diff options
Diffstat (limited to 'board/hoho')
-rw-r--r-- | board/hoho/board.c | 10 | ||||
-rw-r--r-- | board/hoho/usb_pd_config.h | 6 |
2 files changed, 8 insertions, 8 deletions
diff --git a/board/hoho/board.c b/board/hoho/board.c index e6258f19b4..69ef58f59c 100644 --- a/board/hoho/board.c +++ b/board/hoho/board.c @@ -97,9 +97,9 @@ void hpd_event(enum gpio_signal signal) void board_config_pre_init(void) { /* enable SYSCFG clock */ - STM32_RCC_APB2ENR |= 1 << 0; + STM32_RCC_APB2ENR |= BIT(0); /* Remap USART DMA to match the USART driver */ - STM32_SYSCFG_CFGR1 |= (1 << 9) | (1 << 10);/* Remap USART1 RX/TX DMA */ + STM32_SYSCFG_CFGR1 |= BIT(9) | BIT(10);/* Remap USART1 RX/TX DMA */ } #ifdef CONFIG_SPI_FLASH @@ -107,7 +107,7 @@ void board_config_pre_init(void) static void board_init_spi2(void) { /* Remap SPI2 to DMA channels 6 and 7 */ - STM32_SYSCFG_CFGR1 |= (1 << 24); + STM32_SYSCFG_CFGR1 |= BIT(24); /* Set pin NSS to general purpose output mode (01b). */ /* Set pins SCK, MISO, and MOSI to alternate function (10b). */ @@ -127,8 +127,8 @@ static void board_init_spi2(void) STM32_GPIO_OSPEEDR(GPIO_B) |= 0xff000000; /* Reset SPI2 */ - STM32_RCC_APB1RSTR |= (1 << 14); - STM32_RCC_APB1RSTR &= ~(1 << 14); + STM32_RCC_APB1RSTR |= BIT(14); + STM32_RCC_APB1RSTR &= ~BIT(14); /* Enable clocks to SPI2 module */ STM32_RCC_APB1ENR |= STM32_RCC_PB1_SPI2; diff --git a/board/hoho/usb_pd_config.h b/board/hoho/usb_pd_config.h index 33e7225131..309c2200f9 100644 --- a/board/hoho/usb_pd_config.h +++ b/board/hoho/usb_pd_config.h @@ -50,7 +50,7 @@ static inline void spi_enable_clock(int port) #define TIM_TX_CCR_IDX(p) TIM_TX_CCR_C0 #define TIM_RX_CCR_IDX(p) TIM_RX_CCR_C0 #define TIM_CCR_CS 1 -#define EXTI_COMP_MASK(p) (1 << 21) +#define EXTI_COMP_MASK(p) BIT(21) #define IRQ_COMP STM32_IRQ_COMP /* triggers packet detection on comparator falling edge */ #define EXTI_XTSR STM32_EXTI_FTSR @@ -71,8 +71,8 @@ static inline void pd_set_pins_speed(int port) static inline void pd_tx_spi_reset(int port) { /* Reset SPI1 */ - STM32_RCC_APB2RSTR |= (1 << 12); - STM32_RCC_APB2RSTR &= ~(1 << 12); + STM32_RCC_APB2RSTR |= BIT(12); + STM32_RCC_APB2RSTR &= ~BIT(12); } /* Drive the CC line from the TX block */ |