diff options
Diffstat (limited to 'board/mchpevb1/board.c')
-rw-r--r-- | board/mchpevb1/board.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/board/mchpevb1/board.c b/board/mchpevb1/board.c index f11e65302b..9056f904dd 100644 --- a/board/mchpevb1/board.c +++ b/board/mchpevb1/board.c @@ -66,14 +66,14 @@ /* NOTE: MEC17xx EVB + SKL RVP3 does not use BD99992 PMIC. * RVP3 PMIC controlled by RVP3 logic. */ -#define I2C_ADDR_BD99992__7bf 0x30 +#define I2C_ADDR_BD99992_FLAGS 0x30 /* * Maxim DS1624 I2C temperature sensor used for testing I2C. * DS1624 contains one internal temperature sensor * and EEPROM. It has no external temperature inputs. */ -#define DS1624_I2C_ADDR__7bf (0x48 | I2C_FLAG_BIG_ENDIAN) +#define DS1624_I2C_ADDR_FLAGS (0x48 | I2C_FLAG_BIG_ENDIAN) #define DS1624_IDX_LOCAL 0 #define DS1624_READ_TEMP16 0xAA /* read 16-bit temperature */ #define DS1624_ACCESS_CFG 0xAC /* read/write 8-bit config */ @@ -265,11 +265,11 @@ int board_i2c_p2c(int port) #ifdef CONFIG_USB_POWER_DELIVERY const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { {I2C_PORT_TCPC, - CONFIG_TCPC_I2C_BASE_ADDR__7BF, + CONFIG_TCPC_I2C_BASE_ADDR_FLAGS, &tcpci_tcpm_drv}, {I2C_PORT_TCPC, - CONFIG_TCPC_I2C_BASE_ADDR__7BF + 1, + CONFIG_TCPC_I2C_BASE_ADDR_FLAGS + 1, &tcpci_tcpm_drv}, }; #endif @@ -510,14 +510,14 @@ static void board_pmic_init(void) /* Config DS1624 temperature sensor for continuous conversion */ cfg = 0x66; - rv = i2c_read8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, - DS1624_ACCESS_CFG, &cfg); + rv = i2c_read8(I2C_PORT_THERMAL, DS1624_I2C_ADDR_FLAGS, + DS1624_ACCESS_CFG, &cfg); trace2(0, BRD, 0, "Read DS1624 Config rv = %d cfg = 0x%02X", rv, cfg); if ((rv == EC_SUCCESS) && (cfg & (1u << 0))) { /* one-shot mode switch to continuous */ - rv = i2c_write8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, + rv = i2c_write8(I2C_PORT_THERMAL, DS1624_I2C_ADDR_FLAGS, DS1624_ACCESS_CFG, 0); trace1(0, BRD, 0, "Write DS1624 Config to 0, rv = %d", rv); /* writes to config require 10ms until next I2C command */ @@ -526,7 +526,7 @@ static void board_pmic_init(void) } /* Send start command */ - rv = i2c_write8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, + rv = i2c_write8(I2C_PORT_THERMAL, DS1624_I2C_ADDR_FLAGS, DS1624_CMD_START, 1); trace1(0, BRD, 0, "Send Start command to DS1624 rv = %d", rv); @@ -869,7 +869,7 @@ static void ds1624_update(void) int temp; int rv __attribute__((unused)); - rv = i2c_read16__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, + rv = i2c_read16(I2C_PORT_THERMAL, DS1624_I2C_ADDR_FLAGS, DS1624_READ_TEMP16, &temp); d = (temp & 0x7FFF) >> 8; @@ -932,7 +932,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr__7bf = SLAVE_MK_SPI_ADDR__7bf( + .i2c_spi_addr_flags = SLAVE_MK_SPI_ADDR_FLAGS( CONFIG_SPI_ACCEL_PORT), .rot_standard_ref = NULL, /* Identity matrix. */ .default_range = 2, /* g, enough for laptop. */ @@ -957,7 +957,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = CONFIG_SPI_ACCEL_PORT, - .i2c_spi_addr__7bf = SLAVE_MK_SPI_ADDR__7bf( + .i2c_spi_addr_flags = SLAVE_MK_SPI_ADDR_FLAGS( CONFIG_SPI_ACCEL_PORT), .default_range = 1000, /* dps */ .rot_standard_ref = NULL, /* Identity Matrix. */ @@ -975,7 +975,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_kx022_data, .port = I2C_PORT_ACCEL, - .i2c_spi_addr__7bf = KX022_ADDR1__7bf, + .i2c_spi_addr_flags = KX022_ADDR1_FLAGS, .rot_standard_ref = NULL, /* Identity matrix. */ .default_range = 2, /* g, enough for laptop. */ .min_frequency = KX022_ACCEL_MIN_FREQ, |