1 files changed, 0 insertions, 110 deletions
diff --git a/board/hammer/variants.h b/board/hammer/variants.h
deleted file mode 100644
index d648181ab1..0000000000
--- a/board/hammer/variants.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Copyright 2019 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/*
- * Hammer variants configuration, there should be no/little BOARD_ checks
- * in the rest of the files. If this grows out of control, we can create
- * variant_*.h files.
- */
-
-#ifndef __CROS_EC_VARIANTS_H
-#define __CROS_EC_VARIANTS_H
-
-/* USB ID */
-#ifdef BOARD_HAMMER
-#define CONFIG_USB_PID 0x5022
-#elif defined(BOARD_MAGNEMITE)
-#define CONFIG_USB_PID 0x503d
-#elif defined(BOARD_MASTERBALL)
-#define CONFIG_USB_PID 0x503c
-#elif defined(BOARD_STAFF)
-#define CONFIG_USB_PID 0x502b
-#elif defined(BOARD_WAND)
-#define CONFIG_USB_PID 0x502d
-#elif defined(BOARD_WHISKERS)
-#define CONFIG_USB_PID 0x5030
-#else
-#error "Invalid board"
-#endif
-
-#ifdef SECTION_IS_RW
-
-/* Touchpad interface, firmware size and physical dimension. */
-#if defined(BOARD_HAMMER) || defined(BOARD_WAND)
-#define HAS_I2C_TOUCHPAD
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 3207
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1783
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_PRESSURE 511
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1018 /* tenth of mm */
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 566 /* tenth of mm */
-#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (48*1024)
-#elif defined(BOARD_MAGNEMITE)
-#define HAS_NO_TOUCHPAD
-#elif defined(BOARD_MASTERBALL)
-#define HAS_I2C_TOUCHPAD
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 2644
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1440
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_PRESSURE 511
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 839 /* tenth of mm */
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 457 /* tenth of mm */
-#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (64*1024)
-#elif defined(BOARD_STAFF)
-#define HAS_I2C_TOUCHPAD
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 3206
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1832
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_PRESSURE 511
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1017 /* tenth of mm */
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 581 /* tenth of mm */
-#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (56*1024)
-#elif defined(BOARD_WHISKERS)
-#define HAS_SPI_TOUCHPAD
-#define HAS_EN_PP3300_TP_ACTIVE_HIGH
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_X 2160
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_Y 1573
-#define CONFIG_USB_HID_TOUCHPAD_LOGICAL_MAX_PRESSURE 255
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_X 1030 /* tenth of mm */
-#define CONFIG_USB_HID_TOUCHPAD_PHYSICAL_MAX_Y 750 /* tenth of mm */
-#define CONFIG_TOUCHPAD_VIRTUAL_SIZE (CONFIG_UPDATE_PDU_SIZE + 128*1024)
-/* Enable to send heatmap to AP */
-#define CONFIG_USB_ISOCHRONOUS
-#else
-#error "No touchpad information for board."
-#endif
-
-/* Assistant key */
-#if defined(BOARD_HAMMER) || defined(BOARD_WAND) || defined(BOARD_WHISKERS)
-#define CONFIG_KEYBOARD_BOARD_CONFIG
-#define CONFIG_KEYBOARD_ASSISTANT_KEY
-#endif
-
-/* Backlight */
-#if defined(BOARD_HAMMER) || defined(BOARD_STAFF) || \
-    defined(BOARD_WAND) || defined(BOARD_WHISKERS)
-/*
- * Even with this option, we detect the backlight presence using a PU/PD on the
- * PWM pin. Not defining this totally disables support.
- */
-#define HAS_BACKLIGHT
-
-#ifdef BOARD_WHISKERS
-#define CONFIG_LED_DRIVER_LM3630A
-#endif
-
-#ifdef BOARD_STAFF
-#define KBLIGHT_PWM_FREQ 100 /* Hz */
-#else
-#define KBLIGHT_PWM_FREQ 50000 /* Hz */
-#endif
-
-#endif /* BOARD_HAMMER/WAND/WHISKERS */
-
-/* GMR sensor for tablet mode detection */
-#if defined(BOARD_MASTERBALL) || defined(BOARD_WHISKERS)
-#define CONFIG_GMR_TABLET_MODE
-#endif
-
-#endif /* SECTION_IS_RW */
-
-#endif /* __CROS_EC_VARIANTS_H */