1 files changed, 0 insertions, 53 deletions

diff --git a/board/hoho/usb_pd_policy.c b/board/hoho/usb_pd_policy.c
index c9525f2ebe..195aaacb25 100644
--- a/board/hoho/usb_pd_policy.c
+++ b/board/hoho/usb_pd_policy.c
@@ -27,65 +27,17 @@
 const uint32_t pd_src_pdo[] = {};
 const int pd_src_pdo_cnt = ARRAY_SIZE(pd_src_pdo);
 
-/* Define typical operating power and max power */
-#define OPERATING_POWER_MW 1000
-#define MAX_POWER_MW       1500
-#define MAX_CURRENT_MA     300
-
 /* Fake PDOs : we just want our pre-defined voltages */
 const uint32_t pd_snk_pdo[] = {
 		PDO_FIXED(5000, 500, PDO_FIXED_FLAGS),
 };
 const int pd_snk_pdo_cnt = ARRAY_SIZE(pd_snk_pdo);
 
-/* Desired voltage requested as a sink (in millivolts) */
-static unsigned select_mv = 5000;
-
 /* Whether alternate mode has been entered or not */
 static int alt_mode;
 /* When set true, we are in GFU mode */
 static int gfu_mode;
 
-int pd_choose_voltage(int cnt, uint32_t *src_caps, uint32_t *rdo,
-		      uint32_t *curr_limit, uint32_t *supply_voltage)
-{
-	int i;
-	int ma;
-	int set_mv = select_mv;
-	int max;
-	uint32_t flags;
-
-	/* Default to 5V */
-	if (set_mv <= 0)
-		set_mv = 5000;
-
-	/* Get the selected voltage */
-	for (i = cnt; i >= 0; i--) {
-		int mv = ((src_caps[i] >> 10) & 0x3FF) * 50;
-		int type = src_caps[i] & PDO_TYPE_MASK;
-		if ((mv == set_mv) && (type == PDO_TYPE_FIXED))
-			break;
-	}
-	if (i < 0)
-		return -EC_ERROR_UNKNOWN;
-
-	/* build rdo for desired power */
-	ma = 10 * (src_caps[i] & 0x3FF);
-	max = MIN(ma, MAX_CURRENT_MA);
-	flags = (max * set_mv) < (1000 * OPERATING_POWER_MW) ?
-			RDO_CAP_MISMATCH : 0;
-	*rdo = RDO_FIXED(i + 1, max, max, 0);
-	CPRINTF("Request [%d] %dV %dmA", i, set_mv/1000, max);
-	/* Mismatch bit set if less power offered than the operating power */
-	if (flags & RDO_CAP_MISMATCH)
-		CPRINTF(" Mismatch");
-	CPRINTF("\n");
-
-	*curr_limit = max;
-	*supply_voltage = set_mv;
-	return EC_SUCCESS;
-}
-
 void pd_set_input_current_limit(int port, uint32_t max_ma,
 				uint32_t supply_voltage)
 {
@@ -93,11 +45,6 @@ void pd_set_input_current_limit(int port, uint32_t max_ma,
 	return;
 }
 
-void pd_set_max_voltage(unsigned mv)
-{
-	select_mv = mv;
-}
-
 int pd_check_requested_voltage(uint32_t rdo)
 {
 	return EC_SUCCESS;