diff options
Diffstat (limited to 'board/jerry/board.h')
| -rw-r--r-- | board/jerry/board.h | 108 |
1 files changed, 0 insertions, 108 deletions
diff --git a/board/jerry/board.h b/board/jerry/board.h deleted file mode 100644 index 7682268533..0000000000 --- a/board/jerry/board.h +++ /dev/null @@ -1,108 +0,0 @@ -/* Copyright 2014 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -/* Veyron board configuration */ - -#ifndef __CROS_EC_BOARD_H -#define __CROS_EC_BOARD_H - -/* Increase size of UART TX buffer. */ -#undef CONFIG_UART_TX_BUF_SIZE -#define CONFIG_UART_TX_BUF_SIZE 1024 - -/* Optional features */ -#define CONFIG_AP_HANG_DETECT -#define CONFIG_BATTERY_CUT_OFF -#define CONFIG_BATTERY_SMART -#define CONFIG_BOARD_PRE_INIT -#define CONFIG_CHARGER -#define CONFIG_CHARGER_BQ24715 -#define CONFIG_CHARGER_DISCHARGE_ON_AC -#define CONFIG_CHIPSET_RK3288 -#define CONFIG_EXTPOWER_GPIO -#define CONFIG_FORCE_CONSOLE_RESUME -#define CONFIG_HOST_COMMAND_STATUS -#define CONFIG_HOSTCMD_VBNV_CONTEXT -#define CONFIG_I2C -#define CONFIG_I2C_MASTER -#define CONFIG_I2C_VIRTUAL_BATTERY -#define CONFIG_KEYBOARD_COL2_INVERTED -#define CONFIG_KEYBOARD_PROTOCOL_MKBP -#define CONFIG_LED_COMMON -#define CONFIG_LED_POLICY_STD -#define CONFIG_LED_BAT_ACTIVE_LOW -#define CONFIG_LED_POWER_ACTIVE_LOW -#define CONFIG_LOW_POWER_IDLE -#define CONFIG_LOW_POWER_S0 -#define CONFIG_MKBP_USE_GPIO -#define CONFIG_POWER_BUTTON -#define CONFIG_POWER_BUTTON_ACTIVE_STATE 1 -#define CONFIG_POWER_COMMON -#define CONFIG_PWM -#define CONFIG_SPI -#define CONFIG_STM_HWTIMER32 -#define CONFIG_UART_RX_DMA -#define CONFIG_VBOOT_HASH - -#define CONFIG_HOSTCMD_ALIGNED - -#define CONFIG_LTO - -#undef CONFIG_CONSOLE_CMDHELP -#undef CONFIG_CONSOLE_HISTORY -#undef CONFIG_SOFTWARE_PANIC -#undef CONFIG_WATCHDOG_HELP -#undef CONFIG_CMD_KEYBOARD - -/* Not enough RO flash space */ -#undef CONFIG_HOSTCMD_GET_UPTIME_INFO - -#define CONFIG_HIBERNATE_WAKEUP_PINS (STM32_PWR_CSR_EWUP1 | STM32_PWR_CSR_EWUP6) - -#ifndef __ASSEMBLER__ - -/* 48 MHz SYSCLK clock frequency */ -#define CPU_CLOCK 48000000 - -/* Keyboard output port list */ -#define KB_OUT_PORT_LIST GPIO_A, GPIO_B, GPIO_C - -/* Single I2C port, where the EC is the master. */ -#define I2C_PORT_MASTER 0 -#define I2C_PORT_BATTERY I2C_PORT_MASTER -#define I2C_PORT_CHARGER I2C_PORT_MASTER -#define I2C_PORT_VIRTUAL_BATTERY I2C_PORT_MASTER - -/* Timer selection */ -#define TIM_CLOCK32 2 -#define TIM_WATCHDOG 4 - -#include "gpio_signal.h" - -enum power_signal { - RK_POWER_GOOD = 0, - RK_SUSPEND_ASSERTED, - /* Number of power signals */ - POWER_SIGNAL_COUNT -}; - -enum pwm_channel { - PWM_CH_POWER_LED = 0, - /* Number of PWM channels */ - PWM_CH_COUNT -}; - -/* Charger module */ -#define CONFIG_CHARGER_SENSE_RESISTOR 10 /* Charge sense resistor, mOhm */ -#define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 /* Input sensor resistor, mOhm */ -/* Input current limit for 45W AC adapter: - * 45W/19V*85%=2013mA, choose the closest charger setting = 2048mA - */ -#define CONFIG_CHARGER_INPUT_CURRENT 2048 /* mA, based on Link HW design */ -#define CONFIG_CHARGER_CURRENT_LIMIT 3000 /* PL102 inductor 3.0A(3.8A) */ - -#endif /* !__ASSEMBLER__ */ - -#endif /* __CROS_EC_BOARD_H */ |