diff options
Diffstat (limited to 'board/nautilus/board.c')
-rw-r--r-- | board/nautilus/board.c | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/board/nautilus/board.c b/board/nautilus/board.c index bf89d0edad..5f79473bd7 100644 --- a/board/nautilus/board.c +++ b/board/nautilus/board.c @@ -151,7 +151,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { .bus_type = EC_BUS_TYPE_I2C, .i2c_info = { .port = NPCX_I2C_PORT0_0, - .addr__7bf = PS8751_I2C_ADDR1__7bf, + .addr_flags = PS8751_I2C_ADDR1_FLAGS, }, .drv = &ps8xxx_tcpm_drv, }, @@ -159,7 +159,7 @@ const struct tcpc_config_t tcpc_config[CONFIG_USB_PD_PORT_COUNT] = { .bus_type = EC_BUS_TYPE_I2C, .i2c_info = { .port = NPCX_I2C_PORT0_1, - .addr__7bf = PS8751_I2C_ADDR1__7bf, + .addr_flags = PS8751_I2C_ADDR1_FLAGS, }, .drv = &ps8xxx_tcpm_drv, }, @@ -268,7 +268,7 @@ static void board_report_pmic_fault(const char *str) uint32_t info; /* RESETIRQ1 -- Bit 4: VRFAULT */ - if (i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, &vrfault) + if (i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, &vrfault) != EC_SUCCESS) return; @@ -278,19 +278,19 @@ static void board_report_pmic_fault(const char *str) /* VRFAULT has occurred, print VRFAULT status bits. */ /* PWRSTAT1 */ - i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, &pwrstat1); + i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, &pwrstat1); /* PWRSTAT2 */ - i2c_read8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, &pwrstat2); + i2c_read8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, &pwrstat2); CPRINTS("PMIC VRFAULT: %s", str); CPRINTS("PMIC VRFAULT: PWRSTAT1=0x%02x PWRSTAT2=0x%02x", pwrstat1, pwrstat2); /* Clear all faults -- Write 1 to clear. */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x8, BIT(4)); - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x16, pwrstat1); - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x17, pwrstat2); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x8, BIT(4)); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x16, pwrstat1); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x17, pwrstat2); /* * Status of the fault registers can be checked in the OS by looking at @@ -309,7 +309,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x3a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x3a); /* * V18ACNT: @@ -318,7 +318,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x2a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x2a); /* * V100ACNT: @@ -327,7 +327,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x1a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x1a); /* * V085ACNT: @@ -336,7 +336,7 @@ static void board_pmic_disable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x3a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x3a); } static void board_pmic_enable_slp_s0_vr_decay(void) @@ -348,7 +348,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x30, 0x7a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x30, 0x7a); /* * V18ACNT: @@ -357,7 +357,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x34, 0x6a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x34, 0x6a); /* * V100ACNT: @@ -366,7 +366,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x37, 0x5a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x37, 0x5a); /* * V085ACNT: @@ -375,7 +375,7 @@ static void board_pmic_enable_slp_s0_vr_decay(void) * Bits 3:2 (10) - VR set to AUTO on SLP_S0# de-assertion * Bits 1:0 (10) - VR set to AUTO operating mode */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x38, 0x7a); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x38, 0x7a); } void power_board_handle_host_sleep_event(enum host_sleep_event state) @@ -394,12 +394,12 @@ static void board_pmic_init(void) return; /* DISCHGCNT3 - enable 100 ohm discharge on V1.00A */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3e, 0x04); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3e, 0x04); board_pmic_disable_slp_s0_vr_decay(); /* VRMODECTRL - disable low-power mode for all rails */ - i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x3b, 0x1f); + i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x3b, 0x1f); } DECLARE_DEFERRED(board_pmic_init); @@ -535,7 +535,7 @@ void board_hibernate(void) uart_flush_output(); /* Trigger PMIC shutdown. */ - if (i2c_write8__7bf(I2C_PORT_PMIC, I2C_ADDR_BD99992__7bf, 0x49, 0x01)) { + if (i2c_write8(I2C_PORT_PMIC, I2C_ADDR_BD99992_FLAGS, 0x49, 0x01)) { /* * If we can't tell the PMIC to shutdown, instead reset * and don't start the AP. Hopefully we'll be able to @@ -611,7 +611,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_lid_mutex, .drv_data = &g_bma255_data, .port = I2C_PORT_ACCEL, - .i2c_spi_addr__7bf = BMA2x2_I2C_ADDR1__7bf, + .i2c_spi_addr_flags = BMA2x2_I2C_ADDR1_FLAGS, .rot_standard_ref = &lid_standard_ref, .min_frequency = BMA255_ACCEL_MIN_FREQ, .max_frequency = BMA255_ACCEL_MAX_FREQ, @@ -637,7 +637,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = I2C_PORT_ACCEL, - .i2c_spi_addr__7bf = BMI160_ADDR0__7bf, + .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, .rot_standard_ref = &base_standard_ref, .min_frequency = BMI160_ACCEL_MIN_FREQ, .max_frequency = BMI160_ACCEL_MAX_FREQ, @@ -664,7 +664,7 @@ struct motion_sensor_t motion_sensors[] = { .mutex = &g_base_mutex, .drv_data = &g_bmi160_data, .port = I2C_PORT_ACCEL, - .i2c_spi_addr__7bf = BMI160_ADDR0__7bf, + .i2c_spi_addr_flags = BMI160_ADDR0_FLAGS, .default_range = 1000, /* dps */ .rot_standard_ref = &base_standard_ref, .min_frequency = BMI160_GYRO_MIN_FREQ, @@ -747,17 +747,17 @@ int board_has_working_reset_flags(void) #define BATTERY_FREE_MIN_DELTA_US (5 * MSEC) static timestamp_t battery_last_i2c_time; -static int is_battery_i2c__7bf(const int port, const uint16_t slave_addr__7bf) +static int is_battery_i2c(const int port, const uint16_t slave_addr_flags) { return (port == I2C_PORT_BATTERY) - && (slave_addr__7bf == BATTERY_ADDR__7bf); + && (slave_addr_flags == BATTERY_ADDR_FLAGS); } -void i2c_start_xfer_notify__7bf(const int port, const uint16_t slave_addr__7bf) +void i2c_start_xfer_notify(const int port, const uint16_t slave_addr_flags) { unsigned int time_delta_us; - if (!is_battery_i2c__7bf(port, slave_addr__7bf)) + if (!is_battery_i2c(port, slave_addr_flags)) return; time_delta_us = time_since32(battery_last_i2c_time); @@ -767,9 +767,9 @@ void i2c_start_xfer_notify__7bf(const int port, const uint16_t slave_addr__7bf) usleep(BATTERY_FREE_MIN_DELTA_US - time_delta_us); } -void i2c_end_xfer_notify__7bf(const int port, const uint16_t slave_addr__7bf) +void i2c_end_xfer_notify(const int port, const uint16_t slave_addr_flags) { - if (!is_battery_i2c__7bf(port, slave_addr__7bf)) + if (!is_battery_i2c(port, slave_addr_flags)) return; battery_last_i2c_time = get_time(); |