diff options
Diffstat (limited to 'board/madoo/usb_pd_policy.c')
-rw-r--r-- | board/madoo/usb_pd_policy.c | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/board/madoo/usb_pd_policy.c b/board/madoo/usb_pd_policy.c new file mode 100644 index 0000000000..905e049937 --- /dev/null +++ b/board/madoo/usb_pd_policy.c @@ -0,0 +1,66 @@ +/* Copyright 2020 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +#include "charge_manager.h" +#include "chipset.h" +#include "common.h" +#include "console.h" +#include "driver/tcpm/tcpci.h" +#include "usb_pd.h" + +#define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) +#define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) + +int pd_check_vconn_swap(int port) +{ + /* Allow VCONN swaps if the AP is on. */ + return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON); +} + +void pd_power_supply_reset(int port) +{ + /* Disable VBUS */ + tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); + +#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT + /* Give back the current quota we are no longer using */ + charge_manager_source_port(port, 0); +#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); +} + +int pd_set_power_supply_ready(int port) +{ + int rv; + + if (port >= board_get_usb_pd_port_count()) + return EC_ERROR_INVAL; + + /* Disable charging. */ + rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); + if (rv) + return rv; + + /* Our policy is not to source VBUS when the AP is off. */ + if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) + return EC_ERROR_NOT_POWERED; + + /* Provide Vbus. */ + rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); + if (rv) + return rv; + +#ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT + /* Ensure we advertise the proper available current quota */ + charge_manager_source_port(port, 1); +#endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ + + /* Notify host of power info change. */ + pd_send_host_event(PD_EVENT_POWER_CHANGE); + + return EC_SUCCESS; +} |