diff options
Diffstat (limited to 'board/glados/battery.c')
| -rw-r--r-- | board/glados/battery.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/board/glados/battery.c b/board/glados/battery.c index 3365c93be1..307f977c67 100644 --- a/board/glados/battery.c +++ b/board/glados/battery.c @@ -7,6 +7,9 @@ #include "battery.h" #include "battery_smart.h" +#include "charge_state.h" +#include "console.h" +#include "ec_commands.h" #include "i2c.h" #include "util.h" @@ -52,3 +55,177 @@ int board_cut_off_battery(void) return rv; } + +#ifdef CONFIG_CHARGER_PROFILE_OVERRIDE + +static int fast_charging_allowed = 1; + +/* + * This can override the smart battery's charging profile. To make a change, + * modify one or more of requested_voltage, requested_current, or state. + * Leave everything else unchanged. + * + * Return the next poll period in usec, or zero to use the default (which is + * state dependent). + */ +int charger_profile_override(struct charge_state_data *curr) +{ + /* temp in 0.1 deg C */ + int temp_c = curr->batt.temperature - 2731; + /* keep track of last temperature range for hysteresis */ + static enum { + TEMP_RANGE_1, + TEMP_RANGE_2, + TEMP_RANGE_3, + TEMP_RANGE_4, + TEMP_RANGE_5, + } temp_range = TEMP_RANGE_3; + /* keep track of last voltage range for hysteresis */ + static enum { + VOLTAGE_RANGE_LOW, + VOLTAGE_RANGE_HIGH, + } voltage_range = VOLTAGE_RANGE_LOW; + + /* Current and previous battery voltage */ + int batt_voltage; + static int prev_batt_voltage; + + /* + * Determine temperature range. The five ranges are: + * < 10C + * 10-15C + * 15-23C + * 23-45C + * > 45C + * + * Add 0.2 degrees of hysteresis. + * If temp reading was bad, use last range. + */ + if (!(curr->batt.flags & BATT_FLAG_BAD_TEMPERATURE)) { + if (temp_c < 99) + temp_range = TEMP_RANGE_1; + else if (temp_c > 101 && temp_c < 149) + temp_range = TEMP_RANGE_2; + else if (temp_c > 151 && temp_c < 229) + temp_range = TEMP_RANGE_3; + else if (temp_c > 231 && temp_c < 449) + temp_range = TEMP_RANGE_4; + else if (temp_c > 451) + temp_range = TEMP_RANGE_5; + } + + /* + * If battery voltage reading is bad, use the last reading. Otherwise, + * determine voltage range with 20mV * hysteresis. + */ + if (curr->batt.flags & BATT_FLAG_BAD_VOLTAGE) { + batt_voltage = prev_batt_voltage; + } else { + batt_voltage = prev_batt_voltage = curr->batt.voltage; + if (batt_voltage < 8280) + voltage_range = VOLTAGE_RANGE_LOW; + else if (batt_voltage > 8300) + voltage_range = VOLTAGE_RANGE_HIGH; + } + + /* + * If we are not charging or we aren't using fast charging profiles, + * then do not override desired current and voltage. + */ + if (curr->state != ST_CHARGE || !fast_charging_allowed) + return 0; + + /* + * Okay, impose our custom will: + * When battery is 0-10C: + * CC at 486mA @ 8.7V + * CV at 8.7V + * + * When battery is <15C: + * CC at 1458mA @ 8.7V + * CV at 8.7V + * + * When battery is <23C: + * CC at 3402mA until 8.3V @ 8.7V + * CC at 2430mA @ 8.7V + * CV at 8.7V + * + * When battery is <45C: + * CC at 4860mA until 8.3V @ 8.7V + * CC at 2430mA @ 8.7V + * CV at 8.7V until current drops to 450mA + * + * When battery is >45C: + * CC at 2430mA @ 8.3V + * CV at 8.3V (when battery is hot we don't go to fully charged) + */ + switch (temp_range) { + case TEMP_RANGE_1: + curr->requested_current = 486; + curr->requested_voltage = 8700; + break; + case TEMP_RANGE_2: + curr->requested_current = 1458; + curr->requested_voltage = 8700; + break; + case TEMP_RANGE_3: + curr->requested_voltage = 8700; + if (voltage_range == VOLTAGE_RANGE_HIGH) + curr->requested_current = 2430; + else + curr->requested_current = 3402; + break; + case TEMP_RANGE_4: + curr->requested_voltage = 8700; + if (voltage_range == VOLTAGE_RANGE_HIGH) + curr->requested_current = 2430; + else + curr->requested_current = 4860; + break; + case TEMP_RANGE_5: + curr->requested_current = 2430; + curr->requested_voltage = 8300; + break; + } + + return 0; +} + +/* Customs options controllable by host command. */ +#define PARAM_FASTCHARGE (CS_PARAM_CUSTOM_PROFILE_MIN + 0) + +enum ec_status charger_profile_override_get_param(uint32_t param, + uint32_t *value) +{ + if (param == PARAM_FASTCHARGE) { + *value = fast_charging_allowed; + return EC_RES_SUCCESS; + } + return EC_RES_INVALID_PARAM; +} + +enum ec_status charger_profile_override_set_param(uint32_t param, + uint32_t value) +{ + if (param == PARAM_FASTCHARGE) { + fast_charging_allowed = value; + return EC_RES_SUCCESS; + } + return EC_RES_INVALID_PARAM; +} + +static int command_fastcharge(int argc, char **argv) +{ + if (argc > 1 && !parse_bool(argv[1], &fast_charging_allowed)) + return EC_ERROR_PARAM1; + + ccprintf("fastcharge %s\n", fast_charging_allowed ? "on" : "off"); + + return EC_SUCCESS; +} +DECLARE_CONSOLE_COMMAND(fastcharge, command_fastcharge, + "[on|off]", + "Get or set fast charging profile", + NULL); + +#endif /* CONFIG_CHARGER_PROFILE_OVERRIDE */ |