diff options
Diffstat (limited to 'board/mchpevb1')
-rw-r--r-- | board/mchpevb1/battery.c | 8 | ||||
-rw-r--r-- | board/mchpevb1/board.c | 34 | ||||
-rw-r--r-- | board/mchpevb1/board.h | 2 |
3 files changed, 25 insertions, 19 deletions
diff --git a/board/mchpevb1/battery.c b/board/mchpevb1/battery.c index 016d225950..d6c702127e 100644 --- a/board/mchpevb1/battery.c +++ b/board/mchpevb1/battery.c @@ -47,10 +47,10 @@ int board_cut_off_battery(void) buf[2] = PARAM_CUT_OFF_HIGH; i2c_lock(I2C_PORT_BATTERY, 1); - rv = i2c_xfer_unlocked(I2C_PORT_BATTERY, BATTERY_ADDR, buf, 3, NULL, 0, - I2C_XFER_SINGLE); - rv |= i2c_xfer_unlocked(I2C_PORT_BATTERY, BATTERY_ADDR, buf, 3, NULL, 0, - I2C_XFER_SINGLE); + rv = i2c_xfer_unlocked__7bf(I2C_PORT_BATTERY, BATTERY_ADDR__7bf, + buf, 3, NULL, 0, I2C_XFER_SINGLE); + rv |= i2c_xfer_unlocked__7bf(I2C_PORT_BATTERY, BATTERY_ADDR__7bf, + buf, 3, NULL, 0, I2C_XFER_SINGLE); i2c_lock(I2C_PORT_BATTERY, 0); return rv; diff --git a/board/mchpevb1/board.c b/board/mchpevb1/board.c index 7f4bb26c46..f11e65302b 100644 --- a/board/mchpevb1/board.c +++ b/board/mchpevb1/board.c @@ -66,14 +66,14 @@ /* NOTE: MEC17xx EVB + SKL RVP3 does not use BD99992 PMIC. * RVP3 PMIC controlled by RVP3 logic. */ -#define I2C_ADDR_BD99992 0x60 +#define I2C_ADDR_BD99992__7bf 0x30 /* * Maxim DS1624 I2C temperature sensor used for testing I2C. * DS1624 contains one internal temperature sensor * and EEPROM. It has no external temperature inputs. */ -#define DS1624_I2C_ADDR 0x90 /* 7-bit address is 0x48 */ +#define DS1624_I2C_ADDR__7bf (0x48 | I2C_FLAG_BIG_ENDIAN) #define DS1624_IDX_LOCAL 0 #define DS1624_READ_TEMP16 0xAA /* read 16-bit temperature */ #define DS1624_ACCESS_CFG 0xAC /* read/write 8-bit config */ @@ -264,8 +264,13 @@ int board_i2c_p2c(int port) #ifdef CONFIG_USB_POWER_DELIVERY const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { - {I2C_PORT_TCPC, CONFIG_TCPC_I2C_BASE_ADDR, &tcpci_tcpm_drv}, - {I2C_PORT_TCPC, CONFIG_TCPC_I2C_BASE_ADDR + 2, &tcpci_tcpm_drv}, + {I2C_PORT_TCPC, + CONFIG_TCPC_I2C_BASE_ADDR__7BF, + &tcpci_tcpm_drv}, + + {I2C_PORT_TCPC, + CONFIG_TCPC_I2C_BASE_ADDR__7BF + 1, + &tcpci_tcpm_drv}, }; #endif @@ -384,11 +389,11 @@ BUILD_ASSERT(ARRAY_SIZE(pi3usb9281_chips) == struct usb_mux usb_muxes[CONFIG_USB_PD_PORT_COUNT] = { { - .port_addr = 0xa8, + .port_addr = 0x54, .driver = &pi3usb30532_usb_mux_driver, }, { - .port_addr = 0x20, + .port_addr = 0x10, .driver = &ps874x_usb_mux_driver, } }; @@ -505,14 +510,14 @@ static void board_pmic_init(void) /* Config DS1624 temperature sensor for continuous conversion */ cfg = 0x66; - rv = i2c_read8(I2C_PORT_THERMAL, DS1624_I2C_ADDR, + rv = i2c_read8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, DS1624_ACCESS_CFG, &cfg); trace2(0, BRD, 0, "Read DS1624 Config rv = %d cfg = 0x%02X", rv, cfg); if ((rv == EC_SUCCESS) && (cfg & (1u << 0))) { /* one-shot mode switch to continuous */ - rv = i2c_write8(I2C_PORT_THERMAL, DS1624_I2C_ADDR, + rv = i2c_write8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, DS1624_ACCESS_CFG, 0); trace1(0, BRD, 0, "Write DS1624 Config to 0, rv = %d", rv); /* writes to config require 10ms until next I2C command */ @@ -521,7 +526,7 @@ static void board_pmic_init(void) } /* Send start command */ - rv = i2c_write8(I2C_PORT_THERMAL, DS1624_I2C_ADDR, + rv = i2c_write8__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, DS1624_CMD_START, 1); trace1(0, BRD, 0, "Send Start command to DS1624 rv = %d", rv); @@ -864,8 +869,7 @@ static void ds1624_update(void) int temp; int rv __attribute__((unused)); - rv = i2c_read16(I2C_PORT_THERMAL, - (DS1624_I2C_ADDR | I2C_FLAG_BIG_ENDIAN), + rv = i2c_read16__7bf(I2C_PORT_THERMAL, DS1624_I2C_ADDR__7bf, DS1624_READ_TEMP16, &temp); d = (temp & 0x7FFF) >> 8; @@ -928,7 +932,8 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = CONFIG_SPI_ACCEL_PORT, - .addr = BMI160_SET_SPI_ADDRESS(CONFIG_SPI_ACCEL_PORT), + .i2c_spi_addr__7bf = SLAVE_MK_SPI_ADDR__7bf( + CONFIG_SPI_ACCEL_PORT), .rot_standard_ref = NULL, /* Identity matrix. */ .default_range = 2, /* g, enough for laptop. */ .min_frequency = BMI160_ACCEL_MIN_FREQ, @@ -952,7 +957,8 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = CONFIG_SPI_ACCEL_PORT, - .addr = BMI160_SET_SPI_ADDRESS(CONFIG_SPI_ACCEL_PORT), + .i2c_spi_addr__7bf = SLAVE_MK_SPI_ADDR__7bf( + CONFIG_SPI_ACCEL_PORT), .default_range = 1000, /* dps */ .rot_standard_ref = NULL, /* Identity Matrix. */ .min_frequency = BMI160_GYRO_MIN_FREQ, @@ -969,7 +975,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_kx022_data, .port = I2C_PORT_ACCEL, - .addr = KX022_ADDR1, + .i2c_spi_addr__7bf = KX022_ADDR1__7bf, .rot_standard_ref = NULL, /* Identity matrix. */ .default_range = 2, /* g, enough for laptop. */ .min_frequency = KX022_ACCEL_MIN_FREQ, diff --git a/board/mchpevb1/board.h b/board/mchpevb1/board.h index 0dbfe2bb3c..8fcaadc4bf 100644 --- a/board/mchpevb1/board.h +++ b/board/mchpevb1/board.h @@ -400,7 +400,7 @@ #endif /* Ambient Light Sensor address */ -#define OPT3001_I2C_ADDR OPT3001_I2C_ADDR1 +#define OPT3001_I2C_ADDR__7bf OPT3001_I2C_ADDR1__7bf /* Modules we want to exclude */ #undef CONFIG_CMD_HASH |