diff options
Diffstat (limited to 'board/nocturne_fp/gpio_rw.inc')
-rw-r--r-- | board/nocturne_fp/gpio_rw.inc | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/board/nocturne_fp/gpio_rw.inc b/board/nocturne_fp/gpio_rw.inc deleted file mode 100644 index 2de4c3e92a..0000000000 --- a/board/nocturne_fp/gpio_rw.inc +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright 2021 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#ifndef SECTION_IS_RW -#error "This file should only be included in RW." -#endif - -/* Interrupts */ -GPIO_INT(FPS_INT, PIN(A, 0), GPIO_INT_RISING, fps_event) - -#ifdef APPLY_RESET_LOOP_FIX -GPIO_INT(WP, PIN(B, 7), GPIO_INT_BOTH, wp_event) -#endif - -/* Inputs */ -GPIO_INT(SLP_ALT_DEV_L, PIN(D,14), GPIO_INT_BOTH, slp_event) -/* - * The S4 and SUS sleep lines are unused in code, but are maintained in this - * gpio list to ensure that they are not repurposed. This is because these - * inputs are driven on nocturne. - */ -GPIO(PCH_SLP_S4_L, PIN(D, 8), GPIO_INPUT) -GPIO(PCH_SLP_SUS_L, PIN(D, 3), GPIO_INPUT) -/* TODO(b/178808871): Only enable pull up when doing detection. */ -GPIO(FP_SPI_SEL, PIN(E, 1), GPIO_INPUT | GPIO_PULL_UP) - -/* Outputs */ -GPIO(DIVIDER_HIGHSIDE, PIN(B, 8), GPIO_OUT_LOW) -GPIO(FP_RST_ODL, PIN(E, 0), GPIO_OUT_HIGH) -GPIO(SPI4_NSS, PIN(E, 4), GPIO_OUT_HIGH) -GPIO(SPI4_ALT_NSS, PIN(E, 11), GPIO_OUT_HIGH) -GPIO(USER_PRES_L, PIN(C, 5), GPIO_ODR_HIGH) - -/* Default SPI4 master to sensor: PE2/5/6 (CLK/MISO/MOSI) */ -ALTERNATE(PIN_MASK(E, 0x0064), GPIO_ALT_SPI, MODULE_SPI_CONTROLLER, 0) - -/* See board_rw.c for the alternate configuration that we use on - * development boards, which overrides the UNUSED values below. - */ -UNUSED(PIN(E, 12)) /* Alternate SPI4 master to sensor CLK */ -UNUSED(PIN(E, 13)) /* Alternate SPI4 master to sensor MISO */ -UNUSED(PIN(E, 14)) /* Alternate SPI4 master to sensor MOSI */ |