diff options
Diffstat (limited to 'board/lindar/power_sequence.c')
-rw-r--r-- | board/lindar/power_sequence.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/board/lindar/power_sequence.c b/board/lindar/power_sequence.c new file mode 100644 index 0000000000..ac244c179d --- /dev/null +++ b/board/lindar/power_sequence.c @@ -0,0 +1,183 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* + * Volteer board-specific power sequencing + * Power sequencing is largely done by the platform automatically. + * However, if platform power sequencing is buggy or needs tuning, + * resistors can be stuffed on the board to allow the EC full control over + * the power sequencing. + */ + +#include "assert.h" +#include "chipset.h" +#include "console.h" +#include "gpio.h" +#include "hooks.h" +#include "system.h" + +#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args) +#define GPIO_SET_VERBOSE(signal, value) \ + gpio_set_level_verbose(CC_CHIPSET, signal, value) + +static void board_wakeup(void) +{ + CPRINTS("%s", __func__); + /* + * PP5000_USB_AG - normally enabled automatically by EN_3300_AG which + * is connected to the PSL_OUT of the Nuvoton. + * + * Assert the signal high during wakeup, deassert at hibernate + */ + GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 1); +} +DECLARE_HOOK(HOOK_INIT, board_wakeup, HOOK_PRIO_DEFAULT); + +__override void board_hibernate_late(void) +{ + CPRINTS("%s", __func__); + /* Disable PP5000_USB_AG on hibernate */ + GPIO_SET_VERBOSE(GPIO_EN_PP5000_USB_AG, 0); +} + +/* Called during S5 -> S3 transition */ +static void board_chipset_startup(void) +{ + CPRINTS("%s", __func__); + + /* + * + */ + + /* + * Power on 1.8V rail, + * tPCH06, minimum 200us from P-P3300_DSW stable to before + * VCCPRIM_1P8 starting up. + * + * The transition to S5 and S3 is gated by SLP_SUS#, which Tiger Lake + * internally delays a minimum of 95 ms from DSW_PWROK. So no delay + * needed here. + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 1); + + /* + * Power on VCCIN Aux - no delay specified, but must follow VCCPRIM_1P8 + */ + GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 1); + + /* + * Power on bypass rails - must be turned on after VCCIN aux + * + * tPCH34, maximum 50 ms from SLP_SUS# de-assertion to completion of + * primary and bypass rail, no minimum specified. + */ + GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 1); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 1); + + /* + * Power on VCCST - must be gated by SLP_S3#. No order with respect to + * other power signals specified. + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 1); + + /* + * Power on DDR rails + * No delay needed - SLP_S4# already guaranteed to be de-asserted. + * VDDQ must ramp after VPP (VDD1) for DDR4/LPDDR4 systems. + */ + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 1); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 1); +} +DECLARE_HOOK(HOOK_CHIPSET_STARTUP, board_chipset_startup, HOOK_PRIO_DEFAULT); + +/* Called during S3 -> S0 and S0ix -> S0 transition */ +static void board_chipset_resume(void) +{ + CPRINTS("%s", __func__); + /* + * Power on VCCSTG rail to Tiger Lake, no PG signal available + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 1); +} +DECLARE_HOOK(HOOK_CHIPSET_RESUME, board_chipset_resume, HOOK_PRIO_DEFAULT); + + +/* Called during S0 -> S0ix transition */ +static void board_chipset_suspend(void) +{ + CPRINTS("%s", __func__); + /* Power down VCCSTG rail */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); +} +DECLARE_HOOK(HOOK_CHIPSET_SUSPEND, board_chipset_suspend, HOOK_PRIO_DEFAULT); + +/* Called during S3 -> S5 transition */ +static void board_chipset_shutdown(void) +{ + CPRINTS("%s", __func__); + + /* + * S0 to G3 sequence 1 of 2 (shared between Deep Sx and non-Deep Sx) + * TigerLake Rail Net Name + * VCCSTG PP1050_STG_S0 + * DDR_VDDQ PP0600_VDDQ + * VCCST PP1050_ST_S0 + * DDR_VPP PP1800_DRAM + */ + GPIO_SET_VERBOSE(GPIO_EN_PP1050_STG, 0); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDDQ, 0); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_ST_S0, 0); + GPIO_SET_VERBOSE(GPIO_EN_DRAM_VDD1, 0); + + /* + * S0 to G3 sequence 2 of 2 (non-Deep Sx) + * TigerLake Name Net Name + * VCCPRIM_3P3 PP3300_A + * VCCDSW_3P3 VCCDSW_3P3 (PP3300_A) + * V5.0A PP5000_A + * VCCPRIM_1P8 PP1800_A + * VCCIN_AUX PPVAR_VCCIN_AUX + * VNN_BYPASS PPVAR_VNN_BYPASS + * V1.05A_BYPASS PP1050_A_BYPASS + */ + + /* Ice Lake shutdown already sequences first 3 rails above. */ + chipset_force_shutdown(CHIPSET_SHUTDOWN_G3); + + GPIO_SET_VERBOSE(GPIO_EN_PP1800_A, 0); + GPIO_SET_VERBOSE(GPIO_EN_PPVAR_VCCIN_AUX, 0); + GPIO_SET_VERBOSE(GPIO_EN_VNN_BYPASS, 0); + GPIO_SET_VERBOSE(GPIO_EN_PP1050_BYPASS, 0); +} +DECLARE_HOOK(HOOK_CHIPSET_SHUTDOWN, board_chipset_shutdown, HOOK_PRIO_DEFAULT); + +/** + * Handle C10_GATE transitions - see VCCSTG enable logic (figure 232, page 406) + * in Tiger Lake PDG, revision 1.0. + * + * TODO: b/141322107 - This function can be promoted to common TigerLake power + * file if CPU_C10_GATE_L support provided by the platform is not sufficient. + */ +void c10_gate_change(enum gpio_signal signal) +{ + /* Pass through CPU_C10_GATE_L as enable for VCCSTG rail */ + int c10_gate_in; + int vccstg_out; + + ASSERT(signal == GPIO_CPU_C10_GATE_L); + + c10_gate_in = gpio_get_level(signal); + vccstg_out = gpio_get_level(GPIO_EN_PP1050_STG); + + if (vccstg_out == c10_gate_in) + return; + + gpio_set_level(GPIO_EN_PP1050_STG, c10_gate_in); +} + + + + + |