1 files changed, 0 insertions, 126 deletions
diff --git a/board/kirby/board.h b/board/kirby/board.h
deleted file mode 100644
index 893730121c..0000000000
--- a/board/kirby/board.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-/* Kirby board configuration */
-
-#ifndef __BOARD_H
-#define __BOARD_H
-
-/* Optional features */
-#define CONFIG_BATTERY_BQ27541
-#define CONFIG_CHARGER
-#define CONFIG_CHARGER_BQ24192
-#define CONFIG_CHARGER_EN_GPIO
-#define CONFIG_CHARGER_EN_ACTIVE_LOW
-#define CONFIG_ADC
-#define CONFIG_ADC_CLOCK
-#define CONFIG_CHIPSET_GAIA
-#undef CONFIG_CHIPSET_HAS_PP1350
-#undef CONFIG_CHIPSET_HAS_PP5000
-#define CONFIG_EXTPOWER_KIRBY
-#define CONFIG_HOST_COMMAND_STATUS
-#define CONFIG_I2C
-#define CONFIG_KEYBOARD_PROTOCOL_MKBP
-#define CONFIG_SPI
-#define CONFIG_PWM
-#define CONFIG_USB_SWITCH_TSU6721
-
-#ifndef __ASSEMBLER__
-
-/* Keyboard output port list */
-#define KB_OUT_PORT_LIST GPIO_D
-
-/* Single I2C port, where the EC is the master. */
-#define I2C_PORT_MASTER 0
-#define I2C_PORT_BATTERY I2C_PORT_MASTER
-#define I2C_PORT_CHARGER I2C_PORT_MASTER
-
-/* Timer selection */
-#define TIM_CLOCK_MSB 2
-#define TIM_CLOCK_LSB 9
-#define TIM_WATCHDOG  4
-
-/* PWM signal */
-enum pwm_channel {
-	/* Y, G, R charging LEDs */
-	PWM_CH_CHG_Y = 0,
-	PWM_CH_CHG_G,
-	PWM_CH_CHG_R,
-
-	/* Number of PWM channels */
-	PWM_CH_COUNT
-};
-
-/* ADC signals */
-enum adc_channel {
-	ADC_CH_USB_VBUS_SNS = 0,
-	ADC_CH_USB_DP_SNS,
-	ADC_CH_USB_DN_SNS,
-	/* Number of ADC channels */
-	ADC_CH_COUNT
-};
-
-/* GPIO signal list */
-enum gpio_signal {
-	/* Inputs with interrupt handlers are first for efficiency */
-	GPIO_KB_PWR_ON_L = 0,
-	GPIO_SOC1V8_XPSHOLD,
-	GPIO_CHARGER_INT_L,
-	GPIO_USB_CHG_INT,
-	GPIO_USBPD_INT_L,
-	GPIO_LID_OPEN,
-	GPIO_SUSPEND_L,
-	GPIO_SPI1_NSS,
-	GPIO_AC_PRESENT_L,
-	/* Keyboard inputs */
-	GPIO_KB_IN00,
-	GPIO_KB_IN01,
-	GPIO_KB_IN02,
-	GPIO_KB_IN03,
-	GPIO_KB_IN04,
-	GPIO_KB_IN05,
-	GPIO_KB_IN06,
-	GPIO_KB_IN07,
-	/* Other inputs */
-	GPIO_WP_L,
-	/* Outputs */
-	GPIO_CHARGER_EN_L,
-	GPIO_EC_INT,
-	GPIO_EC_INT2,
-	GPIO_ID_MUX,
-	GPIO_BCHGR_OTG,
-	GPIO_BCHGR_PSEL,
-	GPIO_EN_PP3300,
-	GPIO_ENTERING_RW,
-	GPIO_BST_LED_EN,
-	GPIO_I2C1_SCL,
-	GPIO_I2C1_SDA,
-	GPIO_CHG_LED_Y,
-	GPIO_CHG_LED_G,
-	GPIO_CHG_LED_R,
-	GPIO_PMIC_PWRON,
-	GPIO_KB_OUT00,
-	GPIO_KB_OUT01,
-	GPIO_KB_OUT02,
-	GPIO_KB_OUT03,
-	GPIO_KB_OUT04,
-	GPIO_KB_OUT05,
-	GPIO_KB_OUT06,
-	GPIO_KB_OUT07,
-	GPIO_KB_OUT08,
-	GPIO_KB_OUT09,
-	GPIO_KB_OUT10,
-	GPIO_KB_OUT11,
-	GPIO_KB_OUT12,
-	/* Unimplemented */
-	GPIO_I2C2_SCL,
-	GPIO_I2C2_SDA,
-	/* Number of GPIOs; not an actual GPIO */
-	GPIO_COUNT
-};
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __BOARD_H */