
+#define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL
+
+#define CONFIG_VOLUME_BUTTONS
+#define GPIO_VOLUME_UP_L GPIO_EC_VOLUP_BTN_ODL
+#define GPIO_VOLUME_DOWN_L GPIO_EC_VOLDN_BTN_ODL
+
+#define CONFIG_TEMP_SENSOR
+#define CONFIG_THERMISTOR
+#define CONFIG_STEINHART_HART_3V3_13K7_47K_4050B
+#define CONFIG_STEINHART_HART_3V3_51K1_47K_4050B
+
+/* Keyboard backliht */
+#define CONFIG_PWM
+#define CONFIG_PWM_KBLIGHT
+
+#ifndef __ASSEMBLER__
+
+/* support factory keyboard test */
+#define CONFIG_KEYBOARD_FACTORY_TEST
+extern const int keyboard_factory_scan_pins[][2];
+extern const int keyboard_factory_scan_pins_used;
+
+#include "gpio_signal.h"
+#include "registers.h"
+
+enum adc_channel {
+	ADC_TEMP_SENSOR_AMB,		/* ADC0 */
+	ADC_TEMP_SENSOR_CHARGER,	/* ADC1 */
+	ADC_VBUS_C0,			/* ADC9 */
+	ADC_VBUS_C1,			/* ADC4 */
+	ADC_CH_COUNT
+};
+
+enum temp_sensor_id {
+	TEMP_SENSOR_BATTERY,
+	TEMP_SENSOR_AMBIENT,
+	TEMP_SENSOR_CHARGER,
+	TEMP_SENSOR_COUNT
+};
+
+enum pwm_channel {
+	PWM_CH_KBLIGHT,
+	PWM_CH_COUNT
+};
+
+/* Motion sensors */
+enum sensor_id {
+	LID_ACCEL,
+	BASE_ACCEL,
+	BASE_GYRO,
+	VSYNC,
+	SENSOR_COUNT
+};
+
+/* List of possible batteries */
+enum battery_type {
+	BATTERY_TYPE_COUNT,
+};
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __CROS_EC_BOARD_H */