diff options
Diffstat (limited to 'board/npcx7_evb/board.c')
-rw-r--r-- | board/npcx7_evb/board.c | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/board/npcx7_evb/board.c b/board/npcx7_evb/board.c new file mode 100644 index 0000000000..6822a49a43 --- /dev/null +++ b/board/npcx7_evb/board.c @@ -0,0 +1,118 @@ +/* Copyright 2017 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + */ + +/* Nuvoton M4 EB board-specific configuration */ + +#include "adc.h" +#include "adc_chip.h" +#include "backlight.h" +#include "chipset.h" +#include "common.h" +#include "driver/temp_sensor/tmp006.h" +#include "extpower.h" +#include "fan.h" +#include "fan_chip.h" +#include "gpio.h" +#include "i2c.h" +#include "keyboard_scan.h" +#include "lid_switch.h" +#include "peci.h" +#include "power.h" +#include "power_button.h" +#include "pwm.h" +#include "pwm_chip.h" +#include "registers.h" +#include "spi.h" +#include "switch.h" +#include "temp_sensor.h" +#include "temp_sensor_chip.h" +#include "timer.h" +#include "thermal.h" +#include "util.h" + +#include "gpio_list.h" + +/******************************************************************************/ +/* ADC channels. Must be in the exactly same order as in enum adc_channel. */ +const struct adc_t adc_channels[] = { + [ADC_CH_0] = {"ADC0", NPCX_ADC_CH0, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_CH_1] = {"ADC1", NPCX_ADC_CH1, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_CH_2] = {"ADC2", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_CH_3] = {"ADC3", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, + [ADC_CH_4] = {"ADC4", NPCX_ADC_CH2, ADC_MAX_VOLT, ADC_READ_MAX+1, 0}, +}; +BUILD_ASSERT(ARRAY_SIZE(adc_channels) == ADC_CH_COUNT); + +/******************************************************************************/ +/* PWM channels. Must be in the exactly same order as in enum pwm_channel. */ +const struct pwm_t pwm_channels[] = { + [PWM_CH_FAN] = { 0, PWM_CONFIG_OPEN_DRAIN, 25000}, + [PWM_CH_KBLIGHT] = { 2, 0, 10000 }, +}; +BUILD_ASSERT(ARRAY_SIZE(pwm_channels) == PWM_CH_COUNT); + +/******************************************************************************/ +/* Physical fans. These are logically separate from pwm_channels. */ +const struct fan_t fans[] = { + [FAN_CH_0] = { + .flags = FAN_USE_RPM_MODE, + .rpm_min = 1000, + .rpm_start = 1000, + .rpm_max = 5200, + .ch = 0,/* Use MFT id to control fan */ + .pgood_gpio = GPIO_PGOOD_FAN, + .enable_gpio = -1, + }, +}; +BUILD_ASSERT(ARRAY_SIZE(fans) == FAN_CH_COUNT); + +/******************************************************************************/ +/* MFT channels. These are logically separate from pwm_channels. */ +const struct mft_t mft_channels[] = { + [MFT_CH_0] = { NPCX_MFT_MODULE_1, TCKC_LFCLK, PWM_CH_FAN}, +}; +BUILD_ASSERT(ARRAY_SIZE(mft_channels) == MFT_CH_COUNT); + +/******************************************************************************/ +/* I2C ports */ +const struct i2c_port_t i2c_ports[] = { + {"master0-0", NPCX_I2C_PORT0_0, 100, GPIO_I2C0_SCL0, GPIO_I2C0_SDA0}, + {"master1-0", NPCX_I2C_PORT1_0, 100, GPIO_I2C1_SCL0, GPIO_I2C1_SDA0}, + {"master2-0", NPCX_I2C_PORT2_0, 100, GPIO_I2C2_SCL0, GPIO_I2C2_SDA0}, + {"master3-0", NPCX_I2C_PORT3_0, 100, GPIO_I2C3_SCL0, GPIO_I2C3_SDA0}, + {"master7-0", NPCX_I2C_PORT7_0, 100, GPIO_I2C7_SCL0, GPIO_I2C7_SDA0}, +}; +const unsigned int i2c_ports_used = ARRAY_SIZE(i2c_ports); + +/******************************************************************************/ +/* SPI devices */ +const struct spi_device_t spi_devices[] = { + { CONFIG_SPI_FLASH_PORT, 0, GPIO_SPI_CS_L}, +}; +const unsigned int spi_devices_used = ARRAY_SIZE(spi_devices); + +/******************************************************************************/ +/* Wake-up pins for hibernate */ +const enum gpio_signal hibernate_wake_pins[] = { + GPIO_AC_PRESENT, + GPIO_LID_OPEN, + GPIO_POWER_BUTTON_L, +}; +const int hibernate_wake_pins_used = ARRAY_SIZE(hibernate_wake_pins); + +/******************************************************************************/ +/* Keyboard scan setting */ +struct keyboard_scan_config keyscan_config = { + .output_settle_us = 40, + .debounce_down_us = 6 * MSEC, + .debounce_up_us = 30 * MSEC, + .scan_period_us = 1500, + .min_post_scan_delay_us = 1000, + .poll_timeout_us = SECOND, + .actual_key_mask = { + 0x14, 0xff, 0xff, 0xff, 0xff, 0xf5, 0xff, + 0xa4, 0xff, 0xf6, 0x55, 0xfa, 0xc8 /* full set */ + }, +}; |