diff options
Diffstat (limited to 'board/herobrine_npcx9/gpio.inc')
| -rw-r--r-- | board/herobrine_npcx9/gpio.inc | 8 |
1 files changed, 3 insertions, 5 deletions
diff --git a/board/herobrine_npcx9/gpio.inc b/board/herobrine_npcx9/gpio.inc index 187426e977..c6e1320250 100644 --- a/board/herobrine_npcx9/gpio.inc +++ b/board/herobrine_npcx9/gpio.inc @@ -29,12 +29,10 @@ GPIO_INT(PS_HOLD, PIN(A, 6), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_sig GPIO_INT(AP_SUSPEND, PIN(5, 7), GPIO_INT_BOTH, power_signal_interrupt) /* Suspend signal from PMIC */ /* * When switch-cap is off, the POWER_GOOD signal is floating. Need a pull-down - * to make it low. Overload the interrupt function chipset_warm_reset_interrupt - * for not only signalling power_signal_interrupt but also handling the logic - * of WARM_RESET_L which is pulled-up by the same rail of POWER_GOOD. + * to make it low. */ -GPIO_INT(MB_POWER_GOOD, PIN(3, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, chipset_power_good_interrupt) /* PP1800_L18B from PMIC */ -GPIO_INT(WARM_RESET_L, PIN(B, 0), GPIO_INT_BOTH, chipset_warm_reset_interrupt) /* AP warm reset */ +GPIO_INT(MB_POWER_GOOD, PIN(3, 7), GPIO_INT_BOTH | GPIO_PULL_DOWN, power_signal_interrupt) /* PP1800_L18B from PMIC */ +GPIO_INT(WARM_RESET_L, PIN(B, 0), GPIO_INT_BOTH, power_signal_interrupt) /* AP warm reset */ GPIO_INT(AP_EC_SPI_CS_L, PIN(5, 3), GPIO_INT_FALLING | GPIO_PULL_DOWN, shi_cs_event) /* EC SPI Chip Select */ /* Sensor interrupts */ |