diff options
Diffstat (limited to 'board/hammer/board.h')
-rw-r--r-- | board/hammer/board.h | 102 |
1 files changed, 54 insertions, 48 deletions
diff --git a/board/hammer/board.h b/board/hammer/board.h index 768d15bc5b..bce7dc39f4 100644 --- a/board/hammer/board.h +++ b/board/hammer/board.h @@ -1,4 +1,4 @@ -/* Copyright 2016 The Chromium OS Authors. All rights reserved. +/* Copyright 2016 The ChromiumOS Authors * Use of this source code is governed by a BSD-style license that can be * found in the LICENSE file. */ @@ -46,27 +46,27 @@ /* Do not use a dedicated PSTATE bank */ #undef CONFIG_FLASH_PSTATE_BANK -#define CONFIG_SHAREDLIB_SIZE 0 +#define CONFIG_SHAREDLIB_SIZE 0 -#define CONFIG_RO_MEM_OFF 0 -#define CONFIG_RO_STORAGE_OFF 0 -#define CONFIG_RO_SIZE (44*1024) +#define CONFIG_RO_MEM_OFF 0 +#define CONFIG_RO_STORAGE_OFF 0 +#define CONFIG_RO_SIZE (44 * 1024) /* EC rollback protection block */ #define CONFIG_ROLLBACK_OFF (CONFIG_RO_MEM_OFF + CONFIG_RO_SIZE) #define CONFIG_ROLLBACK_SIZE CONFIG_FLASH_BANK_SIZE -#define CONFIG_RW_MEM_OFF (CONFIG_ROLLBACK_OFF + CONFIG_ROLLBACK_SIZE) -#define CONFIG_RW_STORAGE_OFF 0 -#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES - CONFIG_RW_MEM_OFF) +#define CONFIG_RW_MEM_OFF (CONFIG_ROLLBACK_OFF + CONFIG_ROLLBACK_SIZE) +#define CONFIG_RW_STORAGE_OFF 0 +#define CONFIG_RW_SIZE (CONFIG_FLASH_SIZE_BYTES - CONFIG_RW_MEM_OFF) -#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF -#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE -#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF -#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE +#define CONFIG_EC_PROTECTED_STORAGE_OFF CONFIG_RO_MEM_OFF +#define CONFIG_EC_PROTECTED_STORAGE_SIZE CONFIG_RO_SIZE +#define CONFIG_EC_WRITABLE_STORAGE_OFF CONFIG_RW_MEM_OFF +#define CONFIG_EC_WRITABLE_STORAGE_SIZE CONFIG_RW_SIZE -#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF -#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE +#define CONFIG_WP_STORAGE_OFF CONFIG_EC_PROTECTED_STORAGE_OFF +#define CONFIG_WP_STORAGE_SIZE CONFIG_EC_PROTECTED_STORAGE_SIZE /* The UART console is on USART1 (PA9/PA10) */ #undef CONFIG_UART_CONSOLE @@ -110,48 +110,48 @@ /* USB interface indexes (use define rather than enum to expand them) */ #ifdef SECTION_IS_RW -#define USB_IFACE_HID_KEYBOARD 0 -#define USB_IFACE_UPDATE 1 +#define USB_IFACE_HID_KEYBOARD 0 +#define USB_IFACE_UPDATE 1 #ifdef HAS_NO_TOUCHPAD -#define USB_IFACE_COUNT 2 +#define USB_IFACE_COUNT 2 #else /* !HAS_NO_TOUCHPAD */ -#define USB_IFACE_HID_TOUCHPAD 2 +#define USB_IFACE_HID_TOUCHPAD 2 /* Can be either I2C or SPI passthrough, depending on the board. */ -#define USB_IFACE_I2C_SPI 3 +#define USB_IFACE_I2C_SPI 3 #if defined(CONFIG_USB_ISOCHRONOUS) -#define USB_IFACE_ST_TOUCHPAD 4 -#define USB_IFACE_COUNT 5 -#else /* !CONFIG_USB_ISOCHRONOUS */ -#define USB_IFACE_COUNT 4 -#endif /* CONFIG_USB_ISOCHRONOUS */ +#define USB_IFACE_ST_TOUCHPAD 4 +#define USB_IFACE_COUNT 5 +#else /* !CONFIG_USB_ISOCHRONOUS */ +#define USB_IFACE_COUNT 4 +#endif /* CONFIG_USB_ISOCHRONOUS */ #endif /* !HAS_NO_TOUCHPAD */ -#else /* !SECTION_IS_RW */ -#define USB_IFACE_UPDATE 0 -#define USB_IFACE_COUNT 1 -#endif /* SECTION_IS_RW */ +#else /* !SECTION_IS_RW */ +#define USB_IFACE_UPDATE 0 +#define USB_IFACE_COUNT 1 +#endif /* SECTION_IS_RW */ /* USB endpoint indexes (use define rather than enum to expand them) */ -#define USB_EP_CONTROL 0 -#define USB_EP_UPDATE 1 +#define USB_EP_CONTROL 0 +#define USB_EP_UPDATE 1 #ifdef SECTION_IS_RW -#define USB_EP_HID_KEYBOARD 2 +#define USB_EP_HID_KEYBOARD 2 #ifdef HAS_NO_TOUCHPAD -#define USB_EP_COUNT 3 +#define USB_EP_COUNT 3 #else /* !HAS_NO_TOUCHPAD */ -#define USB_EP_HID_TOUCHPAD 3 +#define USB_EP_HID_TOUCHPAD 3 /* Can be either I2C or SPI passthrough, depending on the board. */ -#define USB_EP_I2C_SPI 4 +#define USB_EP_I2C_SPI 4 #if defined(CONFIG_USB_ISOCHRONOUS) -#define USB_EP_ST_TOUCHPAD 5 -#define USB_EP_ST_TOUCHPAD_INT 6 -#define USB_EP_COUNT 7 +#define USB_EP_ST_TOUCHPAD 5 +#define USB_EP_ST_TOUCHPAD_INT 6 +#define USB_EP_COUNT 7 #else /* !CONFIG_USB_ISOCHRONOUS */ -#define USB_EP_COUNT 5 +#define USB_EP_COUNT 5 #endif /* CONFIG_USB_ISOCHRONOUS */ #endif /* !HAS_NO_TOUCHPAD */ -#else /* !SECTION_IS_RW */ -#define USB_EP_COUNT 2 -#endif /* SECTION_IS_RW */ +#else /* !SECTION_IS_RW */ +#define USB_EP_COUNT 2 +#endif /* SECTION_IS_RW */ /* Optional features */ #define CONFIG_BOARD_PRE_INIT @@ -177,13 +177,19 @@ #undef CONFIG_USB_I2C_MAX_WRITE_COUNT #ifdef VARIANT_HAMMER_TP_LARGE_PAGE /* Zed requires 516 byte per packet for touchpad update */ -#define CONFIG_USB_I2C_MAX_WRITE_COUNT (1024 - 4) /* 4 is maximum header size */ +#define CONFIG_USB_I2C_MAX_WRITE_COUNT \ + (1024 - 4) /* 4 is maximum header size \ + */ #else -#define CONFIG_USB_I2C_MAX_WRITE_COUNT (128 - 4) /* 4 is maximum header size */ +#define CONFIG_USB_I2C_MAX_WRITE_COUNT \ + (128 - 4) /* 4 is maximum header size \ + */ #endif #undef CONFIG_USB_I2C_MAX_READ_COUNT -#define CONFIG_USB_I2C_MAX_READ_COUNT (1024 - 6) /* 6 is maximum header size */ +#define CONFIG_USB_I2C_MAX_READ_COUNT \ + (1024 - 6) /* 6 is maximum header size \ + */ #define CONFIG_I2C_XFER_LARGE_TRANSFER @@ -201,7 +207,7 @@ #define CONFIG_USB_HID_TOUCHPAD /* Virtual address for touchpad FW in USB updater. */ -#define CONFIG_TOUCHPAD_VIRTUAL_OFF 0x80000000 +#define CONFIG_TOUCHPAD_VIRTUAL_OFF 0x80000000 /* Include touchpad FW hashes in image */ #define CONFIG_TOUCHPAD_HASH_FW @@ -315,10 +321,10 @@ #endif /* Maximum current to draw. */ -#define MAX_CURRENT_MA 2000 +#define MAX_CURRENT_MA 2000 /* Maximum current/voltage to provide over OTG. */ -#define MAX_OTG_CURRENT_MA 2000 -#define MAX_OTG_VOLTAGE_MV 20000 +#define MAX_OTG_CURRENT_MA 2000 +#define MAX_OTG_VOLTAGE_MV 20000 #ifndef __ASSEMBLER__ |